DyNet is the communications network and communications protocol for Dynalite lighting automation and building automation. It is now part of Philips Lighting.

Design

The network runs on a 4-twisted-pair cable of 100Ω 100 MHz CAT5E [1] or a flat cable with RS485 serial port, usually with a RJ-12 connector. A daisy-chain serial network topology is strongly recommended with no stubs. The recommended[1] cable colour-coding is:

Green/White pair = paralleled for GND

Orange/White pair = paralleled for +12V

Blue/White pair = blue for DATA+ and white for DATA-

Brown/White pair = spare or shield if unshielded cable is used.

References

  1. "Search". Philips. Retrieved 2017-02-27.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.