Close-up of traditional fountain pen with an iridium-tipped stainless steel nib
Modern, demonstrator, and traditional fountain pens
Various contemporary and vintage fountain pens (left to right):
  • Pilot Justus 95
  • Pelikan Souverän M1000
  • Montblanc Meisterstück 149
  • Pilot Heritage 912
  • Parker Duofold Centennial
  • Sheaffer Snorkel Admiral
  • Lamy Dialog 3
  • Welty
  • Parker Sonnet
  • Conway Stewart 55
  • Waterman Thorobred
  • Mabie Todd Swan 3220

A fountain pen is a writing instrument that uses a metal nib to apply water-based ink, or special pigment ink—suitable for fountain pens—to paper. It is distinguished from earlier dip pens by using an internal reservoir to hold ink, eliminating the need to repeatedly dip the pen in an inkwell during use. The pen draws ink from the reservoir through a feed to the nib and deposits the ink on paper via a combination of gravity and capillary action. Filling the reservoir with ink may be achieved manually, via the use of an eyedropper or syringe, or via an internal filling mechanism that creates suction (for example, through a piston mechanism) or a vacuum to transfer ink directly through the nib into the reservoir. Some pens employ removable reservoirs in the form of pre-filled ink cartridges.[1]

History

Early prototypes of reservoir pens

According to Qadi al-Nu'man al-Tamimi (d.974) in his Kitab al-Majalis wa 'l-musayarat, the Fatimid caliph Al-Mu'izz li-Din Allah in Arab Egypt demanded a pen that would not stain his hands or clothes, and was provided with a pen that held ink in a reservoir, allowing it to be held upside-down without leaking.[2]

There is compelling evidence that a working fountain pen was constructed and used during the Renaissance by artist and inventor Leonardo da Vinci. Leonardo's journals contain drawings with cross-sections of what appears to be a reservoir pen that works by both gravity and capillary action. Historians also took note of the fact that the handwriting in the inventor's surviving journals is of a consistent contrast throughout, rather than exhibiting the characteristic fading pattern typical of a quill pen caused by expending and re-dipping. While no physical item survives, several working models were reconstructed in 2011 by artist Amerigo Bombara that have since been put on display in museums dedicated to Leonardo.[3]

An early fountain pen patent awarded by the French Government to the Romanian inventor Petrache Poenaru on 25 May 1827
M. Klein and Henry W. Wynne received U.S. Patent 68,445 in 1867 for an ink chamber and delivery system in the handle of the fountain pen

European reservoir models

Deliciae physico-mathematicae, 1636

The fountain pen was available in Europe in the 17th century and is shown by contemporary references. In Deliciae Physico-Mathematicae (a 1636 magazine), German inventor Daniel Schwenter described a pen made from two quills. One quill served as a reservoir for ink inside the other quill. The ink was sealed inside the quill with cork. Ink was squeezed through a small hole to the writing point.[4] In 1663 Samuel Pepys referred to a metal pen "to carry ink".[5] Noted Maryland historian Hester Dorsey Richardson (1862–1933) documented a reference to "three silver fountain pens, worth 15 shillings" in England during the reign of Charles II, c. 1649–1685.[6] By the early 18th century such pens were already commonly known as "fountain pens".[7] Hester Dorsey Richardson also found a 1734 notation made by Robert Morris the elder in the ledger of the expenses of Robert Morris the younger, who was at the time in Philadelphia, for "one fountain pen".[6] Perhaps the best-known reference, however, is that of Nicholas Bion (1652–1733), whose illustrated description of a "plume sans fin" was published in 1709 in his treatise published in English in 1723 as "The Construction and Principal Uses of Mathematical Instruments". The earliest datable pen of the form described by Bion is inscribed 1702, while other examples bear French hallmarks as late as the early 19th century.

First patents

Progress in developing a reliable pen was slow until the mid-19th century because of an imperfect understanding of the role that air pressure plays in the operation of pens. Furthermore, most inks were highly corrosive and full of sedimentary inclusions. The first English patent for a fountain pen was issued in May 1809 to Frederick Fölsch, with a patent covering (among other things) an improved fountain pen feed issued to Joseph Bramah in September 1809. John Scheffer's patent of 1819 was the first design to see commercial success, with a number of surviving examples of his "Penographic" known. Another noteworthy pioneer design was John Jacob Parker's, patented in 1832 – a self-filler with a screw-operated piston.[8] The Romanian inventor Petrache Poenaru received a French patent on May 25, 1827, for the invention of a fountain pen with a barrel made from a large swan quill.[9]

Mass-manufactured nibs

In 1828, Josiah Mason improved a cheap and efficient slip-in nib in Birmingham, England, which could be added to a fountain pen and in 1830, with the invention of a new machine, William Joseph Gillott, William Mitchell, and James Stephen Perry devised a way to mass manufacture robust, cheap steel pen nibs (Perry & Co.).[10] This boosted the Birmingham pen trade and by the 1850s, more than half the steel-nib pens manufactured in the world were made in Birmingham. Thousands of skilled craftsmen were employed in the industry.[11] Many new manufacturing techniques were perfected, enabling the city's factories to mass-produce their pens cheaply and efficiently. These were sold worldwide to many who previously could not afford to write, thus encouraging the development of education and literacy.[12]

New patents and inventions

In 1848, American inventor Azel Storrs Lyman patented a pen with "a combined holder and nib".[13] From the 1850s, there was a steadily accelerating stream of fountain pen patents and pens in production. However, it was only after three key inventions were in place that the fountain pen became a widely popular writing instrument. Those were the iridium-tipped gold nib, hard rubber, and free-flowing ink.[9]

Waterman 42 Safety Pen, with variation in materials (both red and black hard vulcanized rubbers or ebonite) and retracting nibs
Parker Duofold, c. 1924

The first fountain pens making use of all these key ingredients appeared in the 1850s. In the 1870s Duncan MacKinnon, a Canadian living in New York City, and Alonzo T. Cross of Providence, Rhode Island, created stylographic pens with a hollow, tubular nib and a wire acting as a valve.[14][15] Stylographic pens are now used mostly for drafting and technical drawing but were very popular in the decade beginning in 1875. In the 1880s the era of the mass-produced fountain pen finally began. The dominant American producers in this pioneer era were Waterman, of New York City, and Wirt, based in Bloomsburg, Pennsylvania. Waterman soon outstripped Wirt, along with many companies that sprang up to fill the new and growing fountain pen market. Waterman remained the market leader until the early 1920s.[16]

At this time, fountain pens were almost all filled by unscrewing a portion of the hollow barrel or holder and inserting the ink by means of an eyedropper – a slow and messy procedure. Pens also tended to leak inside their caps and at the joint where the barrel opened for filling.[17] Now that the materials' problems had been overcome and the flow of ink while writing had been regulated, the next problems to be solved were the creation of a simple, convenient self-filler and the problem of leakage. In 1890, W. B. Purvis patented a self-filler. Self-fillers began to arrive around the turn of the century; the most successful of these was probably the Conklin crescent-filler, followed by A. A. Waterman's twist-filler.[18][19] The tipping point, however, was the runaway success of Walter A. Sheaffer's lever-filler, introduced in 1912,[20] paralleled by Parker's roughly contemporary button-filler.

