AAI CAWS
TypeAutomatic shotgun
Place of originUnited States
Production history
DesignerAAI Corporation
ManufacturerAAI Corporation
Specifications
Mass4.08 kg (9.0 lb)
Length984 mm (38.7 in)

Cartridge12 Gauge Special
12 Gauge (with adapter)
ActionSelect-fire Recoil operated
Rate of fire450 rounds/min
Effective firing range150 m (160 yd)
Feed system12-round detachable box magazine
SightsDay/Night Reflex sight with backup iron sights

The AAI CAWS (Close Assault Weapon System) is a prototype automatic shotgun—designed as a combat shotgun— produced by the AAI Corporation during the 1980s. It was AAI's entry into the U.S military's Close Assault Weapon System program.

It is a 12-round, 12-gauge shotgun with two firing modes: semi-auto and full-auto.

Development

In 1982, the United States was seeking entrants for their Close Assault Weapon System program. Grown out of previous combat shotgun programs, this program had inherited the specification from the RHINO program that had preceded it. These specifications required a magazine capacity of 10 rounds, a requirement for the new ammunition to be incompatible with commercial 12ga shotguns, that felt recoil be no greater than a Remington 870P firing M162 or M257 buckshot cartridges and that the system provide penetration and incapacitation capability significantly better than M162 and M257.[1] In response to this, AAI developed their entrant, the AAI CAWS - a select fire, recoil operated, magazine fed shotgun. Using the standard M-16 stock and pistol grip, recoil operation and with an inline design, felt recoil was supposedly less than an M16. A shorter version, without stock, was also developed for Airborne forces. A day/night Reflex sight was offered as standard.[2]

To meet the requirements to both provide ammunition that could not be fired by commercial shotguns, but also for the weapon to fire commercial ammunition, AAI developed a special cartridge larger than 12-ga and then provided a chamber adapter for the weapon to fire regular 12ga. The standard antipersonnel cartridge developed by AAI was loaded with 8, 1 gram (0.035 oz) drag stabilized flechettes. All 8 flechettes were able to hit a 4 m (4.4 yd) circle at 150 m (160 yd). The flechettes at that range had a velocity of 365 m/s (1,200 ft/s) and were capable of penetrating 76 mm (3.0 in) of pine or 3 mm (0.12 in) of mild steel.

Although tested by the U.S. military, the CAWS was canceled, and production, both military and civilian, has halted.[3]

See also

References

  1. "For Three Decades, the Pentagon Tried and Failed to Build Sci-Fi Shotguns". 7 September 2016.
  2. Hogg, Ian V. Jane's Infantry Weapons 1993-1994. Jane's Information Group. 1993
  3. "Heckler & Koch HK CAWS".


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.