Colorado River

I-70 enters Colorado from Utah, concurrent with US 6 and US 50, on a plateau between the north rim of Ruby Canyon of the Colorado River and the south rim of the Book Cliffs. The plateau ends just past the state line and the highway descends into the Grand Valley, formed by the Colorado River and its tributaries.^[2] The Grand Valley is home to several towns and small cities that form the Grand Junction Metropolitan Statistical Area, the largest conurbation in the area regionally known as the Western Slope. The highway directly serves the communities of Fruita, Grand Junction, and Palisade. Grand Junction is the largest city between Denver and Salt Lake City and serves as the economic hub of the area.^[3] The freeway passes to the north of downtown, while US 6 and US 50 retain their original routes through downtown. US 6 rejoins I-70 east of Grand Junction; US 50 departs on a course toward Pueblo.^[2]

I-70 exits the valley through De Beque Canyon, a path carved by the Colorado River that separates the Book Cliffs from Battlement Mesa. The river and its tributaries provide the course for the ascent up the Rocky Mountains. In the canyon, I-70 enters the Beavertail Mountain Tunnel, the first of several tunnels built to route the freeway across the Rockies. This tunnel design features a curved side wall, unusual for tunnels in the United States, where most tunnels feature a curved roof and flat side walls. Engineers borrowed a European design to give the tunnel added strength.^[4] After the canyon winds past the Book Cliffs, the highway follows the Colorado River through a valley containing the communities of Parachute and Rifle.^[2]

Glenwood Canyon

East of the city of Glenwood Springs, the highway enters Glenwood Canyon. Both the federal and state departments of transportation have praised the engineering achievement required to build the freeway through the narrow gorge while preserving the natural beauty of the canyon.^[4][5] A 12-mile (19 km) section of roadway features the No Name Tunnel, Hanging Lake Tunnel, Reverse Curve Tunnel, 40 bridges and viaducts, and miles of retaining walls.^[6] Through a significant portion of the canyon, the eastbound lanes extend cantilevered over the Colorado River and the westbound lanes are suspended on a viaduct several feet above the canyon floor.^[5][7] Along this run, the freeway hugs the north bank of the Colorado River, while the Central Corridor of the Union Pacific Railroad (formerly the Denver and Rio Grande Western Railroad) occupies the south bank.^[2]

The western portal of the Hanging Lake Tunnel; at this point in the canyon both the river and the railroad are directly below the freeway viaducts.

To minimize the hazards along this portion, a command center staffed with emergency response vehicles and tow trucks on standby monitors cameras along the tunnels and viaducts in the canyon. Traffic signals have been placed at strategic locations to stop traffic in the event of an accident, and variable message signs equipped with radar guns will automatically warn motorists exceeding the design speed of one of the curves.^[8]

Rocky Mountains

The highway departs the Colorado River near Dotsero, the name given to the railroad separation for the two primary mountain crossings, the original via Tennessee Pass/Royal Gorge and the newer and shorter Moffat Tunnel route.^[9] I-70 uses a separate route between the two rail corridors. From this junction, I-70 follows the Eagle River toward Vail Pass, at an elevation of 10,666 feet (3,251 m). In this canyon, I-70 reaches the western terminus of US 24, which meanders through the Rockies before rejoining I-70. US 24 is known as the Highway of the Fourteeners, from the concentration of mountains exceeding 14,000 feet (4,300 m) along the highway corridor.^[10] Along the ascent, I-70 serves the ski resort town of Vail and the ski areas of Beaver Creek Resort, Vail Ski Resort, and Copper Mountain.^[2]

Entrance to the Eisenhower Tunnel

The construction of the freeway over Vail Pass is also listed as an engineering marvel. One of the challenges of this portion is the management of the wildlife that roams this area. Several parts of the approach to the pass feature large fences that prevent wildlife from crossing the freeway and direct the animals to one of several underpasses. At least one underpass is located along a natural migratory path and has been landscaped to encourage deer to cross.^[1][11]

