Chassis

The first-generation Bronco is built upon a chassis developed specifically for the model range, shared with no other Ford or Lincoln-Mercury vehicle. Built on a 92-inch wheelbase (sized between the CJ-5 and Scout; only an inch shorter than the later CJ-7), the Bronco used box-section body-on-frame construction.

To simplify production, all examples were sold with four-wheel drive; a shift-on the-fly Dana 20 transfer case and locking hubs were standard.^[11] The rear axle was a Ford 9-inch axle, with Hotchkiss drive and leaf springs; the front axle was a Dana 30, replaced by a Dana 44 in 1971.^[11] In contrast to the Twin I-Beams of larger Ford trucks, the Bronco used radius arms to locate the coil-sprung front axle, along with a lateral track bar, allowing for a 34-foot turning circle, long wheel travel, and antidive geometry (useful for snowplowing). A heavier-duty suspension system was an option, along with air front springs.^[11]

Body design

In a central theme of the first-generation Bronco, styling was subordinated to simplicity and economy, so all glass was flat, bumpers were straight C-sections, and the left and right door skins were symmetrical (prior to the fitment of door-mounting hardware).

For 1966, three Bronco body configurations were offered, including a two-door wagon, a half-cab pickup, and an open-body roadster.^[11] With a base price of $2,194 ($20,055 in 2022 dollars), the Bronco included few amenities as standard. However, a large number of options were offered through both Ford and its dealers, including front bucket seats, a rear bench seat, a tachometer, and a CB radio, as well as functional items such as a tow bar, an auxiliary gas tank, a power take-off, a snowplow, a winch, and a posthole digger.^[11] Aftermarket accessories included campers, overdrive units, and the usual array of wheels, tires, chassis, and engine parts for increased performance.

For 1967, Ford introduced the Sport option package for the Bronco wagon. Consisting primarily of chrome exterior trim and wheel covers, the Sport package was distinguished by red-painted "FORD" grille lettering.^[11] For 1970, the Bronco Sport became a freestanding model rather than an option package.^[11]

To comply with federal regulations, the Bronco was fitted with back-up lights and side marker lamps in 1967 and 1968, respectively. After struggling with sales, the open-body Bronco roadster was withdrawn after the 1968 model year.^[11]

After 1972, the Bronco half-cab was withdrawn; along with its lower sales compared to the wagon, Ford had introduced the larger Ford Courier compact pickup.

In a minor revision, for 1977, the exterior-mounted fuel tank caps were replaced behind hinged doors (as on all other Ford trucks).^[11]

• 1966-1977 Ford Bronco body styles
• 
  1966 Bronco roadster
• 
  1966 Bronco roadster, left side
• 
  1966 Bronco roadster, right side
• 
  1966 Bronco roadster, rear
• 
  1966 Bronco roadster instrument panel
• 
  1972–1976 Bronco Ranger wagon
• 
  1972–1976 Bronco Ranger wagon, rear
• 
  1966–1967 Bronco pickup
• 
  1966–1967 Bronco pickup interior

Trim

Initially offered as a single trim level with a long option list, for 1967, Ford introduced the Sport option package for the Bronco wagon. Consisting primarily of chrome exterior trim and wheelcovers, the Sport package was distinguished by red-painted FORD grille lettering.^[11] For 1970, the Bronco Sport became a freestanding model rather than an option package.^[11]

For 1972, in line with the F-Series trucks, the Ranger trim became the top-of-the-line Bronco, offering body stripes, model-specific wheel covers, cloth seats, woodgrain door panels, and carpeted interior.^[11]

In a 1975 interior revision, the Bronco Sport and Bronco Ranger adapted the two-spoke steering wheel from the F-Series.^[11]

The optional full wheel covers on all first generation Broncos were the same ones used on the 1966 Galaxie.

