Distributed switching is an architecture in which multiple processor-controlled switching units are distributed. There is often a hierarchy of switching elements, with a centralized host switch and with remote switches located close to concentrations of users.

Use in telephony networks

Distributed switching is often used in telephone networks, though it is often called host-remote switching.

In rural areas, population centers tend to be too small for economical deployment of a full-featured dedicated telephone exchange, and distances between these centers make transmission costs relatively high. Normal telephone traffic patterns show that most calling is done between people in a community of interest, in this case a geographical one: the population center. Use of distributed switching allows for the majority of calls that are local to that population center to be switched there without needing to be transported to and from the host switch.

The host switch provides connectivity between the remote switches and to the larger network, and the host may also directly handle some rare and complex call types (conference calling, for example) that the remote itself is not equipped to handle. Host switches also perform OAM&P (Operation, Administration, Maintenance, and Provisioning) functions, including billing, for the entire cluster of the host and its remote switches.

A key capability of a remote switch is the ability to act in emergency standalone (ESA) mode, wherein local calls can still be placed even in the event that the connection between that remote and the host has been lost. In this mode, only local calling is available anyway, so the billing capability of the host switch is not required. ESA is increasingly available on digital loop carrier platforms as well as on purpose-built remote switches in order to improve the scope of their utility.

Use within telecommunications equipment platforms

Many data-centric telecommunications platforms such as routers and Ethernet switches utilize distributed switching on separate cards within an equipment chassis. Even when this is used, it is common to have a centralized switching fabric to interconnect the distributed switches. This architecture has become less common as backplane bus speeds and centralized switch fabric capacities have increased.

See also

References

  • From Host-Remote to Next-Generation - a white paper by MetaSwitch
  • Nortel RSC-S Overview
  • Lucent 5E-XC Standalone Remote Switches description
  • Public Domain This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.