Bobcat Fire
Bobcat Fire viewed from Monrovia, California
Location	Angeles National Forest, California
Coordinates	34°14′28″N 117°52′05″W / 34.241°N 117.868°W / 34.241; -117.868[1]
Statistics[1]
Total area	115,997 acres (46,942 ha)
Cost	$100 million (cost of suppression)
Date(s)	September 6– November 30, 2020
Cause	Tree contacting power lines
Buildings destroyed	169
Map
Progression map of the Bobcat Fire, dated September 28, 2020
Location of the Bobcat Fire in Southern California

The Bobcat Fire was a large wildfire in Los Angeles County and one of the major incidents of the 2020 California wildfire season. The fire ignited on September 6, 2020, and burned 115,997 acres (46,942 ha) before it was fully contained by November 27. The Bobcat Fire primarily burned in the central San Gabriel Mountains, in and around the Angeles National Forest, and is one of the largest fires on record in Los Angeles County to date.^[2]

Background

Most of the Bobcat Fire's footprint had no recent burn history, reaching back 50 years before the fire.^[3] Some areas had not burned in over 80 years.^[4]

Days before the fire began, a heat wave developed in the area. High temperatures surpassed 100 degrees, relative humidity levels fell below 15%, and vegetation moistures hovered around critical levels.^[5] The National Weather Service in Los Angeles and Oxnard issued a red flag warning beginning 6:00 p.m. on September 6 through 10:00 p.m. the following day. The warning highlighted the potential for large wildfires to spread rapidly upon ignition:^[6]

Strong high pressure will bring a dangerous heat wave and low humidities to Southwest California through at least Labor Day. The very hot and unstable conditions will bring a significant threat of large plume dominated fires during this time.

— National Weather Service Los Angeles/Oxnard CA, Fire Weather Message, 10:05 AM PDT Sat Sep 5 2020

Incident meteorologist Rich Thompson compared the Bobcat Fire's spread to that of the 2009 Station Fire, ascribing the fire's growth to "hot and dry conditions, combined with typical summertime terrain-driven winds", as opposed to Santa Ana winds, which have driven other large and destructive wildfires in the region.^[5]

Progression

The fire triggered mandatory evacuation orders in parts of Arcadia and Camp Williams.^{[7][8][9][10]}

The fire initially spread southward which prompted evacuation orders for residents in Sierra Madre, Monrovia, Bradbury, and Duarte, along with evacuation warnings for those in Arcadia, Pasadena, and Altadena. The fire then grew westward and threatened the Mount Wilson Observatory by September 15, approaching within 500 feet (152 m) of the observatory as firefighters worked to protect the structure.^[11][12][13] By September 17, the fire rapidly expanded to the north into Pleasant View Ridge Wilderness due to moderate coastal winds, leading to mandatory evacuations in Antelope Valley as the fire approached Juniper Hills. Containment difficulties were exacerbated by very dry vegetation and rugged topography that made it difficult to access.

The fire was declared fully contained on November 27.^[14]: 12 The effort to contain the Bobcat Fire cost $100 million, according to the National Interagency Coordination Center.^[15]: 7

Effects

The Bobcat Fire destroyed 169 structures and damaged a further 47.^[14]: 12

Along with the El Dorado Fire, the fire contributed to hazardous air pollution in the Los Angeles region.^[16]

The blaze burned over 180 square miles (460 square kilometers); this makes it the second-largest wildfire recorded in modern times in Los Angeles County, behind the 2009 Station Fire and surpassing the 1970 Clampitt Fire.^[17][18] Air quality was poor in the burned areas and in the Los Angeles basin for weeks as a result.^[19]

In the San Gabriel Mountains, several types of wildlife and aquatic creatures such as fish, frogs and western pond turtles face extinction as a result of the fires. The area of Little Rock Creek contains much of these aquatic life. Biologists and wildlife organizations were considering rescue operations.^[20]

After the fires, some home owners were having trouble finding home insurance as some insurers pulled out of certain zip codes or even certain counties. Most remaining insurers have raised prices.^[21] The CA State Department of Insurance banned insurers from cancelling insurance policies or declining renewals for one year after the fires.^[22]

Cause

On September 15, 2020, Southern California Edison notified the California Public Utilities Commission that its equipment had detected an anomaly on one of its circuits five minutes before the Bobcat Fire was first reported, though the utility contended that this was after smoke had first been seen from the fire on cameras. Several weeks later, Southern California Edison filed a supplementary letter stating that tree branches may have come into contact with the utility's powerlines and begun the fire. U.S. Forest Service investigators took items from the scene into custody, including a section of conductor line, power poles, and several tree branches.^[23][24] The Forest Service later concluded that a tree had in fact contacted the power lines, catching aflame and starting the Bobcat Fire.^[25]

In September 2023, the federal government sued Southern California Edison and Utility Tree Service, a contractor for the utility. The lawsuit accuses the two of not adequately maintaining the tree that came into contact with the Southern California Edison powerlines. The federal government is seeking more than $121 million in recompense for the cost of fire suppression and damage.^[25]

Gallery

• 
  The Bobcat Fire burning at night on Sept 19
• 
  Bobcat Fire 20 minutes after its ignition, above Azusa, CA, Sept. 6, 2020

References