Sales

Racing

In 1965, race car builder Bill Stroppe assembled a team of Broncos for long-distance off-road competition. Partnering with Holman-Moody, the Stroppe/Holman/Moody (SHM) Broncos competed in the Mint 400, Baja 500, and Mexican 1000 (later named the Baja 1000). In 1969, SHM again entered a team of six Broncos in the Baja 1000. In 1971, a "Baja Bronco" package was marketed through Ford dealers, featuring quick-ratio power steering, automatic transmission, fender flares covering Gates Commando tires, a roll bar, reinforced bumpers, a padded steering wheel, and distinctive red, white, blue, and black paint. Priced at US$5,566, versus the standard V8 Bronco price of $3,665, only 650 were sold over the next four years.^[12]

In 1966, a Bronco "funny car" built by Doug Nash for the quarter-mile dragstrip finished with a few low 8-second times, but it was sidelined by sanctioning organizations when pickups and aluminum frames were outlawed.^[13]

Chassis

The second generation Bronco is based on the Ford F-100 pickup truck chassis (1973–1979 sixth generation). Approximately one foot shorter than the shortest F-100, the Bronco has a 104-inch wheelbase (12 inches longer than the previous Bronco). The second generation Bronco is still fitted exclusively with four-wheel drive;^[17] a part-time system was standard with a New Process 205 gear-driven transfer case with the option of permanent four-wheel drive and a New Process 203 chain-driven transfer case.

The second generation Bronco has a coil-sprung Dana 44 front axle and a leaf-sprung rear Ford 9-inch axle (similar to the later first generation Broncos). The first and second generation Broncos both have non-independent front suspension (solid front axle). Third generation and later have the Ford/Dana twin traction beam independent front suspension system. These were also later used in the Ford Transit 4x4 range.

Two different V8 engines were offered for the second generation Bronco: the 5.8L 351M and the 6.6L 400. While offering virtually the same horsepower output, the 400 produced a higher torque output over the 351M. As the 460 V8 was restricted to rear-wheel drive F-Series trucks, it was not offered in the Bronco.

For 1979, Ford added emissions controls to its light-truck engines; the Bronco gained a catalytic converter (among other equipment) in both engine configurations.^[16][18]

Body

Replacing the multiple body configurations of the first generation, the second-generation Bronco was offered solely as a 3-door wagon with a lift-off rear hardtop. During its development as Project Shorthorn, a central requirement by Ford was to adopt bodywork from the F-100 with minimal modification.^[16] As with its chassis, the second-generation Bronco derives much of its body from the F-Series truck line, sharing the doors, front roofline and sheetmetal, and interior with the F-Series.^[19]

Retaining the wagon body from its predecessor, Ford designers shifted from a full-length hardtop (as with the previous Bronco and on the Jeep CJ-7) to a lift-off hardtop from behind the B-pillars. Designed by Dick Nesbitt, the configuration achieved higher commonality with the F-100 (sharing the doors and overhead roof stamping); attention was focused on minimizing leaks around the top seals (a problem related to the design of the K5 Blazer hardtop of the time).^[16] In a configuration similar to the Ford LTD Country Squire, the glass of the rear window rolled down into the tailgate (via a dash-mounted switch or from using the key on the outside), allowing the tailgate to fold down.

Coinciding with its commonality with the F-100, the second-generation Bronco introduced features new to the model line for the first time, including air conditioning, radio, and tilt steering.^[17][20] While a two-seat interior remained standard, the 11-inch wider interior allowed for a three-passenger front bench seat; with a folding and removable rear seat, the Bronco became a six-passenger vehicle for the first time.^[21][20]

For 1979, the Bronco saw little change from 1978 models. Along with the F-Series, rectangular headlamps (introduced on the Ranger trim for 1978) became standard on all Broncos. In an interior revision, captain's chair front seats became an option.^[16]

• 
  1978 Bronco Custom (aftermarket wheels/tires)
• 
  1978 Bronco Custom
• 
  1978 Bronco (aftermarket tires)
• 
  1979 Bronco Ranger XLT

Trim

For the second-generation Bronco, the model line adopted the same trim nomenclature as the F-Series.^[21] The Bronco Custom served as the standard-trim model with the Bronco Ranger XLT as the top-level trim. For 1978, as with the F-Series trucks, Customs were fitted with round headlamps while Ranger XLTs had rectangular units, which became standard for all Broncos for 1979.^[18]