Pen leakage

Meanwhile, many inventors turned their attention to the problem of leakage.[21] Some of the earliest solutions to this problem came in the form of a "safety" pen with a retractable point that allowed the ink reservoir to be corked like a bottle. The most successful of these came from Francis C. Brown of the Caw's Pen and Ink Co. and from Morris W. Moore of Boston.[22]

In 1898, George Safford Parker released the Parker Jointless, named so because its barrel was single-piece to prevent leakage. The section assembly fit into the pen's end like a cork stopper; any leaked ink was kept inside the nib.[23]

"Waterman's ideal fountain pen" 1908 ad

In 1908, Waterman began marketing a popular safety pen of its own.[24] For pens with non-retractable nibs, the adoption of screw-on caps with inner caps that sealed around the nib by bearing against the front of the section effectively solved the leakage problem (such pens were also marketed as "safety pens", as with the Parker Jack Knife Safety and the Swan Safety Screw-Cap).[25][26]

Further innovation

Lever filler pen made of celluloid by Mabie Todd & Co. New York (1927)

In Europe, the German supplies company which came to be known as Pelikan was started in 1838, and they first introduced their pen in 1929.[27] This was based upon the acquisition of patents for solid-ink fountain pens from the factory of Slavoljub Penkala from Croatia (patented 1907, in mass production since 1911), and the patent of the Hungarian Theodor Kovacs for the modern piston filler by 1925.[28]

The decades that followed saw many technological innovations in the manufacture of fountain pens. Celluloid gradually replaced hard rubber, which enabled production in a much wider range of colors and designs.[29] At the same time, manufacturers experimented with new filling systems. The inter-war period saw the introduction of some of the most notable models, such as the Parker Duofold[30] and Vacumatic,[31] Sheaffer's Lifetime Balance series,[32] and the Pelikan 100.[33]

During the 1940s and 1950s, fountain pens retained their dominance: early ballpoint pens were expensive, were prone to leaks and had irregular inkflow, while the fountain pen continued to benefit from the combination of mass production and craftsmanship. (Bíró's patent, and other early patents on ball-point pens often used the term "ball-point fountain pen," because at the time the ball-point pen was considered a type of fountain pen; that is, a pen that held ink in an enclosed reservoir.)[34] This period saw the launch of innovative models such as the Parker 51, the Aurora 88, the Sheaffer Snorkel, and the Eversharp Skyline and (later) Skyliner, while the Esterbrook J series of lever-fill models with interchangeable steel nibs offered inexpensive reliability to the masses.[35][36]

Lamy 2000 piston filler made of polycarbonate and stainless steel, launched in 1966 and still in production

By the 1960s, refinements in ballpoint pen production gradually ensured its dominance over the fountain pen for casual use.[37] Although cartridge-filler fountain pens are still in common use in France, Italy, Germany, Austria, India, and the United Kingdom, and are widely used by young students in most private schools in England, at least one private school in Scotland,[38] and public elementary schools in Germany,[39] a few modern manufacturers (especially Conway Stewart, Montblanc, Graf von Faber-Castell, and Visconti) now depict the fountain pen as a collectible item or a status symbol, rather than an everyday writing tool.[40] However, fountain pens continue to have a growing following among many who view them as superior writing instruments due to their relative smoothness and versatility. Retailers continue to sell fountain pens and inks for casual and calligraphic use. Recently, fountain pens have made a resurgence, with many manufacturers of fountain pens saying sales are climbing. This has led to a new wave of casual use fountain pens and custom ink manufacturers, who utilize online stores to easily sell fountain pens to a wider audience.[41]

Feed

The feed of a fountain pen is the component that connects the nib of the pen with its ink reservoir.[42] It not only allows the ink to flow to the nib (in what is often described as a "controlled leak") but also regulates the amount of air flowing backwards up to the reservoir to replace this lost ink.[43]

The feed uses of a series of narrow channels or "fissures" that run down its lower edge. As ink flows down these fissures, air is simultaneously allowed to flow upwards into the reservoir in an even exchange of volumes. The feed allows ink to flow when the pen is being put to paper but ensures ink does not flow when the pen is not in use. The feed makes use of capillary action; this is noticeable when a pen is refilled with a brightly coloured ink. The ink is taken up and into the feed by way of capillary action (and is often visible in clear demonstrator pens), but is not dispensed onto the paper until the nib makes contact.[42]

How the feed is shaped may determine the wetness and flow of a particular pen. For this reason, feed material alone and its surface roughness may have a significant effect on the way two pens of the same nib size write.[44][45]

Pen feeds are crucial to preventing ink from dripping or leaking. Feeds often feature finned structures intended for buffering fountain pen ink. Buffering is the capacity to catch and temporarily hold an overflow of ink, caused by conditions other than writing. When a fountain pen nib receives such an overflow it will result in ink blobbing or dripping also known as burping. A pen with a misconfigured feed might fail to deposit any ink whatsoever.[46]

Fiber feeds

Some fountains pens use a fiber wick underneath the nib. They often have a plastic part that looks like a feed that is only used to hold the fiber wick in place and does not assist with ink flow. The mechanism of action is like a felt pen, just with a fountain pen nib on top of it. The fiber feeds offer plenty of ink flow and can stay wet for extended periods. Cleaning fiber feed pens can require longer soaking in water.