The highway descends to Dillon Reservoir, near the town of Frisco, and begins one final ascent to the Eisenhower Tunnel, where the freeway crosses the Continental Divide. At the time of dedication, this tunnel was the highest vehicular tunnel in the world, at 11,158 feet (3,401 m).^[12] As of 2010, the facility was still the highest vehicular tunnel in the US.^[6] The Eisenhower Tunnel is noted as both the longest mountain tunnel and the highest point on the Interstate Highway System.^[12] The tunnel has a command center, staffed with 52 full-time employees, to monitor traffic, remove stranded vehicles, and maintain generators to keep the tunnel's lighting and ventilation systems running in the event of a power failure. Signals are placed at each entrance and at various points inside the tunnel to close lanes or stop traffic in an emergency.^[12] There are several active and former ski resorts in the vicinity of the tunnel, including Breckenridge Ski Resort, Keystone Resort, Arapahoe Basin, Loveland Ski Area, Berthoud Pass Ski Area, and Winter Park Resort.^[2]

Clear Creek

The freeway follows Clear Creek down the eastern side of the Rockies, passing through the Veterans Memorial Tunnels^[13] near Idaho Springs. Farther to the east, I-70 departs the US 6 corridor, which continues to follow Clear Creek through a narrow, curving gorge. The Interstate, however, follows the corridor of US 40 out of the canyon. The highway crests a small mountain near Genesee Park to descend into Mount Vernon Canyon to exit the Rocky Mountains.^[2] This portion features grade-warning signs with unusual messages, such as "Trucks: Don't be fooled", "Truckers, you are not down yet", and "Are your brakes adjusted and cool?".^[14][15] Runaway truck ramps are a prominent feature along this portion of I-70,^[4] with a total of seven used along the descent of either side the Continental Divide to stop trucks with failed brakes.^[1]

Warning sign stating, "Trucks, Don't be Fooled—4 more miles [6.4 km] of steep grades and sharp curves"

The last geographic feature of the Rocky Mountains traversed before the highway reaches the Great Plains is the Dakota Hogback. The path through the hogback features a massive cut that exposes various layers of rock millions of years old. The site includes a nature study area for visitors.^[4][16]

Great Plains

As the freeway passes from the Rocky Mountains to the Great Plains, I-70 enters the Denver metropolitan area, part of a larger urban area called the Front Range Urban Corridor. The freeway arcs around the northern edge of the LoDo district, the common name of the lower downtown area of Denver. Through the downtown area, US 40 is routed along Colfax Avenue, which served as the primary east–west artery through the Denver area before the construction of I-70. Through downtown, US 6 is routed along 6th Avenue before departing the I-70 corridor to join I-76 on a northeast course toward Nebraska.^[2] The freeway meets I-25 in an interchange frequently called the Mousetrap.^[4] From I-25 on to I-225, I-70 serves—together with those two Interstates—as part of an inner beltway around Denver.^[17]

I-70 westbound at the US 287 interchange in Denver

I-70 has one official branch in Colorado, I-270, which connects the Interstate with the Denver–Boulder Turnpike. Where these two freeways merge is the busiest portion of I-70 in the state, with an average of 183,000 vehicles per day as of 2009.^[18] While State Highway 470 (SH 470) and E-470 are not officially branches of I-70, they are remnants of plans for an I-470 outer beltway around Denver that were canceled when the allocated funds were spent elsewhere.^[19]

Leaving Denver, the highway serves the redevelopment areas on the former site of Stapleton International Airport; runway 17R/35L crossed over the Interstate at the runway's midsection.^[2] East of Aurora, I-70 rejoins the alignment of US 40 at Colfax Avenue. The freeway proceeds east across the Great Plains, briefly dipping south to serve the city of Limon, which bills itself as Hub City because of the many rail and road arteries that intersect there.^[20] I-70 enters Kansas near Burlington, a small community known for having one of the oldest carousels in the United States.^[21]