During 1978 and 1979, alongside the Econoline, F-Series, and Courier, the Bronco was sold with a "Free-Wheelin'" cosmetic option package for both Custom and Ranger XLT trims. Featuring tricolor striping and blacked-out exterior trim, the package featured revised exterior striping for 1979.^[16]

Sales

Chassis

Again based on the Ford F-Series, the 1980–1986 Bronco is based upon the Ford F-150 (1980–1986 seventh generation). Although based on an all-new chassis, the Bronco retained its 104 in (2,642 mm) wheelbase. Ford engineers attempting to get as much fuel economy from weight reduction of 375 lb (170 kg) curb weight from the previous year, the 1980-81 models had a much weaker frame with holes stamped out at the factory.^[26] This extra lightened frame was dropped in 1982 for more strength and rigidity gaining 31 lb (14 kg) curb weight. Both transfer cases were replaced with a New Process 208 or Borg Warner 1345 version.^[18]

In front, the 1980–1986 Bronco is fitted with a Dana 44 front axle with Ford TTB (Twin Traction Beam) independent front suspension.^[18] As with the 1978–1979 Bronco, the rear axle was first a leaf-sprung Ford 9-inch axle in early models, however Ford transitioned all half ton trucks to their 8.8 rear axle by the end of 1986.^[18]

For the first time since 1977, the Bronco came with an inline-six engine as standard; the 4.9L 300 I6 was available solely with a manual transmission. The 400 V8 was discontinued, with the 351M taking its place and the 302 V8 making its return as the base-equipment V8.^[18] The 351 Windsor made its debut in the Bronco as it replaced the 351M in 1982; gaining a 210 hp "high-output" version in 1984.^[18][27] In 1985, the 5.0L V8 (302) saw its carburetor replaced by a multiport electronic fuel-injection system, rising to 190 hp (the standard 156 hp 5.8L V8 was discontinued for 1986).^[18]

Body

As with its 1978–1979 predecessor, the 1980–1986 Bronco shares much of its external sheetmetal with the F-Series pickup line, with the same parts from the doors forward. Based on a design proposal originally used in the development of the previous-generation Bronco, the B-pillar of the roofline was modified slightly to produce an improved seal for the hardtop.^[16] Prior to 1984, the hardtop included sliding window glass as an option.

For 1982, the Bronco saw a slight facelift as it adopted Ford's blue oval emblem, taking the place of "F-O-R-D" lettering on the hood,^[28] and the bronco horse was removed from the fender emblems.

Trim

The 1980–1986 Bronco adopted the same trim levels as the Ford F-Series pickups. Following the introduction of the Ford Ranger compact pickup, the Bronco adopted Bronco (base, replacing Custom), Bronco XL, and Bronco XLT.

In 1985, Ford added an Eddie Bauer trim package for the Bronco.^[28] Featuring a color-keyed two-tone exterior, the trim package featured an outdoors-themed interior.

Sales

Australian assembly

Outside of the US, the third generation Bronco was also assembled in Australia by Ford Australia, utilizing locally produced 4.1-litre six-cylinder and 5.8-litre V8 engines.^[23] It was marketed in Australia from March 1981 through to 1987.^[29]

Special editions

To commemorate 25 years of production, Ford offered a Silver Anniversary Edition Bronco for the 1991 model year. A cosmetic option package, the Silver Anniversary Edition featured Currant Red exterior paint (package exclusive) and a gray leather interior (the first time leather seating was available for a Bronco).^[28]

For 1991 through 1992, the Nite option package featured a completely blacked-out exterior with contrasting graphics. Alongside the top-line Eddie Bauer trim, both special editions were available only with a V8 engine and automatic transmission.