Nibs

Detail of a Visconti stainless steel nib and feed with a finned ink buffering structure at its rear half
Tip of a fountain pen nib

According to Mathur et al., "the modern fountain pen nib may be traced back to the original gold nib which had a tiny fragment of ruby attached to form the wear-point."[47] Following the discovery of the platinum group of metals which include ruthenium, osmium, and iridium, "a small quantity of iridium was isolated and used on the iridium-tipped gold dip pen nibs of the 1830s."[47] Today, nibs are usually made of stainless steel or gold alloys, with the most popular gold content being 14 carat (58⅓%) and 18 carat (75%).[48] Titanium is a less common metal used for making nibs. Gold is considered the optimum metal for its flexibility and its resistance to corrosion, although gold's corrosion resistance is less of an issue than in the past because of better stainless steel alloys and less corrosive inks.[48] Visconti used to use nibs made out of palladium, as it acts like gold, but have now changed to using gold for most of their nibs as it is easier to source.

Nib plating

Further gold plating provides favorable wettability, which is the ability of a solid surface to reduce the surface tension of a liquid in contact with it such that it spreads over the surface.[49]

Nib tipping

The Pilot Parallel, an example of a type of an italic nib used in fountain pens, often used to create art and calligraphy. This pen has two flat plates that meet in the center in place of a traditional nib.

Gold and most steel and titanium nibs are tipped with a hard, wear-resistant alloy that typically includes metals from the platinum group. These metals share qualities of extreme hardness and corrosion resistance. The tipping material is often called "iridium", but there are few, if any, nib or pen manufacturers that used tipping alloys containing iridium metal since the mid-1950s.[50] The metals osmium, rhenium, ruthenium, and tungsten are used instead, generally as an alloy, with a little bit of osmium, rhenium, ruthenium, and tungsten in a mix of other materials, produced as tiny pellets which are soldered or welded onto a nib tip prior to cutting the nib slit and grinding the tip into its final shape.[51] Untipped steel and titanium points will wear more rapidly due to abrasion by the paper.[48]

Capillary action

The nib usually has a tapering or parallel slit cut down its centre, to convey the ink down the nib by capillary action, as well as a "breather hole" of varying shape.[52] The breather hole has no actual function regarding controlling the ink or air flow. Its main function is to provide an endpoint to the nib slit and forestall inaccuracies during nib slit cutting. Adding distance between the breather hole and the nib tip adds elasticity or flexibility to the nib. The breather hole also acts as a stress relieving point, preventing the nib from cracking longitudinally from the end of the slit as a result of repeated flexing during use.[42]

The whole nib narrows to a point where the ink is transferred to the paper. Broad calligraphy pens may have several slits in the nib to increase ink flow and help distribute it evenly across the broad point. Nibs divided into three 'tines' are commonly known as music nibs. This is because their line, which can be varied from broad to fine, is suited for writing musical scores.[53]

Types of nibs

Although the most common nibs end in a round point of various sizes (extra fine, fine, medium, broad), various other nib shapes are available. Examples of this are double broad, music, oblique, reverse oblique, stub, italic, and 360-degree nibs.[52]

Broader nibs are used for less precise emphasis, with the benefit of a greater level of ink shading, a property wherein ink pools in parts of a stroke to cause variations in color or sheen where dyes in ink crystallize on a page instead of absorbing into the paper, which leads to a different color being seen on less absorbent paper due to thin film interference. Finer nibs (e.g. extra fine and fine) may be used for intricate corrections and alterations, at the expense of shading and sheen. Oblique, reverse oblique, stub, and italic nibs may be used for calligraphic purposes or for general handwritten compositions. The line width of a particular nib may vary based on its country of origin; Japanese nibs are often thinner in general.[54]

Nib flexibility

Flexibility is given to nibs in several ways. First, the thickness of the nib metal changes flex. When the nib alloy has been pressed thick it will result in a hard nib, while thinly pressed nibs are more flexible. Nibs can be pressed so that they are thinner at the tip and thicker at the feed to mitigate stiffness or to give a more controlled flex. Second, the curve of the nib determines in part how stiff the nib will be.[55]

Nibs pressed into more deeply convex curves, or into three or five faceted curves, will be stiffer than flatter nibs. Third, the "breather hole" size, shape, and position alter the stiffness. Heart-shaped holes will improve flex as they widen, while round, small holes stiffen the pen. Fourth, the length of the tines determines how far they can spread under pressure, shorter tines make a stiffer nib. Fifth, the alloy used can affect stiffness: as mentioned before, gold is considered superior for its flex compared to steel. Moreover, purer gold (18k and 21k) is softer than most lower gold concentration (14k) alloys.[48]

Mabie Todd Swan flexible 14k nib

Fountain pens dating from the first half of the 20th century are more likely to have flexible nibs, suited to the favored handwriting styles of the period (e.g. Copperplate script and Spencerian script). By the 1940s, writing preferences had shifted towards stiffer nibs that could withstand the greater pressure required for writing through carbon paper to create duplicate documents.[56]

Furthermore, competition between the major pen brands such as Parker and Waterman, and the introduction of lifetime guarantees, meant that flexible nibs could no longer be supported profitably. In countries where this rivalry was not present to the same degree, such as the UK and Germany, flexible nibs are more common.[57]

Nowadays, stiff nibs are the norm as people exchange between fountain pens and other writing modes. These more closely emulate the ballpoint pens most modern writers are experienced with. Despite being rigid and firm, the idea that steel nibs write "horribly" is a misconception.[58] More flexible nibs can be easily damaged if excessive pressure is applied to them. Ideally, a fountain pen's nib glides across the paper using the ink as a lubricant, and writing requires no pressure.

Good quality nibs that have been used appropriately are long lasting, often lasting longer than the lifetime of the original owner. Many vintage pens with decades-old nibs can still be used today.[59]

Hooded nib of a Hero pen
The Integral Nib of a Parker 50 (Falcon)

Different nib styles

Other styles of fountain pen nibs include hooded (e.g. Parker 51, Parker 61,[60] 2007 Parker 100,[61] Lamy 2000,[62] and Hero 329),[63][64] inlaid (e.g. Sheaffer Targa or Sheaffer P.F.M) or integral Nib (Parker T-1, Falcon, and Pilot Myu 701), which may also be ground to have different writing characteristics.[65]

Users are often cautioned not to lend or borrow fountain pens as the nib "wears in" at an angle unique to each individual person.[57] A different user is likely to find that a worn-in nib does not write satisfactorily in their hand and, furthermore, creates a second wear surface, ruining the nib for the original user. This, however, is not a point of concern in pens with modern, durable tipping material, as these pens take many years to develop any significant wear.[57]