Earlier routes

Before the formation of the US Highway System, the country relied on an informal network of roads, organized by various competing interests, collectively called the auto trail system. The surveyors of most trails chose either South Pass in Wyoming or a southern route through New Mexico to traverse the Rocky Mountains. Both options were less formidable than the higher mountain passes in Colorado but left the state without a transcontinental artery. When the planners of the Lincoln Highway also decided to cross the Rockies in Wyoming, officials pressed for a loop to branch from the main route in Nebraska, enter Colorado, and return to the main route in Wyoming. While the Lincoln Highway was briefly routed this way, the loop proved impractical and was soon removed.^[22]

I-70 crossing the Rocky Mountains

After losing the connection to the Lincoln Highway, officials convinced planners of the Victory Highway to traverse the state. The highway entered Colorado from Kansas along what was previously called the Smoky Hill Trail. The highway crossed the mountains along a trail blazed by a railroad surveyor and captain in the American Civil War, cresting at Berthoud Pass.^[22] After a round of political infighting between Utah and Nevada, the Victory Highway would become the Lincoln Highway's main rival for San Francisco-bound traffic.^[23] When the U.S. Highway system was unveiled in 1926, the Victory Highway was numbered US 40.^[22]

While US 6 was also one of the original 1926 US Highways, the road originally served the portion of the country east of the Rocky Mountains. The highway was not extended to the Pacific coast until 1937, mostly following the Midland Trail.^[24] Around the time the U.S. Highway system was formed, the portion of the Midland Trail through Glenwood Canyon, known as the Taylor State Road, was destroyed by a flood.^[22] When US 6 was extended, the Works Progress Administration was rebuilding the road through the canyon and the Public Works Administration was nearing completion of a new highway over Vail Pass.^[11][22] In western Colorado, US 6 was routed concurrent with US 50 from the Utah state line to Grand Junction and eventually replaced US 24 from Grand Junction to near Vail.^[25] To keep these routes over the Rockies competitive with alternatives in other states, the Colorado Department of Highways relied on ingenuity to keep the roads safe. The department pioneered new machines to clear snow and various bridge and culvert designs to protect the roads from flooding.^[22]

Interstate Highway planning

I-70 descending into Clear Creek Canyon

Governor Edwin C. Johnson, for whom one of the tunnels along I-70 was later named, was a primary force in persuading the planners of the Interstate Highway System to extend the highway across the state. He stated to the Senate subcommittee in 1955:

You are going to have a four-lane highway through Wyoming. You are going to build two four-lane highways through New Mexico and Arizona. Colorado needs to be able to compete with our neighboring states. We do not want to take anything away from them. We do not want them to get way out ahead of us, either, because these interstate highways are going to be very attractive highways for the East and West to travel on.^[11]

Colorado held several meetings to convince reluctant Utah officials they would benefit from a freeway link between Denver and Salt Lake City. Utah officials expressed concerns that, given the terrain between these cities, this link would be difficult to build. They later expressed concerns that the construction would drain resources from completing Interstate Highways they deemed to have a higher priority. Colorado officials persisted, presenting three alternatives to route I-70 west of Denver, using the corridors of US 40, US 6, and a route starting at Pueblo, proceeding west along US 50/US 285/US 24. In March 1955, Colorado officials succeeded in convincing Utah officials with the state legislature passing a resolution supporting a link with Denver. The two states jointly issued a proposal to Congress that would extend the plans for I-70 along the US 6 corridor. Under this proposal, the freeway would terminate at I-15 near Spanish Fork, Utah, linking the Front Range and Wasatch Front metropolitan areas.^[11]

Beavertail Mountain tunnel as seen from Amtrak's California Zephyr

Congress approved the extension of I-70; however, the route still had to be approved by the representatives of the military on the planning committee. Military representatives were concerned that plans for this new highway network did not have a direct connection from the central part of the country to Southern California; and further felt Salt Lake City was adequately connected. Military planners approved the extension but moved the western terminus south to Cove Fort, using I-70 as part of a link between Denver with Los Angeles instead of Salt Lake City. Utah officials objected to the modification, complaining they were being asked to build a long and expensive freeway that would serve no populated areas of the state. After being told this was the only way the military would approve the extension, Utah officials agreed to build the freeway along the approved route.^[11]