Sales

Model changes

1992–1996 Ford Bronco, rear view

The interior again saw updates to the dashboard and instrument panel, with the addition of leather front seats as an option for XLT and Eddie Bauer trims as well as optional remote keyless entry with an anti-theft alarm.^[34] Maroon and blue leather seats were offered from 1992 through the end of production. After having power windows and locks as an option throughout the 1980s, power mirrors were offered for the first time for 1992.^[28] For 1996, the Ford Bronco became the first Ford vehicle to incorporate turn signal lights into its side mirrors.^[28]

The fifth generation introduced additional changes related to safety. 4-wheel anti-lock braking system (ABS) replaced rear-wheel ABS for 1993, with a driver-side airbag introduced for 1994.^[28] The redesign included a safety front crumple zone into the frame ^[26] and a center-mounted brake light to the hardtop; the hardtop was now the mounting point of 3-point seatbelts for the rear passengers.

In the aftermath of the safety upgrades, the Bronco was no longer able to be marketed as a lift-off hardtop (from a legal standpoint). While still physically possible, the hardtop contained the upper mounts for the now required 3 point seatbelts and the required center brake light was mounted above the rear window on this hardtop (unlike Jeep mounting the 3rd brake light to the spare tire). To discourage owners from removing the hardtop, Ford removed all literature in the vehicle owner's manual related to its removal. To further inhibit its removal, Ford secured the hardtop in place with #40 Security Torx bolts, instead of the standard bolts used on previous model years. Removal of the hardtop could lead to a traffic citation, for tampering with the center brake light and/or inoperable rear seatbelts, depending on local and state laws.

Powertrain

The fifth-generation Bronco carried over the previous 4.9L inline-6, 5.0L V8, and the 5.8L H.O. V8 engines from the previous generation. For 1994, the Bronco became powered solely by V8 engines, as the 4.9L inline-6 was withdrawn from the model line.^[28] For 1996, the two V8 powertrains became OBD-II compliant.^[28]

Special editions

1995–1996 Ford Bronco Eddie Bauer

The monochrome Nite edition was again available, though 1992 was its last offering. Monochrome paint versions were reintroduced from 1993 (1994 model) to 1996, as the XLT Sport variant of the Bronco available in black, red, or white. Another variant of the XLT was a two-tone light teal green and white (charcoal gray interior); approximately 600 were produced each year.

The Eddie Bauer outdoors-themed edition made its return, offered from 1992 to 1996. Again combining nearly every option for the Bronco with a trim-specific exterior and interior combination, the Bronco Eddie Bauer introduced an overhead console for 1994 along with lighted sun visors and an auto-dimming rearview mirror (both offered as option on the XLT). For 1995, the Eddie Bauer saw the addition of front bumper vents (added to the XLT for 1996).

Sales

Discontinuation

1997 Ford Expedition XLT

The last fifth-generation Bronco built rolled off the Wayne, Michigan assembly line on June 12, 1996. According to Ford, the discontinuation of the model line was unrelated to any stigma created from the then-recent O.J. Simpson police chase, as sales of the model line had been in decline previous to the incident.^[35] To better compete with the Chevrolet/GMC Suburban and the Chevrolet Tahoe/GMC Yukon, Ford introduced the Ford Expedition for 1997 to replace the Bronco.

Following the lineage of the 1978-1996 Bronco, the Expedition was derived from the tenth-generation F-150, but shifted from a two-door body with a lift-off hardtop to a five-door wagon/SUV body, slotted above the Ranger-based Ford Explorer.

Centurion Classic (1987–1996)

A 1989 Centurion Classic; a Ford F-350 crew cab mated with rear bodywork of a Bronco

A four-door Ford competitor for the Chevrolet Tahoe was not released until the introduction of the Expedition for the 1997 model year (and the 2000 Excursion, competing against the ¾-ton version known as the Chevrolet Suburban 2500). As the Bronco was produced solely as a two-door wagon after 1972, all four-door Broncos were developed and produced on a license-built basis by the aftermarket.