Filling mechanisms

Left to Right: Gama Supreme eyedropper, Jinhao 159, and X750 using international standard converters or ink cartridges and Lamy Studio stainless and Nexx M using proprietary Lamy converters or ink cartridges
A squeeze filler by Hero

Eyedropper filler

The reservoirs of the earliest fountain pens were mostly filled by eyedropper. This was a cumbersome and potentially messy process, which led to the commercial development of alternative methods that quickly dominated the industry.[17] However, newer, more convenient filling mechanisms have never entirely displaced "eyedropper-filling" pens in the marketplace, and they remain widely manufactured today. For some the simplicity of the mechanism, coupled with the large volume of ink it can encapsulate, compensates for the inconvenience of ink transfer.[17]

After the eyedropper-filler era came the first generation of mass-produced self-fillers, almost all using a rubber sac to hold the ink. The sac was compressed and then released by various mechanisms to fill the pen.[66]

Self-filling designs

The Conklin crescent filler, introduced c. 1901, was one of the first mass-produced self-filling pen designs. The crescent filling system employs an arch-shaped crescent attached to a rigid metal pressure bar, with the crescent portion protruding from the pen through a slot and the pressure bar inside the barrel. A second component, a C-shaped hard rubber ring, is located between the crescent and the barrel.[67]

Ordinarily, the ring blocks the crescent from pushing down. To fill the pen, one simply turns the ring around the barrel until the crescent matches up to the hole in the ring, allowing one to push down the crescent and squeeze the internal sac.[68]

Several other filling mechanisms were introduced to compete, such as the coin-filler (where a coin or 'medallion' was supplied along with the pen), match-filler (using a matchstick) and a 'blow-filler' which unsurprisingly required the pen owner to blow into the barrel to depress the internal sac.[1]

Piston filling innovation

In 1907, Walter A. Sheaffer patented the Lever filler, using a hinged lever set into the pen barrel which pressed down onto a bar which in turn compressed the rubber sac inside, creating a vacuum to force ink into the pen. Introduced in 1912, this innovation was rapidly imitated by the other major pen makers. Parker introduced the button filler, which had a button hidden beneath a blind cap on the end of the barrel; when pressed, it acted on a pressure bar inside to depress the ink sac.[20]

Following the crescent filler came a series of systems of increasing complexity, reaching their apogee in the Sheaffer Snorkel, introduced in 1952. The Sheaffer "Snorkel" system filled the ink sac through a retractable tube above and behind the pen point. This eliminated the need to dunk the point in ink, and the subsequent need to wipe it.[69] With the advent of the modern plastic ink cartridge in the early 1950s, though, most of these systems were phased out in favour of convenience (but reduced capacity).

Screw-mechanism piston-fillers were made as early as the 1820s, but the mechanism's modern popularity begins with the original Pelikan of 1929, based upon a patent that was initially licensed to a Croatian company Moster-Penkala by inventor Theodore Kovacs.[70] The basic idea is simple: turn a knob at the end of the pen, and a screw mechanism draws a piston up the barrel, sucking in ink. Thus they were easier to fill, and pens with this mechanism remain very popular today. Some of the earlier models had to dedicate as much as half of the pen length to the mechanism.[71] The advent of telescoping pistons has improved this; the Touchdown Filler was introduced by Sheaffer in 1949. It was advertised as an "Exclusive Pneumatic Down-stroke Filler."[72]

To fill it, a knob at the end of the barrel is unscrewed and the attached plunger is drawn out to its full length. The nib is immersed in ink, the plunger is pushed in, compressing and then releasing the ink sac by means of air pressure. The nib is kept in the ink for approximately 10 seconds to allow the reservoir to fill. This mechanism is very closely modeled after a similar pneumatic filler introduced by Chilton over a decade earlier.[73]

Modern filling mechanisms

Schmidt K5 piston-style standard international size fountain pen converter, containing a user inserted 2.5 mm diameter Marine grade 316 stainless steel bearing ball

A capillary filling system was introduced by Parker in the Parker 61 in 1956.[74] There were no moving parts: the ink reservoir within the barrel was open at the upper end, but contained a tightly rolled length of slotted, flexible plastic. To fill, the barrel was unscrewed, the exposed open end of the reservoir was placed in ink and the interstices of the plastic sheet and slots initiated capillary action, drawing up and retaining the ink. The outside of the reservoir was coated with Teflon, a repellent compound that released excess ink as it was withdrawn. Ink was transferred through a further capillary tube to the nib. No method of flushing the device was offered, and because of problems from clogging with dried and hardened ink, production was eventually stopped.[75]

Around the year 2000, Pelikan introduced a filling system involving a valve in the blind end of the pen, which mates with a specially designed ink bottle.[76] Thus docked, ink is then squeezed into the pen barrel (which, lacking any mechanism other than the valve itself, has nearly the capacity of an eyedropper-fill pen of the same size). This system had been implemented only in their "Level" line, which was discontinued in 2006.[76]

Most pens today use either a piston filler, squeeze-bar filler or cartridge.[1] Many pens are also compatible with a converter, which has the same fitting as the pen's cartridge and has a filling mechanism and a reservoir attached to it.[1] This enables a pen to fill either from cartridges or from a bottle of ink. The most common type of converters are piston-style, but many other varieties may be found today. Piston-style converters generally have a transparent round tubular ink reservoir. Fountain pen inks feature differing surface tensions that can cause an ink to adhere or "stick" against the inside of the reservoir. Common solutions for this problem are adding a small (rust-proof) ink agitating object like a 316L or 904L stainless steel or zirconium dioxide bearing ball, spring or hollow tube in the tubular reservoir to mechanically promote free movement of the contained ink and ink/air exchange during writing. Adding a very small amount of surfactant such as Triton X-100 used in Kodak Photo-Flo 200 wetting agent to the ink will chemically promote free movement of the contained ink and ink/air exchange during writing. However, ink might react adversely to adding a surfactant.

Vacuum fillers, such as those used by Pilot in the Custom 823, utilize air pressure to fill the ink chamber. In this case, while the nib is submerged in ink, a plunger is pushed down the empty chamber to create a vacuum in the space behind it. The end of the chamber has a section wider than the rest, and when the plunger passes this point, the difference in air pressure in the area behind the plunger and the area ahead of it is suddenly evened out and ink rushes in behind the plunger to fill the chamber.

