EMD GP30
A GP30, GP35, and GP20 run light in the late 1980s on California's Cajon Pass.
Type and origin
Power typeDiesel-electric
Builder
Build dateJuly 1961 – November 1963
Total produced948
Specifications
Configuration:
  AARB-B
  UICBo′Bo′
Gauge4 ft 8+12 in (1,435 mm)
Wheel diameter40 in (1.02 m)
Length56 ft 2 in (17.12 m)
Width10 ft 4 in (3.15 m)
Height15 ft 11 in (4.85 m)
Loco weight245,000 lb (111,130 kg)
Fuel capacity1,700–2,600 US gal (6,400–9,800 L; 1,400–2,200 imp gal)
Lubricant cap.243 US gal (920 L; 202 imp gal)
Coolant cap.251 US gal (950 L; 209 imp gal)
Sandbox cap.18 cu ft (0.51 m3)
Prime moverEMD 16-567D3
RPM:
  RPM idle275
  Maximum RPM835
Engine typeTwo-stroke V16 diesel
AspirationTurbocharger
GeneratorEMD D22
Traction motors4 × EMD D57
Cylinders16
Cylinder size8+12 in × 10 in (216 mm × 254 mm)
Gear ratio
  • 62:15
  • 61:16
  • 60:17
Loco brakeSchedule 26L Straight air, optional: dynamic
Performance figures
Maximum speed71–83 mph (114–134 km/h)
Power output2,250 hp (1,680 kW)
Career
LocaleNorth America
[1]

The EMD GP30 is a 2,250 hp (1,680 kW) four-axle diesel-electric locomotive built by General Motors Electro-Motive Division of La Grange, Illinois between July 1961 and November 1963.[2] A total of 948 units were built for railroads in the United States and Canada (2 only), including 40 cabless B units for the Union Pacific Railroad.[3]

It was the first so-called "second generation" EMD diesel locomotive, and was produced in response to increased competition by a new entrant, General Electric's U25B, which was released roughly at the same time as the GP30. The GP30 is easily recognizable due to its high profile and stepped cab roof, unique among American locomotives.[3] A number are still in service today in original or rebuilt form.

History

Development

The GP30 was conceived out of the necessity of matching new competitor GE's U25B. The U25B offered 2,500 hp (1,860 kW) while EMD's GP20 and its 567D2 prime mover was only rated at 2,000 hp (1,490 kW). The U25B also featured a sealed, airtight long hood with a single inertial air intake for electrical cooling, with a pressurized cooling system which kept dust out of the engine and equipment area. Finally, the entire GE design was optimized for ease of access and maintenance. The U25B demonstrators were receiving much praise—and orders—from the railroads that tested them. Meanwhile, ALCO had been producing the 2,400 hp (1,800 kW) RS-27 since 1959, though it had not sold well.

EMD's engineering department pushed their DC traction system for an extra 250 hp (186 kW). The 2,250 hp (1,680 kW) wasn't quite equivalent to the GE and ALCO offerings, but EMD hoped the railroads' familiarity with EMD equipment would improve their chances. The locomotive in which the 16 cylinder, 567D3 would be fitted, was improved along the lines of the U25B; sealed long hood, central air intake, and engineered for easier maintenance access. The frame and trucks of the GP20 were carried across; the extra equipment for the centralized air system required more space behind the cab, and since the locomotive was not going to be lengthened, extra space was achieved vertically by raising the height of the locomotive, giving room for the central air system, turbocharger and electrical cabinet all behind the cab.[3] This extra height behind the cab meant that the body style used for previous GP units was not suitable.

Since EMD wanted the new locomotive to be visibly modern and updated, they turned to the GM Automotive Styling Center at Troy, Michigan for help. The automobile stylists created the GP30's trademark "hump" and cab roof profile. The hump-like bulge started at the front of the cab and enveloped the air intakes for the central air system and the dynamic brake blister.[3] Units ordered without dynamic brakes were the same shape, but lacked the intakes to cool the dynamic brake resistor grids.

A high short hood could be ordered, but only holdouts Norfolk and Western Railway and Southern Railway received such units. EMD originally planned to name the locomotive the GP22, but EMD's marketing department decided to leapfrog GE's numbering to make the new locomotive seem more advanced.[4] Marketing literature claimed 30 distinct improvements from the GP20 and that this was the reason for the number.[4]

Sales and in service

The GP30 successfully countered the GE threat and kept EMD in the dominant position in the North American diesel market. While losing a little power to the GE and ALCO competition, the solidity and reliability of the GP30—and the familiarity of railroad mechanical departments with EMD products—ultimately won many more orders for EMD. 948 were sold, in comparison to 476 U25Bs. In addition, the GP30 was only sold until the end of 1963, while the U25B was available until 1966.

