Boston Whaler
FoundedJune 5, 1958
FounderDick Fisher
Headquarters,
ProductsFiberglass boats
ParentBrunswick Boat Group
17-foot (5.2 m) Boston Whaler Montauk in 2002

Boston Whaler is an American boat manufacturer. It is a subsidiary of the Brunswick Boat Group, a division of the Brunswick Corporation. Boston Whalers were originally produced in Massachusetts, hence the name, but today are manufactured in Edgewater, Florida.

History

Richard "Dick" Fisher graduated from Harvard University in 1936. He ran a company building small, lightweight boats out of balsa wood. He designed a rowboat and got the materials to build it, but he never completed it.

In the 1950s, polyurethane foam, a stiff, lightweight, buoyant material, was invented. Fisher imagined it as a replacement for the lightweight balsa used in small boat construction, and in 1954 he constructed a small sailing dinghy filled with the foam, with a design similar to the Sunfish. He showed the finished product to his friend, naval architect C. Raymond Hunt. Hunt recognized potential in the process, however he did not feel the design was particularly suited to sailboats. Instead, he created a design based on the Hickman Sea Sled featuring a cathedral hull.

Fisher built a prototype out of Styrofoam and Epoxy. "It had two keels," said Fisher, "one inverted V between the runners and an anti-skid, anti-trip chine." Fisher tested the boat all that summer and thought it was “the greatest thing ever”. That fall, Fisher started running the boat in rough weather, and found that the hull displayed issues with handling and cavitation. Under heavy load, and off-plane, the cavity in the middle of the hull forced air into the water, and then back into the prop. Fisher approached Hickman, the original designer of the wooden Sea Sled for a solution. However, Hickman thought his design needed no modifications. Fisher contemplated putting "some stuff on the bottom to move that airy water out of there." He used a method of trial and error, laying fiberglass on the bottom of the hull in the morning and running the boat behind his house when the glass cured. If the design did not work, he would bring it back to his house and start over.

This prototype boat began to have a slight V bottom and the two runners on the sides. Fisher then approached Hunt to examine the design changes. Hunt added his own design changes to the prototype; most notably, a third runner in the center of the hull. Fisher then built a prototype based on this new design to serve as a plug for the production mold.

Fisher and Hunt then took the boat on sea trials. One of these tests was to run the 13-foot (4.0 m) boat from Cohasset, Massachusetts to New Bedford and back, which is roughly 120 miles (190 km). During these sea trials, Fisher found another small flaw in the boats design: it was "wetter than hell." "A lot wetter," he said, "than the other boat had been." The reason for this, according to him, was the 9-inch-wide (23 cm) sole throwing spray into the boat.[1] Since the mold was already made, it was modified by adding to the flat center between the three chines, turning it into a V-shape. In 1956, this design became the original Boston Whaler 13.

In 1958, boats made by the Fisher-Pierce manufacturing company were first marketed and sold under the brand name Boston Whaler. The boat was very stable and had great carrying capacity. These two features, along with great performance and rough weather handling made it very desirable. Also since the Whaler was so light in weight compared to the other boats at the time, it could be propelled by lower horsepower engines.[2] Thru the late 1980s, the classic 13 ft 4 in (4.06 m) Whaler, and the 16 ft 7 in (5.05 m) Montauk were the most popular models in terms of sales. Gradually though the company moved away from these designs to a more conventional deep-vee hull, and after 1996 no more of the classic tri-hull boats were manufactured.

In 1969 the Boston Whaler boat operation of Fisher-Pierce was sold to the CML Group, whose portfolio would eventually include brands such as NordicTrack and The Nature Company. In 1989, amidst financial problems, the CML Group sold Boston Whaler to the Reebok Corporation, where, despite several advertising campaigns and new hull designs, it did relatively poorly, and was sold to Meridian Sports in 1994. Two years later in 1996 Brunswick Corporation purchased Boston Whaler for $27.4 million in cash and debt.

Users

The 110 Sport
Boston Whaler on harbor defense in Danang Harbor, South Vietnam, August 1966

While Boston Whalers are primarily seen as recreational boats, Brunswick Boats maintains a commercial division that sells Boston Whalers to coast guard and naval units worldwide. Boston Whalers were used in the Vietnam War by both the Navy SEALs and the United States Coast Guard in rescue and river patrol missions.[3]

Current models

Current production models range in length from 11.3 to 42.5 feet (3.4 to 13.0 meters). Brunswick also owns Mercury Marine; as a result, new Boston Whalers, like all other Brunswick boats, ship from the factory already equipped with Mercury engines. Models include:

Current Recreational Models
NameLengthLayoutMin HPMax HP
Tender11.3 feet (3.4 m)Skiff515
Sport<11.3 feet (3.4 m)Skiff525
Super Sport13 feet (4.0 m)Skiff2540
Super Sport16 feet (4.9 m)Skiff7590
Montauk15.4 feet (4.7 m)Center Console4060
Montauk17.3 feet (5.3 m)Center Console90115
Montauk19.3 feet (5.9 m)Center Console115150
Montauk21.3 feet (6.5 m)Center Console150200
Dauntless17 feet (5.2 m)Center Console90115
Dauntless18 feet (5.5 m)Center Console135150
Dauntless21 feet (6.4 m)Center Console150200
Dauntless24.6 feet (7.5 m)Center Console250350
Dauntless27.8 feet (8.5 m)Center Console350600
Outrage18.8 feet (5.7 m)Center Console115200
Outrage23 feet (7.0 m)Center Console250350
Outrage25.4 feet (7.7 m)Center Console350450
Outrage28 feet (8.5 m)Center Console500800
Outrage33 feet (10 m)Center Console500800
Outrage35.7 feet (10.9 m)Center Console7501,200
Outrage38 feet (12 m)Cuddy Cabin9001,600
Outrage42.5 feet (13.0 m)Cuddy Cabin1,2001,675
Vantage23 feet (7.0 m)Center Console250350
Vantage28 feet (8.5 m)Center Console400600
Vantage33.5 feet (10.2 m)Cuddy Cabin500800
Conquest27.8 feet (8.5 m)Cuddy Cabin450500
Conquest32.2 feet (9.8 m)Cuddy Cabin600800
Conquest36 feet (11 m)Cuddy Cabin7501,200
Conquest41.3 feet (12.6 m)Cuddy Cabin1,2001,600
Realm35.5 feet (10.8 m)Cuddy Cabin7501,200
Realm38 feet (12 m)Cuddy Cabin1,2001,600
Commercial Models [4]
NameBased OnLengthLayoutMin HPMax HPStatus
GuardianMontauk15 feet (4.6 m)Center Console4060defunct
GuardianMontauk17 feet (5.2 m)Center Console80100defunct
GuardianOutrage18 feet (5.5 m)Center Console90200defunct
GuardianOutrage19 feet (5.8 m)Center Console115200defunct
GuardianOutrage21.3 feet (6.5 m)Center Console85240current
GuardianOutrage25.6 feet (7.8 m)Center Console115300current
GuardianOutrage27 feet (8.2 m)Center Console300600defunct
JusticeConquest20 feet (6.1 m)Center Console135250defunct
JusticeConquest25.41 feet (7.74 m)Center Console200400current
JusticeConquest28.41 feet (8.66 m)Center Console400500current
JusticeConquest32 feet (9.8 m)Center Console400600defunct
JusticeConquest37 feet (11 m)Center Console750900defunct
ChallengerConquest27 feet (8.2 m)Cuddy Cabin300600defunct
ChallengerConquest35 feet (11 m)Cuddy Cabin300600defunct
VigilantConquest27 feet (8.2 m)Cuddy Cabin400450defunct
Protector Impact25 feet (7.6 m)Center Console450current
Protector Impact30.3 feet (9.2 m)Center Console900current

Advertising and unsinkability claim

A Boston Whaler of the Bermuda Police Service

Boston Whaler has, for many years, sawn boats in half to illustrate their durability, performance, smooth ride and "unsinkability". The original 1961 Life magazine ad pictured Dick Fisher sitting in a floating 13-foot (4.0 m) Whaler with a crosscut saw halfway through the hull.[5] After the cut was completed, Fisher used the stern section to tow the bow section back to shore. Modern Whaler advertising uses a chain saw. Due to the foam core construction, the Whaler will remain afloat when sawed completely in half.[6] Boston Whaler boats also remain afloat when completely swamped (full of water). Because of these attributes, Boston Whaler's trademarked sales line is "the unsinkable legend."

Today, this "unsinkable" attribute is not exclusive to Boston Whalers. All motorboats (and certain other boat types) under 20 feet (6.1 m), manufactured for sale in the United States are required by law to have positive flotation, such that a completely swamped boat will still float.[7] This is accomplished through the use of closed cell foam, or other non-permeable material. Boston Whaler, however, does claim to exceed the Coast Guard requirements.[8]

A 25-foot (7.6 m) Boston Whaler and its U.S. Coast Guard crew takes off from the coast of Mile Hammock Bay near Camp Lejeune, North Carolina

See also

Designs

Other

References

  1. Matthew D. Plunkett (1 September 2017). Unsinkable: The History of Boston Whaler. Motorbooks. p. 18. ISBN 978-0-7603-6000-2.
  2. "continuous Wave: Whaler (Boston Whaler)". Retrieved 2011-08-04.
  3. "Patrol Craft Sold for Export". Archived from the original on 2006-05-09. Retrieved 2006-06-24.
  4. "Boston Whaler Guardian - Durable & Reliable Watercraft". Brunswick Commercial & Government Products. Retrieved 2022-08-14.
  5. Hebert, Jim (February 2000). "Original Design and Conception of the 13-foot (4.0 m) Whaler Hull". continuouswave.com. Retrieved 2006-06-09.
  6. "Boston Whaler Was Always Ahead of Its Time". Retrieved 2014-08-10.
  7. "Boatbuilder's Handbook — Flotation". U.S. Coast Guard. Archived from the original on 2006-09-09. Retrieved 2006-09-19.
  8. "Boston Whaler". Boston Whaler, Inc. Archived from the original on 2009-03-18. Retrieved 2007-06-24.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.