Cartridges

A patent for an ink cartridge system for fountain pens was filed in 1890. In the early 20th century, cartridges were made from glass and thin copper tubing. However, the concept only became successful and popular after the introduction of moulded plastic cartridges, firstly by Waterman in 1953.[77] Modern plastic cartridges can contain small ridges on the inside to promote free movement of the contained ink and ink/air exchange during writing. Often cartridges are closed with a small ball that gets pressed into the cartridge during insertion into the pen. This ball also aids free movement of the contained ink.

Standard international

Dimensions of short International Ink Cartridge

Most European fountain pen brands (for example Conway Stewart, Caran d'Ache, Faber-Castell, Michel Perchin, S.T. Dupont, Montegrappa, Stipula, Pelikan, Montblanc, Europen, Monteverde, Sigma, Delta, Italix, and Rotring) and some pen brands of other continents (for example Acura, Bexley, Retro51, Tombow, and Platinum (with adaptor)) use so called "international cartridges" (AKA "European cartridges" or "standard cartridges" or "universal cartridges"), in short (38 mm in length, about 0.75 ml of capacity) or long (72 mm, 1.50 ml) sizes, or both. It is to some extent a standard, so the international cartridges of any manufacturer can be used in most fountain pens that accept international cartridges.[78]

Also, converters that are meant to replace international cartridges can be used in most fountain pens that accept international cartridges. Some very compact fountain pens (for example Waterman Ici et La and Monteverde Diva) accept only short international cartridges.[79] Converters can not be used in them (except for so-called mini-converters by Monteverde). Some pens (such as the modern Waterman models) have intentional fittings which prevent the usage of short cartridges. Such pens can only take a proprietary cartridge from the same manufacturer, in this case the long Waterman cartridges.[80]

Proprietary offerings

Proprietary cartridges (left to right): Pilot, Parker, Lamy, short standard international (made by Kaweco)

Many fountain pen manufacturers have developed their own proprietary cartridges, for example Parker, Lamy, Sheaffer, Cross, Sailor, Platinum, Platignum, Waterman, and Namiki. Fountain pens from Aurora, Hero, Duke, and Uranus accept the same cartridges and converters that Parker uses and vice versa (Lamy cartridges, though not officially, are known to interchange with Parker cartridges also). Cartridges of Aurora are slightly different from cartridges by Parker.[81]

Corresponding converters to be used instead of such proprietary cartridges are usually made by the same company that made the fountain pen itself. Some very compact fountain pens accept only proprietary cartridges made by the same company that made that pen, such as Sheaffer Agio Compact and Sheaffer Prelude Compact. It is not possible to use a converter in them at all. In such pens the only practical way to use another brand of ink is to fill empty cartridges with bottled ink using a syringe.[81]

Standard international cartridges are closed by a small ball, held inside the ink exit hole by glue or by a very thin layer of plastic. When the cartridge is pressed into the pen, a small pin pushes in the ball, which falls inside the cartridge. The Parker and Lamy cartridges do not have such a ball. They are closed by a piece of plastic, which is broken by a sharp pin when inserted in the pen.[78]

Concerns and alternatives

Pen manufacturers using a proprietary cartridge (which in almost all cases are the more expensive ones like the ones mentioned above) tend to discourage the use of cheaper[82] internationally standardised short/long cartridges or adaptations thereof due to their variance in ink quality in the cartridges which may not offer as much performance, or be of lesser quality than the manufacturer of the pen's ink that has been designed specifically for the pen. Cheaper ink, owing to potential additive deficits such as glycerides or uneven pigmentation, may also skip or produce uneven colour on the page and "feather" (spread out of the originally written line) more on thinner grades of paper (e.g. 75 gsm).[82]

While cartridges are more convenient to refill than bottle filling, converter and bottle filling systems are still sold. Non-cartridge filling systems tend to be slightly more economical in the long run since ink is generally less expensive in bottles than in cartridges. Advocates of bottle-based filling systems also cite less waste of plastic for the environment, a wider selection of inks, easier cleaning of pens (as drawing the ink in through the nib helps dissolve old ink), and the ability to check and refill inks at any time.[83]

Inks

A bottle of green ink

Inks intended for use with fountain pens are water-based. These inks are commonly available in bottles. Plastic cartridges came into use in the 1960s, but bottled inks are still the mainstay for most fountain pen enthusiasts. Bottled inks usually cost less than an equivalent amount in cartridges and afford a wider variety of colours and properties.[84]

Fountain pens are not as tightly coupled with their inks as ballpoints or gel pens are, yet some care must be taken when selecting their inks. Contemporary fountain pen inks are almost exclusively dye-based because pigment particles usually clog the narrow passages.[84][83]

Traditional iron gall inks intended for dip pens are not suitable for fountain pens as they will corrode the pen (a phenomenon known as flash corrosion) and destroy the functionality of the fountain pen.[82] Instead, modern surrogate iron gall formulas are offered for fountain pens. These modern iron gall inks contain a small amount of ferro gallic compounds, but are gentler for the inside of a fountain pen, but can still be corrosive if left in the pen for a long period.[82] To avoid corrosion on delicate metal parts and ink clogging a more thorough than usual cleaning regime – which requires the ink to be flushed out regularly with water – is sometimes advised by manufacturers or resellers.[85]

Some pigmented inks do exist for fountain pens, such as "Carbon Black" made by the brand Platinum, but these are uncommon. Normal India ink cannot be used in fountain pens because it contains shellac as a binder which would very quickly clog such pens.[86]

Inks ideally should be fairly free-flowing, free of sediment, and non-corrosive, though this generally excludes permanence and prevents large-scale commercial use of some colored dyes. Proper care and selection of ink will prevent most problems.[82]

Today

A 1970s model metal and plastic fountain pen
The Pilot Varsity, an inexpensive disposable fountain pen
A modern celluloid fountain pen fitted with a vintage nib

While no longer the primary writing instrument in modern times, fountain pens are used for important official works such as signing valuable documents.[87] Today, fountain pens are often treated as luxury goods and sometimes as status symbols. Fountain pens may serve as an everyday writing instrument, much like the common ballpoint pen.[57] Good quality steel and gold pens are available inexpensively today, particularly in Europe and China, and there are "disposable" fountain pens such as the Pilot Varsity. In France and Germany, in particular, the use of fountain pens is widespread, since in many European countries children still begin to learn writing with this kind of writing device. To avoid mistakes, special ink can be used that can be made invisible by applying an ink eraser.

