Edmonton Group
Stratigraphic range:
Horseshoe Canyon Formation of the Edmonton Group
TypeGeological group
Sub-unitsScollard Formation, Battle Formation, Whitemud Formation, Horseshoe Canyon Formation
UnderliesPaskapoo Formation
OverliesBearpaw Formation, Belly River Group
Thickness328 metres (1,076 ft) to 763 metres (2,503 ft)[1]
Lithology
PrimarySandstone, shale
OtherBentonite, coal
Location
Region Alberta
Country Canada
Type section
Named forEdmonton
Named byJoseph Tyrrell, 1887

Within the earth science of geology, the Edmonton Group is a Late Cretaceous (Campanian stage) to early Paleocene stratigraphic unit of the Western Canada Sedimentary Basin in the central Alberta plains.[2] It was first described as the Edmonton Formation by Joseph Burr Tyrrell in 1887 based on outcrops along the North Saskatchewan River in and near the city of Edmonton.[3] E.J.W. Irish later elevated the formation to group status and it was subdivided into four separate formations.[4] In ascending order, they are the Horseshoe Canyon, Whitemud, Battle and Scollard Formations.[2][1] The Cretaceous-Paleogene boundary occurs within the Scollard Formation, based on dinosaurian and microfloral evidence,[5] as well as the presence of the terminal Cretaceous iridium anomaly.[6]

Distribution and thickness

The Edmonton Group is present in the central plains of Alberta. It consists of sedimentary rocks that were deposited in nonmarine to brackish water environments between the Canadian Rockies in the west and the Western Interior Seaway to the east.[2] Its reaches a maximum thickness of 763 metres (2,503 ft) near the foothills of the Rockies in the west, and thins eastward to zero at its erosional edge east of Edmonton.[1]

Lithology

The Edmonton Group consists of fine-grained sandstones, calcareous sandstones, siltstones, sandy shales and mudstones, bentonitic sandstones and shales, bentonite beds, ironstone concretions, carbonaceous shales and coal seams. Hard sandstones commonly cap mesas, buttes and plateaus where erosion has formed badlands topography, as is the case for much of the Horseshoe Canyon Formation and the Scollard Formation. Coarse-grained sediments are rare in the Edmonton Group.[1]

Paleontology

Plant fossils are common in both the Late Cretaceous and early Paleocene portions of the Edmonton Group.[7] Remains of Triceratops and other dinosaurs are found in the Late Cretaceous portion, especially the Horseshoe Canyon Formation and the lower part of the Scollard Formation. Molluscs such as Ostrea and Unio are found in both portions.[1]

Relationship to other units

The Edmonton Group is disconformably overlain by the Paskapoo Formation and conformably overlies the Bearpaw Formation or, where the Bearpaw is absent, the Belly River Formation.[1]

The Edmonton Group grades into the sequence of the Blood Reserve Formation, St. Mary River Formation and Willow Creek Formation in the southern Alberta plains; into the upper part of the Wapiti Group in the northern Alberta and northeastern British Columbia; and into the upper part of the Brazeau Formation and the Coalspur Formation in the foothills of the Canadian Rockies. It is equivalent to, but not contiguous with, the Eastend Formation, Whitemud Formation, Battle Formation and Frenchman Formation in the Cypress Hills of southeastern Alberta and southwestern Saskatchewan; and with the Fox Hills Formation in Saskatchewan.[2][1]

Formations that are stratigraphically equivalent in the western United States are the Horsethief Formation in Montana; the Fox Hills Formation and Lance Formation in Montana; and the Lennup Formation and Muteetse Formation in Wyoming.[1]

Subdivisions

The formations of the Edmonton Group are:

FormationAgeLithologyMaximum
Thickness		Reference
ScollardMaastrichtian-Paleocenesandstone, siltstone, mudstone, coal400 m (1,310 ft) [1]
Battle FormationMaastrichtianbentonitic silty shale, montmorillonitic clay14 m (50 ft) [1]
WhitemudMaastrichtiankaolinitic sandstone, clay, shale23 m (80 ft) [1]
Horseshoe CanyonCampanian-Maastrichtiansandstone, siltstone, mudstone, coal227 m (740 ft) [1]

See also

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 Glass, D.J., editor, 1997. Lexicon of Canadian Stratigraphy, vol. 4, Western Canada. Canadian Society of Petroleum Geologists, Calgary, Alberta,1423 p. on CD-ROM, ISBN 0-920230-23-7.
  2. 1 2 3 4 Mossop, G.D. and Shetsen, I. (compilers), Canadian Society of Petroleum Geologists (1994). "The Geological Atlas of the Western Canada Sedimentary Basin, Chapter 24: Upper Cretaceous and Tertiary strata of the Western Canada Sedimentary Basin". Retrieved 2016-06-20.{{cite web}}: CS1 maint: multiple names: authors list (link)
  3. ↑ Tyrrell, J.B., 1887. Report on a part of northern Alberta and portions of adjacent Districts of Assiniboia and Saskatchewan. Geological Survey of Canada, Ann. Rept.1886, new ser., v.11, Part E, p.1-176.
  4. ↑ Irish, E.J.W. 1970. The Edmonton Group of south-central Alberta. Bulletin of Canadian Petroleum Geology, vol. 18, p. 125-155.
  5. ↑ Lerbekmo, J.F., Singh, C., Jarzen, D.M., and Russel, D.A. 1979. The Cretaceous-Tertiary boundary in south-central Alberta - a revision based on dinosaurian and microfloral evidence. Canadian Journal of Earth Science, 16: 325-330.
  6. ↑ Lerbekmo, J.F. and St. Louis, R.M. 1985. The terminal Cretaceous iridium anomaly in the Red Deer Valley, Alberta. Canadian Journal of Earth Science, 23: 120-124.
  7. ↑ Bell, W.A. 1949. Uppermost Cretaceous and Paleocene floras of western Canada. Geological Survey of Canada, Bulletin 13, 231 p.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.