BMW N53 engine
Overview
Production2006–2013
Layout
ConfigurationStraight-6
Displacement2,497 cc (152 cu in)
2,996 cc (183 cu in)
Cylinder bore82 mm (3.2 in)
85 mm (3.3 in)
Piston stroke78.8 mm (3.10 in)
88 mm (3.5 in)
Cylinder block materialMagnesium-Aluminium
Cylinder head materialAluminium
ValvetrainDOHC, with VVT
Combustion
Fuel typePetrol
Chronology
PredecessorBMW N52
SuccessorBMW N54

The BMW N53 is a naturally aspirated straight-6 petrol engine which was produced from 2006 to 2013. The N53 replaced the BMW N52 and was released in 2006 in the post-facelift E60 5 Series.

BMW never sold the N53 engine in North American, Australian and Malaysian vehicles, due to the high sulphur content of the fuel available in these markets.[1] Instead, these regions continued to use its predecessor, the N52 engine.

The N53 is the final naturally aspirated straight-six engine produced by BMW, ending a history of continuous production of this engine configuration since the BMW M30 in 1968. The N53 began to be phased out following the introduction of the BMW N20 turbocharged four-cylinder engine in 2011.

There is no BMW M version of the N53. The BMW N54 turbocharged straight-6 engine was produced alongside the N53.

Design

Double-VANOS, as seen on an N52 engine

Compared with its N52 predecessor which was port-injected, the N53 uses direct injection. The direct injection system uses piezoelectric fuel injectors which inject into the combustion chamber, using a stratified lean mixture operation.[2] The compression ratio was increased to 12.0:1 for the N53.[3]

As per the N52, the N53 has double-VANOS (variable valve timing) and a magnesium alloy block.[3] Unlike the N52, the N53 does not have Valvetronic (variable valve lift), due to space limitations in the cylinder head.[4][5]

The bore of 85 mm (3.35 in) and stroke of 88 mm (3.46 in) are the same as the N52. Each cylinder has coil-on-plug ignition, as per the N52.[6]

Versions

Engine CodeDisplacementPowerTorqueYears
N53B252,497 cc (152.4 cu in)140 kW (188 bhp)
at 6,100 rpm
235 N⋅m (173 lb⋅ft)
at 3,500-5,000 rpm
2006-2010
N53B302,996 cc (182.8 cu in)150 kW (201 bhp)
at 6,100 rpm
270 N⋅m (199 lb⋅ft)
at 1,500-4,250 rpm
2009-2011
160 kW (215 bhp)
at 6,100 rpm
270 N⋅m (199 lb⋅ft)
at 2,400-4,200 rpm
2007-2013
190 kW (255 bhp)
at 6,600 rpm
310 N⋅m (229 lb⋅ft)
at 2,600-5,000 rpm
2009-2011
200 kW (268 bhp)
at 6,700 rpm
320 N⋅m (236 lb⋅ft)
at 2,750-3,000 rpm
2007-2013

N53B25

The 2.5 L (153 cu in) version of the N53 produces 140 kW (188 bhp) and 235 N⋅m (173 lb⋅ft).[5] It has a bore of 82 mm (3.23 in) and a stroke of 78.8 mm (3.10 in).

Applications:[7]

N53B30 (150 kW)

A 150 kW (201 bhp) version of the N53 was used in the pre-facelift F10 523i.

Applications:[8]

N53B30 (160 kW)

This 3.0 L (183 cu in) version of the N53 produces 160 kW (215 bhp),[5] the same figure as the 2.5 L (153 cu in) version of its N52 predecessor. However, peak torque increased from 250 to 270 N⋅m (184 to 199 lb⋅ft).[9]

Applications:

N53B30 (190 kW)

A 190 kW (255 bhp) version of the N53 was used in the pre-facelift F10 528i.[10]

Applications:

N53B30 (200 kW)

The most powerful version of the N53 produces 200 kW (268 bhp) of power and 320 N⋅m (236 lb⋅ft) of torque.[5][11]

Applications:

High-Pressure Fuel Pump failures

The N53 uses the same High-Pressure Fuel Pump (HPFP) as the BMW N54 turbocharged straight-six engine,[12] which had HPFP failures leading to Lemon Law "buy backs" and legal action in the United States. The N53 engine was not sold in the United States, therefore the N53 engine was not involved with these actions.[13]

Failures of the N53 HPFP have been reported,[14] although it is not known whether failure in the N53 is as common as the N54.

See also

References

  1. "BMW's N52 versus N53 - what are we missing?". paultan.org.
  2. "Metric.or.kr" (PDF). Archived from the original (PDF) on 2019-09-29. Retrieved 2012-08-05.
  3. 1 2 "BMW N53B25 Engine". www.mywikimotors.com. Retrieved 24 November 2017.
  4. "BMW Straight 6 Engine - N Series". BMWInformation.com. Archived from the original on 21 April 2008.
  5. 1 2 3 4 "Engine specifications for N53 engines". www.bmwheaven.com.
  6. "6' E63 LCI 630i Ignition coil/spark plug". www.realoem.com. Retrieved 30 November 2017.
  7. "BMW Engine Codes". racingdynamics.com.
  8. "2009 BMW 523i F10 Specifications". www.carfolio.com. Retrieved 30 November 2017.
  9. "BMW E60 5 Series 525i Specs". www.ultimatespecs.com. Retrieved 30 November 2017.
  10. "2010 BMW 528i (model since mid-year 2010 for Europe ) specs review". www.automobile-catalog.com. Retrieved 30 November 2017.
  11. "2007 BMW 630i Coupé specifications". www.carfolio.com. Retrieved 30 November 2017.
  12. "13517616170 Exch high-pressure pump". www.realoem.com. Retrieved 28 November 2017.
  13. "What's the deal with all these Lemon/Buyback 335i's?". www.bimmerfest.com.
  14. "BMW N53B25 Engine". www.mywikimotors.com. Retrieved 28 November 2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.