Fountain pens can serve various artistic purposes such as expressive penmanship and calligraphy, pen and ink artwork, and professional art and design. Many users also favor the perceived elegance, personalization, and sentimentality associated with fountain pens,[88] which computers and ballpoint pens seem to lack,[89] and often state that once they start using fountain pens, ballpoints become awkward to use due to the extra motor effort needed and lack of expressiveness.

For ergonomics, fountain pens may relieve physiological stress from writing; alternatives such as the ballpoint pen can induce more pain and damage to those with arthritis. Some also believe they could improve academic performance.[90] In some countries, fountain pens are usual in lower school grades, believed to teach children better control over writing as many common mistakes of people not used to handwriting (like too much pressure or incorrect hold) feel unnatural or are almost impossible when using traditional pen tips.[91]

A modern fountain pen, writing in cursive script

Some fountain pens are treated as collectables. Ornate pens may be made of precious metals and jewels with cloisonné designs. Some are inlaid with lacquer designs in a process known as maki-e.[92] Avid communities of pen enthusiasts collect and use antique and modern pens and also collect and exchange information about old and modern inks, ink bottles, and inkwells. Collectors may decide to use the antiques in addition to showcasing them in closed spaces such as glass displays.[93]

News outlets report that rather than declining, fountain pen sales have been steadily rising over the last decade.[94] There is a clear resurgence in the appeal and culture of the fountain pen, whether for purposes of collection, enjoyment or as a "lifestyle item".[95] Many agree that the "personal touch" of a fountain pen has led to such a resurgence with modern consumers looking for an alternative in a world of digital products and services.[96]

Amazon reported "sales so far this year [2012] have doubled compared with the same period in 2011. They are four times higher than 2010."[94] The popularity of fountain pens continues to show growth. The market-research firm Euromonitor reported that fountain pen retail sales were up 2.1% in 2016 from a year earlier, reaching $1.046 billion.[97]