An EMD GP30 originally owned by the Louisville and Nashville Railroad -- Oak Ridge, TN.

Most major railroads ordered GP30s, and many smaller ones did too. The largest orders were from the SOU (120), UP (111), ATSF (85), and the B&O (77).

The sole purchaser of B units (by the mid-1960s generally an outdated concept) was the UP, who kept the practice of running its locomotives in matched sets much longer than others. Thirteen of those GP30B units were fitted with steam generators for heating passenger trains, the only GP30s to receive them. Prior to Amtrak, UP would use a GP30 and two boiler equipped GP30Bs on passenger trains when no E8s or E9s were available.

Some units for the GM&O, MILW and SOO were built using trucks from ALCO trade-ins and therefore ride on AAR type B trucks instead of the EMD standard Blomberg Bs. An indisputable tribute to the quality of the GP30 design is the fact that a good number are still in service as of 2015, which is a service lifespan of over 50 years and well in excess of the design life of 25–30 years for the average diesel locomotive. Furthermore, when life-expired, some railroads chose to give them major rebuilds instead of scrapping them.

Specifically, the Burlington Northern rebuilt GP30 (and GP35) units to the specifications of the later GP39. These rebuilds (known as GP39Es, GP39Ms and GP39Vs[5]) came not only from the ranks of the units the BN inherited from its own merger, but from the Union Pacific, Southern Pacific, SAL, Southern and others. Some of these units received new EMD spartan cabs.[6]

The Chessie System rebuilt its GP30 units into GP30Ms,[7] adding newer components, new traction motors and reducing their power to 2000 hp.[8] They lasted with CSX into the mid-to-late 1990s, long after Seaboard System GP30s had been sold, retired and scrapped, or turned into road slugs.[9]

Original buyers

Cab-equipped 'A' units

RailroadQuantityRoad numbersNotes
Electro Motive Division (demonstrator) 2 5629 to Union Pacific Railroad 875
5639 to Seaboard Air Line Railroad 534, to Seaboard Coast Line Railroad 1343
Alaska Railroad 1 2000
Atchison, Topeka and Santa Fe Railway 85 1200–1284 Renumbered 3200–3284. Rebuilt versions called GP30u**upgraded at Cleburne, Texas shops.
Atlantic Coast Line Railroad 9 900–908 to Seaboard Coast Line Railroad 1300–1308
Baltimore and Ohio Railroad 77 6900–6976
Chesapeake and Ohio Railway 48 3000–3047
Chicago, Burlington and Quincy Railroad 38 940–977 to Burlington Northern Railroad 2217–2254
Chicago and Eastern Illinois Railroad 3 239–241
Chicago Great Western Railway 8 201–208 to Chicago & North Western Railway 802–809
Chicago, Milwaukee, St. Paul and Pacific Railroad 16 340–355 AAR type B trucks. Renumbered 1000–1015
Chicago and North Western Railway 14 810–832
Canadian Pacific Railway 2 8200–8201 Built by General Motors Diesel (GMD) in London, Ontario. Renumbered 5000–5001
Denver and Rio Grande Western Railroad 28 3001–3028
Great Northern Railway 17 3000–3016 to Burlington Northern Railroad 2200–2216
Gulf, Mobile and Ohio Railroad 31 500–530 AAR type B trucks
Kansas City Southern Railway 20 100–119
Louisville and Nashville Railroad 58 1000–1057
New York Central Railroad 10 6115–6124 to Penn Central 2188–2197, to Conrail same numbers
New York, Chicago and St. Louis Railroad 10 900–909 to Norfolk and Western 2900-2909
Norfolk and Western Railway 44 522–565 High short hood, operated long hood-forward
Pennsylvania Railroad 52 2200–2251 2250-2251 renumbered to Penn Central then Conrail 2198–2199, 2200–2249 to Penn Central then Conrail same numbers
Phelps Dodge Corporation 9 24–32 New Cornelia Branch mine[10]
Reading Railroad 20 5501–5520 renumbered 3600–3619; to Conrail 2168-2187
Seaboard Air Line Railroad 34 500–533 to Seaboard Coast Line Railroad 1309–1342
Soo Line Railroad 22 700–721 AAR type B trucks. Eighteen to Wisconsin Central Limited, same numbers
Southern Pacific Railroad 8 7400–7407
Southern Railway 120 2525–2644 High short hood
St. Louis Southwestern Railway 10 750–759
Toledo, Peoria and Western Railway 1 700 To ATSF as 3285.
Union Pacific Railroad 111 700–735, 800–874
Totals908

Cabless booster 'B' units

RailroadQuantityRoad numbersNotes
Union Pacific Railroad 40 700B–739B Thirteen units, 727B-739B, fitted with steam generators
Totals40

Rebuilds

BNSF #2831, a GP39M, leading BNSF #1418, a GP10.
BNSF #2472, a GP30u.

