Edward Butler (1862–1940) was an English inventor who produced an early three-wheeled petrol automobile called the Butler Petrol Cycle, which is accepted by many as the first British car.
Butler first showed plans for a three-wheeled petrol vehicle at the Stanley Cycle Show in London in 1884, and again at the 1885 Inventions Exhibition, also in London.
For comparison, Carl Benz, who is generally recognised as the inventor of the modern automobile, built his first working motorcar in 1885, and unveiled it to the public in 1886.
Butler Petrol Cycle
Built by the Merryweather Fire Engine company in Greenwich, in 1888,[1] the Butler Petrol Cycle (first recorded use of the term)[2] was a three-wheeled petrol vehicle. The rear wheel was directly driven by a 5/8hp (466W) 600 cc (40 in3; 2¼×5-inch {57×127-mm})[2] flat twin four-stroke engine (with magneto ignition replaced by coil and battery),[2] equipped with rotary valves and a float-fed carburettor (five years before Maybach),[2] and Ackermann steering,[3] all of which were state of the art at the time. The engine was liquid-cooled, with a radiator over the rear driving wheel. Speed was controlled by means of a throttle valve lever. The driver was seated between the front wheels.[2]
The vehicle featured in an article in the 14 February 1891 issue of Scientific American, where it was stated that one gallon of fuel in the form of petroleum or benzolene could propel the vehicle for forty miles (5.9 L/100 km) at a speed of 3–10 mph (4.8–16.1 km/h).[4]
Butler improved the specifications of his vehicle over the years, but was prevented from adequately testing it due to the Locomotives Act 1865 (the Red Flag Act), which legislated a maximum speed for self-propelled road vehicles of 2 mph (3.2 km/h) in built up areas and 4 mph (6.4 km/h) in rural areas. Additionally, the vehicle had to be attended by three people, one of whom had to proceed in front of the vehicle waving a red flag.
Butler wrote in the magazine The English Mechanic in 1890, "The authorities do not countenance its use on the roads, and I have abandoned in consequence any further development of it."[4]
Due to general lack of interest, Butler broke up his machine for scrap in 1896, and sold the patent rights to Harry J. Lawson who continued manufacture of the engine for use in motorboats.[4]
Instead, Butler turned to making stationary and marine engines.[2] His motor tricycle was in advance of its better-known contemporaries on several points.[2]
See also
References
- ↑ G.N. Georgano Cars: Early and Vintage 1886–1930 (London: Grange-Universal, 1990), p.22.
- 1 2 3 4 5 6 7 G.N. Georgano, p.22.
- ↑ G.N. Georgano, p.20 cap.
- 1 2 3 Aiken, Ken. "Edward Butler and the Petrol Cycle". TouringRoads Travel and Adventure. Retrieved 7 September 2020.
Other sources
- "Keeping track: All fired up about `petrol'", The Daily Telegraph, Sunday Telegraph, 1 February 2002, archived from the original on 31 October 2007
- G.N. Georgano Cars: Early and Vintage 1886–1930. London: Grange-Universal, 1990 (reprints AB Nordbok 1985 edition). ISBN 0-9509620-3-1.