See also

Notes and references

  1. 1 2 3 4 Binder, Richard. "Filling Systems: Overview of How They Work and How to Fill Them". Richard Binder's Pens. Archived from the original on 28 July 2016. Retrieved 26 July 2016.
  2. Bosworth, C. E. (1981). "A Mediaeval Islamic Prototype of the Fountain Pen?". Journal of Semitic Studies. 26 (1): 229–234. doi:10.1093/jss/26.2.229. ...not more than a few days passed before the craftsman, to whom the construction of this contrivance had been described, brought in the pen, fashioned from gold. He then filled it with ink and wrote with it, and it really did write. The pen released a little more ink than was necessary. Hence al-Mu'izz ordered that it should be adjusted slightly, and he did this. He brought forward the pen and behold, it turned out to be a pen which can be turned upside down in the hand and tipped from side to side, and no trace of ink appears from it. When a secretary takes up the pen and writes with it, he is able to write in the most elegant script that could possibly be desired; then, when he lifts the pen off the sheet of writing material, it holds in the ink. I observed that it was a wonderful piece of work, the like of which I had never imagined I would ever see.
  3. "La penna di Leonardo alla sala regia". Tusciaweb.eu (in Italian). September 7, 2011. Archived from the original on 2013-08-01. Retrieved 2016-11-09.
  4. Schwenter, Daniel, Deliciae physico-mathematicae … (Nürnberg, (Germany): Jeremias Dümler, 1636), vol. 1, pp. 519–520 "Die III Auffgab. Ein schön Secret, eine Feder zu zurichten, welche Dinten hält, und so viel lässet als man bedürfftig." (The third exercise. A nice secret: to prepare a pen which holds ink and lets [flow] as much as one requires. [with illustration])
  5. Pepys, Samuel (August 1663). Diary entries from August 1663 (Pepys' Diary). Samuel Pepys. Archived from the original on 19 October 2012. Retrieved 27 July 2016.
  6. 1 2 Richardson, Hester Dorsey (1913). "Chapter XLVII: The Fountain Pen in the Time of Charles II". Side-lights on Maryland History, with Sketches of Early Maryland Families. Baltimore, Md.: Williams & Wilkins Co. pp. 216–17. ISBN 0-8063-1468-0.
  7. Matthew Henry, Commentary on the Whole Bible, Zechariah iv. 2 (1710), describing a type of self-replenishing oil lamp: "Without any further Care they [i.e. the lamps] received Oil as fast as they wasted it, ('as in those which we call Fountain Inkhorns, or Fountain Pens')".
  8. "Who Invented The Fountain Pen?". Vintage Pens. Archived from the original on 11 January 2019. Retrieved 10 January 2019.
  9. 1 2 "Who Invented The Fountain Pen?". Best Fountain Pen. 2015-01-05. Archived from the original on 2016-10-07. Retrieved 27 July 2016.
  10. "Perry and Co". Grace's Guide. Archived from the original on 3 July 2016. Retrieved 27 July 2016.
  11. "Birmingham Heritage". www.birminghamheritage.org.uk. Archived from the original on 10 February 2021. Retrieved 27 July 2016.
  12. "The Manufacture of Steel Pens in Birmingham". The Illustrated London News. 18 (471). 22 February 1851.
  13. The Times (London, England), 15 September 1885, p. 6: Obituary
  14. "Stylographic Pens". Vintage Pens. Archived from the original on 12 August 2016. Retrieved 27 July 2016.
  15. Scientific American, "Fountain Pens". Munn & Company. 1878-08-10. p. 80.
  16. Binder, Richard. "Significant Pens of the Twentieth Century". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 27 July 2016.
  17. 1 2 3 Binder, Richard. "Filling System Histories: Here's Mud in Your Eye(dropper)". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 26 July 2016.
  18. "Filling Instructions: Twist-Fillers". Vintage Pens. Archived from the original on 27 July 2016. Retrieved 27 July 2016.
  19. "Crescent Filler". His Nibs. Archived from the original on 10 August 2016. Retrieved 27 July 2016.
  20. 1 2 Binder, Richard. "Filling System Histories: Lever Look Back". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 26 July 2016.
  21. Binder, Richard. "Fillers: Wring It Out!". Richard Binder's Pens. Archived from the original on 29 September 2016. Retrieved 27 July 2016.
  22. "Safety Pens". Vintage Pens. Archived from the original on 2016-08-12. Retrieved 2016-07-26.
  23. "Middle-Joint, End-Joint & 'Jointless' Eyedroppers". www.vintagepens.com. Archived from the original on 7 March 2017. Retrieved 11 March 2017.
  24. "Waterman Safeties". Vintage Pens. Archived from the original on 2016-08-12. Retrieved 2016-07-26.
  25. Binder, Richard. "Design Features: Safety Pens". Richard Binder's Pens. Archived from the original on 12 August 2016. Retrieved 27 July 2016.
  26. "The Mabie Todd Swan Safety Screw Cap Eyedropper Filler". Good Writers' Pens. 7 May 2011. Archived from the original on 16 August 2016. Retrieved 27 July 2016.
  27. Propas, Rick. "The PENguin – Pelikan, Parker and Other High Quality Fountain Pens". The PENguin. Archived from the original on 2016-07-26. Retrieved 27 July 2016.
  28. "1929–1950 – The piston filling mechanism – Pelikan". Pelikan. Archived from the original on 28 August 2016. Retrieved 26 July 2016.
  29. Nishimura, David. "What is celluloid, and why is it not the same as cellulose nitrate/nitrocellulose?". Vintage Pens. Archived from the original on 12 August 2016. Retrieved 26 July 2016.
  30. "Parker Pens Penography: DUOFOLD". Parker Pens. Archived from the original on 7 August 2016. Retrieved 27 July 2016.
  31. Binder, Richard. "The Parker Vacumatic". Richard Binder's Pens. Archived from the original on 22 July 2016. Retrieved 27 July 2016.
  32. Binder, Richard. "Sheaffer's Balance". Richard Binder's Pens. Archived from the original on 11 July 2016. Retrieved 27 July 2016.
  33. "Dating a Pelikan". The Pelikan's Perch. 25 August 2014. Archived from the original on 18 August 2016. Retrieved 27 July 2016.
  34. "History of the pen". Rick Conner. Archived from the original on 3 May 2016. Retrieved 27 July 2016.
  35. "Sheaffer Snorkel 1952–1959". Pen Hero. Archived from the original on 9 August 2016. Retrieved 27 July 2016.
  36. "J Series Pens". Esterbrook. Archived from the original on 29 July 2016. Retrieved 27 July 2016.
  37. "Pens – Overview". Collectors Weekly. Archived from the original on 27 July 2016. Retrieved 27 July 2016.
  38. "Fountain pens boost 'self-esteem'". BBC News. November 13, 2006. Archived from the original on February 18, 2007. Retrieved November 25, 2006.
  39. Pidd, Helen (29 June 2011). "German teachers campaign to simplify handwriting in schools". Guardian. Archived from the original on 30 November 2020. Retrieved 31 July 2021.
  40. "When Buying Fountain Pens, Splurging (a Little) Is Totally Worth It". Wired. Condé Nast. September 2014. Archived from the original on 20 July 2016. Retrieved 27 July 2016.
  41. Brocklehurst, Steven (2012-05-22). "Why are fountain pen sales rising?". BBC News. Archived from the original on 2017-08-24. Retrieved 2017-08-24.
  42. 1 2 3 "How Fountain Pens Work". Explain That Stuff. 21 January 2011. Archived from the original on 25 April 2021. Retrieved 27 July 2016.
  43. Binder, Richard. "Feeds: Revolution, Evolution, and Devolution". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 26 July 2016.
  44. Gilmour, Jono (25 August 2012). "Fountain Pen Guide Series, Session 1: Nibs, Feeds, and How They Come Together". Pentorium. Archived from the original on 2 August 2016. Retrieved 26 July 2016.
  45. "Feeds made of Plastic". Fountain Pen Design. 26 July 2016. Archived from the original on 31 July 2020. Retrieved 7 November 2016.
  46. Conner, Rick. "Construction of a fountain pen". Rick Conner. Archived from the original on 12 August 2016. Retrieved 26 July 2016.
  47. 1 2 Mathur, P.; Mathur, K.; Mathur, S. (2014-03-06). Developments and Changes in Science Based Technologies. Partridge. ISBN 978-1-4828-1398-2. Retrieved 27 July 2016.
  48. 1 2 3 4 Binder, Richard. "To the Point: Nib Materials". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 26 July 2016.
  49. "Steel vs. Gold Fountain Pen Nibs". Pen Heaven. Archived from the original on 24 November 2020. Retrieved 26 July 2016.