Construction

View from Loveland Pass, showing a hairpin turn along the US 6 alignment on top right, and the straighter I-70 emerging from the Eisenhower Tunnel on the left

The first Colorado portion of I-70 opened to traffic in 1961. This section bypassed and linked Idaho Springs to the junction where US 6 currently separates from I-70 west of the city. The majority of the alignment through Denver was completed by 1964. The Mousetrap reused some structures that were built in 1951, before the formation of the Interstate Highway System. The last piece east of Denver opened to traffic in 1977.^[4]

Eisenhower Tunnel

Main article: Eisenhower Tunnel

Planning on how to route the freeway over the Rocky Mountains began in the early 1960s. The US 6 corridor crosses two passes: Loveland Pass, at an elevation of 11,992 feet (3,655 m), and Vail Pass, at 10,666 feet (3,251 m).^[2] Engineers recommended tunneling under Loveland Pass to bypass the steep grades and hairpin curves required to navigate US 6. The project was originally called the Straight Creek Tunnel, after the waterway that runs along the western approach. The tunnel was later renamed the Eisenhower–Johnson Memorial Tunnel, after President Dwight D. Eisenhower and Colorado Governor Edwin C. Johnson.^[12]

Construction on the first bore of the tunnel was started on March 15, 1968.^[12] Construction efforts suffered many setbacks, and the project went well over time and budget. One of the biggest setbacks was the discovery of fault lines in the path of the tunnel that were not discovered during the pilot bores.^[26] These faults began to slip during construction and emergency measures had to be taken to protect the tunnels and workers from cave-ins and collapses.^[22] A total of nine workers were killed during the construction of both bores. Further complicating construction was that the boring machines could not work as fast as expected at such high altitudes, and the productivity was significantly less than planned. The frustration prompted one engineer to comment, "We were going by the book, but the damned mountain couldn't read."^[26] The first bore was dedicated March 8, 1973. Initially, this tunnel was used for two-way traffic, with one lane for each direction. The amount of traffic through the tunnel exceeded predictions, and efforts soon began to expedite construction on the second tube (the Johnson bore), which was finished on December 21, 1979.^[12] The initial engineering cost estimate for the Eisenhower bore was $42 million; the actual cost was $108 million (equivalent to $546 million in 2022^[27]). Approximately 90 percent of the funds were paid by the federal government, with the state of Colorado paying the rest. At the time, this figure set a record for the most expensive federally aided project. The excavation cost for the Johnson bore was $102.8 million (equivalent to $414 million in 2022^[27]).^[26][28]

Rest area along I-70 at the top of Vail Pass

The tunnel construction became involved in the women's rights movement due to advocacy by Janet Bonnema after she was subjected to gender-based discrimination after being hired as an engineering technician for the construction of the Straight Creek Tunnel in 1970. Bonnema was restricted from entering the tunnel due to the miners' superstition that women who entered underground mines and tunnels would bring bad luck. In 1972, Bonnema filed a $100,000 class action suit against CDOT, citing Title VII of the Civil Rights Act of 1964. As Colorado voters had passed the Equal Rights Amendment that year, the state settled Bonnema's case out of court for $6,730. Bonnema entered the tunnel for the first time on November 9, 1972, prompting 66 workers to temporarily walk off the job; most returned the next day. She continued with the project until the tunnel opened.^[29]

Glenwood Canyon

I-70 in Glenwood Canyon as seen from Amtrak's California Zephyr

Glenwood Canyon has served as the primary transportation artery through the Rocky Mountains, even before the creation of U.S. Highways. Railroads have used the canyon since 1887, and a dirt road was built through the canyon in the early 20th century.^[8] The first paved road was built from 1936 to 1938 at a cost of $1.5 million (equivalent to $24.6 million in 2022^[27]).^[22]

