Catasauqua Branch
Overview
Owner
Termini
History
Opened1 April 1914 (1914-04-01)
Closedc.1990s
Technical
Line length6.31 mi (10.15 km)
Track gauge1,435 mm (4 ft 8+12 in) standard gauge
Route map

mi
Cement Secondary
8.4
Crane Junction
Cement Secondary
11.1
Schoenersville
Catasauqua Tunnel
14.5
Catasauqua
CNJ main line
LVRR main line
Biery Yard
C&F branch

The Catasauqua Branch was a short railway line in Lehigh and Northampton Counties in the state of Pennsylvania. It was part of the Lehigh and New England Railroad and ran from a point south of Bath to Catasauqua, where it interchanged with the Central Railroad of New Jersey and Lehigh Valley Railroad. The line opened in 1914 and was partially abandoned in 1961 on the Lehigh and New England Railroad's bankruptcy and closure. Conrail abandoned the remainder in the 1990s.

History

The history of the Catasauqua Branch begins with the Lehigh Crane Iron Company, whose first furnace began operating in Catasauqua in 1840. The company owned railroad trackage surrounding its facilities, including a bridge across the Lehigh River to West Catasauqua, where it interchanged with the Catasauqua and Fogelsville Railroad (later part of the Reading Company system) and the Lehigh Valley Railroad. The company also interchanged with the Lehigh and Susquehanna Railroad (later part of the Central Railroad of New Jersey) on the east bank of the Lehigh after the L&S's completion in 1867.[1]

The Empire Steel and Iron Company acquired Crane in 1899, and in 1905 created the Crane Railroad to operate the industrial trackage in Catasauqua. Between 1911 and 1912, the Crane Railroad constructed a spur east from Catasauqua a slag dump in Kurtz' Valley; this line included a 735 feet (224 m) tunnel.[2] The Lehigh and New England Railroad (L&NE), whose Bethlehem Branch ran north–south approximately 6 miles (9.7 km) east of Catasauqua, constructed a 5.43-mile (8.74 km) connection from that branch to the eastern end of the Crane Railroad's tracks. This extension was completed on April 1, 1914, and the L&NE acquired the Crane Railroad on September 23, 1914. The line was thereafter known as the Catasauqua Branch.[3]

The post-World War II decline in coal traffic and the shift of cement haulage from trains to trucks led to the L&NE abandoning operations on October 31, 1961.[4] The Central Railroad of New Jersey established the Lehigh and New England Railway to acquire some of the L&NE's lines, including 4.4 miles (7.1 km) of the Catasauqua Branch. The remainder, from Catasauqua to Schoenersville, was abandoned. This remaining section of the line served a new industrial park in Schoenersville.[5]

The Lehigh and New England Railway suffered from cash-flow problems in the 1970s and was one of many Northeastern railroads included in Conrail in 1976.[6] The Catasauqua Branch was one of the lines transferred to Conrail.[7] Conrail called the line the Schoenersville Industrial Track.[8] The remaining line was out of service by 1991 and has since been abandoned.[9]

Notes

  1. Kulp (1972), pp. 51–52.
  2. Kulp (1972), p. 53.
  3. Kulp (1972), p. 51.
  4. Kulp (1972), pp. 83–84.
  5. Kulp (1972), p. 93.
  6. Airgood, Glenn (March 27, 1976). "ConRail can deliver the goods, plus red tape". The Morning Call. p. 3. Retrieved March 4, 2023 via Newspapers.com.
  7. USRA (1975), p. 24.
  8. Conrail (November 1986). "Allentown–Bethlehem & Easton, PA and vicinity: railroads & industries" (PDF). Retrieved March 4, 2023.
  9. PennDOT (1991). "General Highway Map: Lehigh County, Pennsylvania" (PDF). Retrieved March 4, 2023.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.