  50. "Where's the Iridium?". The Nibster. Archived from the original on 1 August 2016. Retrieved 26 July 2016.
  51. Mottishaw, J. (1999). "How can we talk about Iridium?". The PENnant. XIII (2). Archived from the original on 2016-12-05. Retrieved 2016-12-05.
  52. 1 2 Binder, Richard. "Nibs I: The Basics". Richard Binder's Pens. Archived from the original on 18 July 2016. Retrieved 26 July 2016.
  53. Binder, Richard. "To the Point: Making Music with a Pen". Richard Binder's Pens. Archived from the original on 14 May 2016. Retrieved 26 July 2016.
  54. Binder, Richard. "Nibs II: Beyond the Basics with Specialty Nibs". Richard Binder's Pens. Archived from the original on 28 April 2021. Retrieved 26 July 2016.
  55. "Grading Flex Nibs". VintagePen. Archived from the original on 27 April 2021. Retrieved 26 July 2016.
  56. Binder, Richard. "Rethinking The Value of Steel Nibs". Richard Binder's Pens. Archived from the original on 26 April 2021. Retrieved 27 July 2016.
  57. 1 2 3 4 "Fountain Pen Guide". Gentleman's Gazette. 8 May 2015. Archived from the original on 12 November 2020. Retrieved 27 July 2016.
  58. Binder, Richard. "To the Point: Steal the Steel". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 26 July 2016.
  59. "How to Collect and Buy Vintage Fountain Pens". The Art of Manliness. 19 November 2015. Archived from the original on 12 March 2018. Retrieved 27 July 2016.
  60. "Parker 61". ParkerPens.net. Archived from the original on 30 July 2021. Retrieved 31 July 2021.
  61. "Parker 100". ParkerPens.net. Archived from the original on 27 October 2021. Retrieved 31 July 2021.
  62. "Lamy 2000 Fountain Pen". Unsharpen.com. Archived from the original on 31 July 2021. Retrieved 31 July 2021.
  63. Binder, Richard. "To the Point: Nibz 'n the Hood". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 26 July 2016.
  64. "What is the Purpose of a Hooded Nib?". 11 October 2017. Archived from the original on 25 January 2021. Retrieved 27 February 2021.
  65. Binder, Richard. "Design Features: Integral Nibs". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 27 July 2016.
  66. Binder, Richard. "Filling System Histories: Capillary Pens – the Perfect Filler?". Richard Binder's Pens. Archived from the original on 7 October 2016. Retrieved 26 July 2016.
  67. "Conklin Crescent Fillers". Vintage Pens. Archived from the original on 12 August 2016. Retrieved 26 July 2016.
  68. "Conklin – Crescent Filler Collection". Conklin Pens. Archived from the original on 15 July 2016. Retrieved 26 July 2016.
  69. "Sheaffer Snorkel 1952–1959". Pen Hero. Archived from the original on 9 August 2016. Retrieved 26 July 2016.
  70. "The Patent That Launched A Fountain Pen Empire". thepelikanperch. 2 October 2020. Retrieved 9 September 2023.
  71. "1929–1950 – The piston filling mechanism". Pelikan. Archived from the original on 28 August 2016. Retrieved 27 July 2016.
  72. "PenHero.com – PenGallery – Sheaffer Touchdown Filling System". Pen Hero. Archived from the original on 13 August 2016. Retrieved 26 July 2016.
  73. Binder, Richard. "How to Restore the Touchdown Filling System". Richard Binder's Pens. Archived from the original on 7 October 2016. Retrieved 26 July 2016.
  74. Match, Richard (September 1956). "Things you never knew about your pen". Popular Science Monthly. New York. 169 (3): 278. it drinks its fill automatically, by a reverse application of our old friend capillary action
  75. Conner, Rick (2005-01-20). "Parker 61". PRick Conner. Archived from the original on 2008-10-11. Retrieved 2008-08-08.
  76. 1 2 Binder, Richard. "Design Features: What Were They Thinking?". Richard Binder's Pens. Archived from the original on 20 August 2016. Retrieved 26 July 2016.
  77. Nishimura, David. "Early Cartridge Pens". Vintage Pens. Retrieved 20 May 2014.
  78. 1 2 Goulet, Brian (30 June 2016). "Who Invented Standard International Cartridges? – Q&A Slices". YouTube (Goulet Pens). Goulet Pens. Archived from the original on 2021-12-11. Retrieved 27 July 2016.
  79. "Fountain Pen Converters". Nibs. Archived from the original on 15 July 2016. Retrieved 27 July 2016.
  80. "Which Ink Cartridges Can Be Used With Which Fountain Pens?". Nibs. Archived from the original on 28 July 2016. Retrieved 27 July 2016.
  81. 1 2 "Fountain Pen Ink Cartridges". Nibs. Archived from the original on 24 July 2016. Retrieved 27 July 2016.
  82. 1 2 3 4 5 Binder, Richard. "Inks: The Good, the Bad, and the Ugly". Richard Binder's Pens. Archived from the original on 27 July 2016. Retrieved 26 July 2016.
  83. 1 2 "Cartridge vs. converter". Goldspot Pens. 2010. Archived from the original on 2016-08-17. Retrieved 2016-07-27.
  84. 1 2 "Fountain pen inks aren't all the same". Penfountain. 2010. Archived from the original on 2011-02-27. Retrieved 2011-02-20.
  85. "Pen maintenance". Nibs. Archived from the original on 2016-08-08. Retrieved 2016-07-27.
  86. Covington, Michael A. "A Few Notes About Fountain Pens". A Few Notes About Fountain Pens. Archived from the original on 2010-11-22. Retrieved 2011-02-20.
  87. "Seal the Deal: The Mightest Fountain Pens". Forbes. 17 June 2015. Archived from the original on 4 May 2018. Retrieved 28 August 2017.
  88. Yoko Hani (24 December 2006). "Find out why a fountain pen 'personalizes' your prose". Japan Times. Archived from the original on 5 April 2018. Retrieved 5 April 2018. the key word I was left with was 'personal' – not only because a fountain pen will over time change to suit your writing style, but because – unlike a typewriter or a keyboard – it will reflect your moods and feelings in the actual form of your writing
  89. Yoko Hani (24 December 2006). "Find out why a fountain pen 'personalizes' your prose". Japan Times. Archived from the original on 5 April 2018. Retrieved 5 April 2018. the unique feature of fountain pens that differentiates them from workaday ballpoints – let alone pencils. Also, ballpoints are in their best condition when they are brand new, whereas fountain pens get better the more you use them, Toshifumi Iijima, another of the museum's staff explained.
  90. Mcginty, Stephen (November 13, 2006). "School brings back pens so pupils get to write stuff". Edinburgh: news.scotsman.com. Archived from the original on June 4, 2011. Retrieved December 11, 2006. The school believes that mastering stylish handwriting with a fountain pen raises academic performance and boosts self-esteem.
  91. "Goulet Pens Blog: The 7 Biggest Fountain Pen Mistakes". blog.gouletpens.com. 2016-02-23. Archived from the original on 2017-10-01. Retrieved 26 July 2016.
  92. "Penna Magazine – Namiki Maki-e Guide". Pen Magazine. Archived from the original on 30 October 2020. Retrieved 26 July 2016.
  93. Morrison, Lennox. "The fascination with fountain pens". BBC. Archived from the original on 14 September 2016. Retrieved 27 July 2016.
  94. 1 2 Brocklehurst, Steven (22 May 2012). "Why are fountain pen sales rising?". BBC News Magazine. Archived from the original on 16 June 2016. Retrieved 26 July 2016.
  95. Canham, Jacqui (20 July 2007). "Write way to earn a profit: Fountain pens are gaining popularity as". The Independent. Archived from the original on 19 August 2016. Retrieved 26 July 2016.
  96. Hall, James (23 May 2012). "Fountain pen sales double". The Telegraph. Archived from the original on 2022-01-12. Retrieved 26 July 2016.
  97. Patterson, Troy (6 February 2017). "Fountain pen sales are surging, despite flat luxury global sales". Chicago Tribune. Archived from the original on 5 May 2018. Retrieved 4 May 2018.

Bibliography

  • Finlay, Michael (1990). Western Writing Implements in the Age of the Quill Pen. Wheteral: Plains Books. ISBN 1-872477-00-3.
  • Fischler, George; Schneider, Stuart (1992). Fountain Pens and Pencils. New York: Shiffer Publishing. ISBN 0-88740-346-8.
  • Lambrou, Andreas (2003). Fountain Pens of the World. New York: Philip Wilson Publisher. ISBN 0-302-00668-0.
  • Park, JongJin (2013). Fountain Pens. Seoul: LBIG Media Publishing. ISBN 978-89-94819-09-9.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.