With the Eisenhower Tunnel finished, the last remaining obstacle for I-70 to be an interstate commercial artery was the two lane, non-freeway portion in Glenwood Canyon. Construction had started on this section in the 1960s with a small section opening to traffic in 1966.^[4] The remainder was stopped due to environmentalist protests that caused a 30-year controversy.^[11] The original design was criticized as "the epitome of environmental insensitivity". Engineers scrapped the original plans and started work on a new design that would minimize additional environmental impacts.^[31] A new design was underway by 1971, which was approved in 1975; however, environmental groups filed lawsuits to stop construction, and the controversy continued even when construction finally resumed in 1981.^[22] The final design included 40 bridges and viaducts, three additional tunnel bores (two were completed before construction was stopped in the 1960s), and 15 miles (24 km) of retaining walls for a stretch of freeway 12 miles (19 km) long.^[6] The project was further complicated by the need to build the four-lane freeway without disturbing the operations of the railroad. This required using special and coordinated blasting techniques.^[32] Engineers designed two separate tracks for the highway, one elevated above the other, to minimize the footprint in the canyon.^[8] The final design was praised for its environmental sensitivity. A Denver architect who helped design the freeway proclaimed, "Most of the people in western Colorado see it as having preserved the canyon." He further stated, "I think pieces of the highway elevate to the standard of public art."^[31] A portion of the project included shoring up the banks of the Colorado River to repair damage and remove flow restrictions created in the initial construction of US 6 in the 1930s.^[33]

CDOT drawing showing how reusing the existing footprint of US 6 combined with elevating two lanes helped minimize the environmental impact of the freeway on Glenwood Canyon

The freeway was finally completed on October 14, 1992, in a ceremony covered nationwide.^[34][35] Most coverage celebrated the engineering achievement or noted this was the last major piece of the Interstate Highway System to open to traffic. However, newspapers in western Colorado celebrated the end of the frustrating traffic delays. For most of the final 10 years of construction, only a single lane of traffic that reversed direction every 30 minutes remained open in the canyon. One newspaper proudly proclaimed "You heard right. For the first time in more than 10 years, construction delays along that 12-mile [19 km] stretch of Interstate 70 will be non-existent."^[36]

The cost was $490 million (equivalent to $922 million in 2022^[27]) to build 12 miles (19 km), 40 times the average cost per mile predicted by the planners of the Interstate Highway System.^[22] This figure exceeded that of I-15 through the Virgin River Gorge, which was previously proclaimed the most expensive rural freeway in the country.^[37] The construction of I-70 through Glenwood Canyon earned 30 awards for CDOT,^[8] including the 1993 Outstanding Civil Engineering Achievement Award from the American Society of Civil Engineers.^[38] At the dedication, it was claimed that I-70 through Glenwood Canyon was the final piece of the Interstate Highway System to open to traffic. For this reason, the system was proclaimed to be complete.^[6][8] However, at the time, there were still two sections of the original Interstate Highway System that had not been constructed: a section of I-95 in central New Jersey,^[39] that was not completed until 2018,^[40] and a section of I-70 in Breezewood, Pennsylvania.^[41]

Incidents

On August 1, 1984, a truck carrying six torpedos for the US Navy overturned while navigating a ramp at the Mousetrap, a complex interchange. The situation was made worse as no one answered at the phone number provided with the cargo, and an unknown liquid was leaking from one of the torpedoes. It took more than three hours before any military personnel arrived on the scene, US Army personnel from a nearby base. The incident left thousands of cars stranded and Denver's transportation network paralyzed for about eight hours. Approximately 50 residents in the area were evacuated.^[45][46] Investigations later revealed that the truck driver was previously intercepted by the Colorado State Patrol, who specifically warned the driver to avoid the Mousetrap and provided the driver with an alternate route.^[45] The Navy promised reforms after being criticized for providing an unstaffed phone number with a hazardous cargo shipment, a violation of federal law, and failing to notify Denver officials about the shipment.^[47][48] The Mousetrap was grandfathered into the Interstate Highway System, with some structures built in 1951.^[4] The incident provided momentum to rebuild the interchange with a more modern and safer design. Construction began in several phases in 1987, and the last bridge was dedicated in 2003.^[49]