The Burlington Northern Railroad was the most extensive user of rebuilt GP30s. Finding a need for modernized units of lower power, it sent GP30s—-both its own and units purchased from other railroads-—to be rebuilt. Seventy units were sent to EMD, 65 to Morrison Knudsen (now Washington Group International) and 25 to VMV for rebuilding, and the rebuilds are known as GP39E, GP39M, and GP39V respectively. The changes included new generators, Dash-2 modular electronic control systems and 567D3 engines upgraded with EMD 645-series power assemblies, rated at 2,300 hp (1,720 kW) and designated 12-645D3. These units are still in service on locals and smaller lines throughout the BNSF Railway system.

The Atchison, Topeka and Santa Fe Railway (ATSF) had previously, performed a similar upgrade in its own Cleburne, Texas shops, stripping the locomotives down to bare metal and rebuilding with new equipment. The 567D3 engines were upgraded to a 2500-horsepower rating by the use of 645-series power assemblies. The generators and traction motors were upgraded and control and electrical equipment was replaced. The trucks received Hyatt roller bearings and single-shoe brake systems. Rooftop air conditioners and new horns were added. The locomotives were repainted in the blue and yellow Yellowbonnet scheme, and designated GP30u (for upgraded). 78 of these survived until the BNSF merger, and were eventually all sold off. In 2016, BNSF traded Larry's Truck and Electric (LTEX) 26 GP38s for 24 of the Ex-ATSF GP30u's for their GP39-3 rebuild program. The Reading Blue Mountain and Northern Railroad acquired a total of 6 of the former BNSF/ATSF GP30u's from LTEX and designates them as GP39RN locomotives.[11]

The Soo Line Railroad rebuilt three GP30s with CAT 3515 engines rated at 2,000 horsepower (1.49 MW). These were designated GP30C.

The Illinois Central Gulf Railroad rebuilt two GP30s in the early 1980s. These units were designated GP26. As of 2018, the units remain in service on the Cimarron Valley Railroad.[12]

Preserved units

Many GP30s have been preserved by a variety of museums, societies and tourist railways. All preserved examples are cab units, as the cabless booster units have been scrapped. A number of these preserved locomotives are in operational condition. The following is a list of preserved GP30s in North America.

See also

References

  1. Electro-Motive Division (1963). Diesel locomotive operating manual for model GP30. La Grange, Illinois: General Motors.
  2. Marre, Louis A. (1995). Diesel locomotives : the first 50 years : a guide to diesels built before 1972. Waukesha, WI: Kalmbach Pub. Co. pp. 60–61. ISBN 0-89024-258-5. OCLC 34531120.
  3. 1 2 3 4 Schafer, Mike (1998). Vintage diesel locomotives. Osceola, WI: Motorbooks International. p. 40. ISBN 0-7603-0507-2. OCLC 38738930.
  4. 1 2 Peck, David (May 1989). "EMD GP30 Part 1". Mainline Modeler.
  5. "BN GP39m Rebuild Program". railsnorthwest.com. Retrieved 2019-06-21.
  6. "BNSF 2749". www.rrpicturearchives.net. Retrieved 2019-06-21.
  7. "RailPictures.Net Photo: CSXT 4203 CSX Transportation (CSXT) EMD GP30M at McKeesport, Pennsylvania by BurghMan". www.railpictures.net. Retrieved 2019-06-21.
  8. "CSX GP30M/GP30?SLUGS". Trainorders.com Discussion. Retrieved 2019-06-21.
  9. "CSX 2251 veteran of the Bone Valley". www.rrpicturearchives.net. Retrieved 2019-06-21.
  10. "Ex Phelps-Dodge RC pit loco Southwestern 29".
  11. "Roster". Reading Blue Mountain and Northern Railroad. Retrieved July 13, 2017.
  12. Guss, Chris (July 2018). "2018's three to watch". Trains. Vol. 78, no. 7. p. 18. ISSN 0041-0934.
  13. https://savethechessie.org/. {{cite web}}: Missing or empty |title= (help)

Further reading

  • Guss, Chris (May 2017). "EMD's unique GP30 soldiers on". Trains. Vol. 77, no. 5. p. 20. ISSN 0041-0934.
  • Schafer, Mike (1998). Vintage Diesel Locomotives. Enthusiast Color Series. Osceola, Wisconsin: MBI Publishing. ISBN 978-0-7603-0507-2.
  • Wilson, Jeff (2017). Guide to North American Diesel Locomotives. Waukesha, Wisconsin: Kalmbach Publishing. ISBN 978-1-62700-455-8.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.