Direct linear transformation (DLT) is an algorithm which solves a set of variables from a set of similarity relations:

  for

where and are known vectors, denotes equality up to an unknown scalar multiplication, and is a matrix (or linear transformation) which contains the unknowns to be solved.

This type of relation appears frequently in projective geometry. Practical examples include the relation between 3D points in a scene and their projection onto the image plane of a pinhole camera,[1] and homographies.

Introduction

An ordinary system of linear equations

  for

can be solved, for example, by rewriting it as a matrix equation where matrices and contain the vectors and in their respective columns. Given that there exists a unique solution, it is given by

Solutions can also be described in the case that the equations are over or under determined.

What makes the direct linear transformation problem distinct from the above standard case is the fact that the left and right sides of the defining equation can differ by an unknown multiplicative factor which is dependent on k. As a consequence, cannot be computed as in the standard case. Instead, the similarity relations are rewritten as proper linear homogeneous equations which then can be solved by a standard method. The combination of rewriting the similarity equations as homogeneous linear equations and solving them by standard methods is referred to as a direct linear transformation algorithm or DLT algorithm. DLT is attributed to Ivan Sutherland. [2]

Example

Suppose that . Let and be two known vectors, and we want to find the matrix such that

where is the unknown scalar factor related to equation k.

To get rid of the unknown scalars and obtain homogeneous equations, define the anti-symmetric matrix

and multiply both sides of the equation with from the left

Since the following homogeneous equations, which no longer contain the unknown scalars, are at hand

In order to solve from this set of equations, consider the elements of the vectors and and matrix :

,   ,   and  

and the above homogeneous equation becomes

  for

This can also be written in the matrix form:

  for

where and both are 6-dimensional vectors defined as

  and  

So far, we have 1 equation and 6 unknowns. A set of homogeneous equations can be written in the matrix form

where is a matrix which holds the known vectors in its rows. The unknown can be determined, for example, by a singular value decomposition of ; is a right singular vector of corresponding to a singular value that equals zero. Once has been determined, the elements of matrix Failed to parse (SVG (MathML can be enabled via browser plugin): Invalid response ("Math extension cannot connect to Restbase.") from server "http://localhost:6011/en.wikipedia.org/v1/":): \mathbf {A} can rearranged from vector . Notice that the scaling of or is not important (except that it must be non-zero) since the defining equations already allow for unknown scaling.

In practice the vectors and may contain noise which means that the similarity equations are only approximately valid. As a consequence, there may not be a vector which solves the homogeneous equation exactly. In these cases, a total least squares solution can be used by choosing as a right singular vector corresponding to the smallest singular value of

More general cases

The above example has and , but the general strategy for rewriting the similarity relations into homogeneous linear equations can be generalized to arbitrary dimensions for both and

If and the previous expressions can still lead to an equation

  for  

where now is Each k provides one equation in the unknown elements of and together these equations can be written for the known matrix and unknown 2q-dimensional vector This vector can be found in a similar way as before.

In the most general case and . The main difference compared to previously is that the matrix now is and anti-symmetric. When the space of such matrices is no longer one-dimensional, it is of dimension

This means that each value of k provides M homogeneous equations of the type

  for     and for

where is a M-dimensional basis of the space of anti-symmetric matrices.

Example p = 3

In the case that p = 3 the following three matrices can be chosen

,   ,  

In this particular case, the homogeneous linear equations can be written as

  for  

where is the matrix representation of the vector cross product. Notice that this last equation is vector valued; the left hand side is the zero element in .

Each value of k provides three homogeneous linear equations in the unknown elements of . However, since has rank = 2, at most two equations are linearly independent. In practice, therefore, it is common to only use two of the three matrices , for example, for m=1, 2. However, the linear dependency between the equations is dependent on , which means that in unlucky cases it would have been better to choose, for example, m=2,3. As a consequence, if the number of equations is not a concern, it may be better to use all three equations when the matrix is constructed.

The linear dependence between the resulting homogeneous linear equations is a general concern for the case p > 2 and has to be dealt with either by reducing the set of anti-symmetric matrices or by allowing to become larger than necessary for determining

References

  1. Abdel-Aziz, Y.I.; Karara, H.M. (2015-02-01). "Direct Linear Transformation from Comparator Coordinates into Object Space Coordinates in Close-Range Photogrammetry". Photogrammetric Engineering & Remote Sensing. American Society for Photogrammetry and Remote Sensing. 81 (2): 103–107. doi:10.14358/pers.81.2.103. ISSN 0099-1112.
  2. Sutherland, Ivan E. (April 1974), "Three-dimensional data input by tablet", Proceedings of the IEEE, 62 (4): 453–461, doi:10.1109/PROC.1974.9449
  • Richard Hartley and Andrew Zisserman (2003). Multiple View Geometry in computer vision. Cambridge University Press. ISBN 978-0-521-54051-3.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.