In 2014, mile-marker 420 was altered by CDOT to read "Mile 419.99" following repeat thefts of the original sign due to the significance of the number 420 in cannabis culture.^[50]

In 2019, a fiery crash killed four people and injured dozens. A previous, non-fatal accident in Wheat Ridge had resulted in backed up traffic for several miles. At the time of the second collision, the backup extended into Lakewood past the Colorado Mills Parkway exit. A semi-trailer truck descending the grades as the freeway entered the greater Denver area, driven by Rogel Aguilera Mederos, attempted to downshift, but he was unable re-engage the transmission.^[51] This resulted in the vehicle rapidly increasing in speed, with witnesses seeing the truck out of control near the Genesee exit, nine miles (14 km) from where the accident would occur. Witnesses also testified seeing the brakes smoking while the truck descended the hill. The driver passed at least one runaway truck ramp without entering, as well as four other exits where he could have exited the freeway. As the truck approached the backed up traffic, the driver attempted to swerve to the side of the road to avoid a collision but was unable as other trucks had already blocked this path while similarly attempting to avoid a collision. The truck collided with the backup and exploded. Over a dozen other vehicles were involved in the collision and four people died. The driver was charged with numerous offenses, including assault and vehicular homicide and initially sentenced to 110 years. This was controversial, due to the length of the sentence and the opinions of some victims and witnesses that the owner of the truck bore more responsibility. The company had previously been fined and cited for numerous brake-related violations as well as employing inexperienced truck drivers who were not fluent in English.^[52] Aguilera testified through an interpreter in his own defense and pleaded for mercy saying, "I ask God too many times why them and not me? Why did I survive that accident?".^[51] He also blamed his employer, testifying he was instructed to take back roads from the trip's origin in Wyoming and avoid the more commonly used road from Wyoming, I-25.^[53] Shortly after the accident, CDOT announced a location for an additional runaway truck ramp in this area.^[54][55]

After the 2020 Grizzly Creek Fire, I-70 was closed in Glenwood Canyon in August 2021 due to significant damage by debris from the fire, causing large detours.^[56] The damage after the 2021 landslides required lengthy reconstruction of the road; the highway partially reopened on August 14, 2021.^[57][58][59]

Legacy

I-70 through the Colorado Plateau

When first approved, the extension of I-70 from Denver to Cove Fort was criticized in some area newspapers as a road to nowhere;^[60] an information liaison specialist with USDOT in Baltimore, Maryland—the eastern terminus of I-70—claims people have asked "did we think Baltimoreans were so desperate to get to Cove Fort that we were willing to pay $4 billion to get them there?".^[11] However, a resident engineer with USDOT has called the extension one of the "crown jewels" of the Interstate Highway System.^[8] In Colorado, the freeway helped unite the state, despite the two halves being separated by the formidable Rocky Mountains. The Eisenhower Tunnel alone is credited with saving up to an hour from the drive across the state.^[22] Prior to I-70's construction, the highway through Glenwood Canyon was one of the most dangerous in the state. With the improvements, the accident rate has dropped 40 percent even though traffic through the canyon has substantially increased.^[8] CDOT is considering the nomination of various portions of I-70 as a National Historic Landmark, even though the freeway will not qualify as historical for several decades.^[22]

The freeway is credited with enhancing Colorado's ski industry. The ski resort town of Vail did not exist until I-70 began construction, with developers working in close partnership with CDOT.^[22] By 1984, the I-70 corridor between Denver and Grand Junction contained the largest concentration of ski resorts in the country. The towns and cities along the corridor have experienced significant growth, luring recreational visitors from the Denver area. As one conservationist lamented, I-70 "changed rural Colorado into non-rural Colorado".^[22]