In fluid mechanics, fluid flow through porous media is the manner in which fluids behave when flowing through a porous medium, for example sponge or wood, or when filtering water using sand or another porous material. As commonly observed, some fluid flows through the media while some mass of the fluid is stored in the pores present in the media.

Classical flow mechanics in porous media assumes that the medium is homogenous, isotropic, and has an intergranular pore structure. It also assumes that the fluid is a Newtonian fluid, that the reservoir is isothermal, that the well is vertical, etc. Traditional flow issues in porous media often involve single-phase steady state flow, multi-well interference, oil-water two-phase flow, natural gas flow, elastic energy driven flow, oil-gas two-phase flow, and gas-water two-phase flow.^[1]

The physicochemical flow process will involve various physical property changes and chemical reactions in contrast to the basic Newtonian fluid in the classical flow theory of porous system. Viscosity, surface tension, phase state, concentration, temperature, and other physical characteristics are examples of these properties. Non-Newtonian fluid flow, mass transfer through diffusion, and multiphase and multicomponent fluid flow are the primary flow issues.^[2]

Governing laws

The movement of a fluid through porous media is described by the combination of Darcy's law with the principle of conservation of mass in order to express the capillary force or fluid velocity as a function of various other parameters including the effective pore radius, liquid viscosity or permeability.^[3] However, the use of Darcy's law alone does not produce accurate results for heterogeneous media like shale, and tight sandstones, where there is a huge proportion of nanopores. This necessitates the use of a flow model that considers the weighted proportion of various flow regimes like Darcy flow, transition flow, slip flow, and free molecular flow.^[4]

Darcy's law

Symbol	Description
${\displaystyle Q}$	Volumetric flow rate [m3/s]
${\displaystyle k}$	Permeability of porous medium [m2]. The permeability is a function of material type, and also varies with stress, temperature, etc.
${\displaystyle \mu }$	Fluid viscosity [Pa.s]
${\displaystyle A}$	Cross-sectional area of Porous medium [m2]
${\displaystyle (p_{b}-p_{a})}$	Pressure drop across medium [Pa]
${\displaystyle L}$	Length of sample [m]

The basic law governing the flow of fluids through porous media is Darcy's Law, which was formulated by the French civil engineer Henry Darcy in 1856 on the basis of his experiments on vertical water filtration through sand beds.^[5]

According to Darcy's law, the fluid's viscosity, effective fluid permeability, and fluid pressure gradient determine the flow rate at any given location in the reservoir.^[6]

${\displaystyle Q={\frac {-kA}{\mu }}{\frac {(p_{b}-p_{a})}{L}}}$

For transient processes in which the flux varies from point to-point, the following differential form of Darcy’s law is used.

${\displaystyle Q={\frac {-kA}{\mu }}\left({\frac {dp}{dx}}\right)}$

Darcy's law is valid for situation where the porous material is already saturated with the fluid. For the calculation of capillary imbibition speed of a liquid to an initially dry medium, Washburn's or Bosanquet's equations are used.

Diffusion Equation

Using product rule(and chain rule) on right hand side of the above mass conservation equation (i),

${\displaystyle {\frac {d(\rho \phi )}{dt}}=\rho {\frac {d\phi }{dt}}+\phi {\frac {d\rho }{dt}}=\rho {\frac {d\phi }{dP}}{\frac {dP}{dt}}+\phi {\frac {d\rho }{dP}}{\frac {dP}{dt}}=\rho \phi \left[{\frac {1}{\phi }}{\frac {d\phi }{dP}}+{\frac {1}{\rho }}{\frac {d\rho }{dP}}\right]\quad {\frac {dP}{dt}}=\rho \phi [c_{\phi }+c_{f}]{\frac {dP}{dt}}~~~~(ii)}$

Here, ${\displaystyle c_{f}}$ = compressibility of the fluid and ${\displaystyle c_{\phi }}$ = compressibility of porous medium.^[9] Now considering the left hand side of the mass conservation equation, which is given by Darcy's Law as

${\displaystyle {\frac {-d(\rho q)}{dx}}={\frac {-d}{dx}}\left[{\frac {-\rho k}{\mu }}{\frac {dP}{dx}}\right]\quad ={\frac {k}{\mu }}\left[\rho {\frac {d^{2}P}{dx^{2}}}+{\frac {d\rho }{dP}}{\frac {dP}{dx}}{\frac {dP}{dx}}\right]\quad ={\frac {\rho k}{\mu }}\left[{\frac {d^{2}P}{dx^{2}}}+\left({\frac {1}{\rho }}{\frac {d\rho }{dP}}\right)\left({\frac {dP}{dx}}\right)^{2}\right]\quad ={\frac {\rho k}{\mu }}\left[{\frac {d^{2}P}{dx^{2}}}+c_{f}\left({\frac {dP}{dx}}\right)^{2}\right]\quad ~~~~(iii)}$

Equating the results obtained in ${\displaystyle (ii)}$ & ${\displaystyle (iii)}$, we get

${\displaystyle {\frac {d^{2}P}{dx^{2}}}+c_{f}\left({\frac {dP}{dx}}\right)^{2}={\frac {\phi \mu (c_{f}+c_{\phi })}{k}}{\frac {dP}{dt}}}$

The second term on the left side is usually negligible, and we obtain the diffusion equation in 1 dimension as

${\displaystyle {\frac {dP}{dt}}={\frac {k}{\phi \mu c_{t}}}{\frac {d^{2}P}{dx^{2}}}}$

where ${\displaystyle c_{t}=c_{f}+c_{\phi }}$.^[10]

References

Further reading

• Acheson, D. J. (1990). Elementary Fluid Dynamics. Clarendon Press. ISBN 0-19-859679-0.
• Lamb, Horace (1994). Hydrodynamics (6th ed.). Cambridge University Press. ISBN 0-521-45868-4. Originally published in 1879, the 6th extended edition appeared first in 1932.
• Milne-Thompson, L. M. (1968). Theoretical Hydrodynamics (5th ed.). Macmillan. Originally published in 1938.
• Shinbrot, M. (1973). Lectures on Fluid Mechanics. Gordon and Breach. ISBN 0-677-01710-3.
• Chanson, H. (2009). Applied Hydrodynamics: An Introduction to Ideal and Real Fluid Flows. CRC Press, Taylor & Francis Group, Leiden, The Netherlands, 478 pages. ISBN 978-0-415-49271-3.
• Clancy, L. J. (1975). Aerodynamics. London: Pitman Publishing Limited. ISBN 0-273-01120-0.
• Nazarenko, Sergey (2014), Fluid Dynamics via Examples and Solutions, CRC Press (Taylor & Francis group), ISBN 978-1-43-988882-7

External links

• Fundamentals of Fluid Flow in Porous Media
• Geology Buzz: Porosity
• Defining Permeability
• Tailoring porous media to control permeability
• Permeability of Porous Media
• Graphical depiction of different flow rates through materials of differing permeability