DB Class 65
DB Class 65
Type and origin Builder Krauss-Maffei Build date 1951–1956 Total produced 18
Specifications Configuration: ​  • Whyte 2-8-4T  • UIC 1′D2′ h2t Leading dia. 850 mm (2 ft 9+1⁄2 in) Driver dia. 1,500 mm (4 ft 11 in) Trailing dia. 850 mm (2 ft 9+1⁄2 in) Length: ​  • Over beams 15,475 mm (50 ft 9+1⁄4 in) Axle load 16.9 tonnes (16.6 long tons; 18.6 short tons) Adhesive weight 67.6 tonnes (66.5 long tons; 74.5 short tons) Service weight 107.6 tonnes (105.9 long tons; 118.6 short tons) Fuel capacity Coal: 4.8 tonnes (4.7 long tons; 5.3 short tons) Water cap. 14.3 m3 (500 cu ft) or 14,300 litres (3,100 imp gal; 3,800 US gal) Boiler pressure 14 bar (1.40 MPa; 203 psi) Heating surface: ​  • Firebox 2.67 m2 (28.7 sq ft)  • Evaporative 139.93 m2 (1,506.2 sq ft) Superheater: ​  • Heating area 62.90 m2 (677.0 sq ft) Cylinders Two Cylinder size 660 mm (26 in) Piston stroke 570 mm (22+7⁄16 in) Loco brake Knorr brake
Performance figures Maximum speed 85 km/h (53 mph) Indicated power 1,089 kW (1,481 PS; 1,460 hp)
Career Numbers DB 65 001–018 Retired 1966ff.

The steam locomotives of DB Class 65 were newly designed, German, passenger train tank locomotives, built for the Deutsche Bundesbahn after the Second World War. They were intended for suburban and commuter trains serving German cities, where they were to replace Classes 78 and 93.5. As a result, they were allocated to the locomotive depots (Bahnbetriebswerke or BW) at Darmstadt, Düsseldorf and Letmathe. Between Düsseldorf and Essen they were even used on early S-Bahn services. And between Limburg/Lahn and Wiesbaden and in the area of Darmstadt they also hauled goods trains.

The firm of Krauss-Maffei initially delivered 13 engines in 1951 and a further 5 from 1955 to 1956. The first engine, with operating number 65 001, was retired as early as 1966.

All the vehicles were given a welded, high-performance boiler. Operating numbers 65 001 - 65 013 were equipped with a surface economizer. Numbers 65 014 - 65 018 were given a mixer preheater. Numbers 65 012 - 65 018 were equipped for push-pull services. So there were three different variants of these two-cylinder, superheated steam engines in service with the Bundesbahn.

DB Neubaulok 065 005-1 ready for scrapping, Frankfurt-am-Main, 1970

Class 65 locomotives proved to be exceptionally reliable engines, but they could not be used universally, because their coal bunkers and water tanks were small. As a result, they could only be used for short-range goods traffic.

Locomotive 65 018 was given a special lightweight drive, which was later used on all the engines. This locomotive is the only representative of its class to have survived in working order and is owned by the Stoom Stichting Nederland society in the Netherlands, having been donated by a German railway museum in 1981. It was retired from Bw Aschaffenburg in 1972, the last one of these attractive locomotives to be paid off.

See also

• Neubaulok
• DR Class 65.10

References

• Hütter, Ingo (2021). Die Dampflokomotiven der Baureihen 60 bis 91 der DRG, DRB, DB, und DR (in German). Werl: DGEG Medien. pp. 36–38. ISBN 978-3-946594-21-5.
• Weisbrod, Manfred; Müller, Hans; Petznik, Wolfgang (1978). Dampflokomotiven deutscher Eisenbahnen, Baureihe 60–96 (EFA 1.3) (in German) (4th ed.). Düsseldorf: Alba. pp. 25–27. ISBN 3-87094-083-2.

Wikimedia Commons has media related to DB Class 65.