During the 1980s and early 1990s, Centurion Vehicles, a converter specializing in Ford trucks based in White Pigeon, Michigan,^[36] constructed the Centurion Classic, a four-door version of the fourth- and fifth-generation Bronco. In the construction of each Classic, Centurion would mate the cab of an F-Series crew-cab pickup (from the C-pillar forward) to body of a Bronco (from the B-pillar rearward), including the rear quarter panels, hardtop, and tailgate of the SUV.^[37] Early models used fiberglass rear body panels, but later, these were made from steel.^[38] As the body conversion retained the rear seat of the Bronco, a Centurion Classic was equipped with three-row seating for up to nine people.^[36]

Centurion Vehicles offered two models of the Classic: the C-150 (based on the Ford F-150 chassis, with optional four-wheel drive) and the C-350 (based on the F-350, four-wheel drive was standard).^[36][37] Both models used a 140-inch wheelbase (9 inches longer than the Suburban^[36]); as the F-150 was not produced as a crew cab, a C-150 was constructed from three different vehicles (crew cab, Bronco rear, and F-150 frame). In contrast to the ¾-ton Suburban 2500, the C-350 Classic utilized a one-ton chassis. The C-150 was offered with 5.0L and 5.8L V8 engines; the C-350 used the 7.3L diesel V8 and 7.5L gasoline V8 (the only Bronco variants to use these engines).^[36]

The Centurion Classic was offered until the end of Bronco production in 1996; though the Bronco was directly replaced by the Expedition, the C-150/C-350 is closest in size to the Ford Excursion introduced for the 2000 model year.^[36][37] As of current production, the C-350 is the only SUV produced on a one-ton chassis (the 2000–2005 Ford Excursion was produced on a ¾-ton chassis).

O.J. Simpson chase

A white Ford Bronco XLT similar to the 1993 example in the OJ Simpson police pursuit

The Ford Bronco gained notoriety on June 17, 1994, when Al Cowlings drove his white 1993 Bronco XLT with his accused friend O.J. Simpson in the back seat, in a low-speed police chase on Interstate 405, ending in his eventual surrender.^[39] The incident was simulcast on television worldwide, with approximately 95 million Americans watching live.^[40]

Background

2021 Bronco 2-door Big Bend

2021 Bronco 4-door Outer Banks

The potential revival of the Bronco came up in 2016 negotiations between Ford and the UAW.^[50][51] At the time, it was discussed that Michigan Assembly would cancel production of the fourth-generation Ford Focus and the C-Max, which would move to Mexico.^[50] The UAW ultimately announced the factory would remain open, to be retooled for the revival of the Ford Ranger in North America and the Ford Bronco.^[50] The Bronco was developed as Ford expected the Ranger would not be enough to fill factory capacity, and needed a second model to be built alongside it.^[52]

While Ford did not share future product plans with the UAW, the company confirmed the return of the Bronco at the 2017 North American International Auto Show.^[4][53] Packaged as a direct competitor to the Jeep Wrangler, Ford announced two and four-door variants.^[54] Intended for a 2021 model year release, the sixth generation would be based on the Ford Ranger, retaining body-on-frame construction.^[54] In contrast to the Ford Everest sold overseas, the Bronco would receive a distinct body recalling the first generation with further off-road capability.^[54]

Ford showed a pre-production prototype to a group of dealers in March 2019.^[55] On November 1, 2019, an announcement was made for a spring 2020 reveal, intended for the 2021 model year.^[56] Originally scheduled for a March 2020 unveiling, the Bronco was unveiled on July 13, 2020, following multiple delays, mostly in relation to the global COVID-19 pandemic;^[57] Ford unintentionally scheduled the unveiling for July 9 (the date of O.J. Simpson's birthday^[58]). On March 27, 2021, at the Barrett-Jackson Scottsdale Auto Auction, the first production Bronco, a First Edition, sold for $1,075,000 (~$1.15 million in 2022) with all the funds going to a charity Ford helped establish to help preserve forests.^[59]

When the reveal officially premiered, Ford accepted $100 (~$108.00 in 2022) reservations, with production scheduled for 2021.^[60]

The first production units rolled off the assembly line, on Monday, June 14, 2021 at Michigan Assembly Plant in Wayne, Michigan, the production facility of the previous five generations.

The take rate for the seven-speed manual transmission was reported to be around 15% for the initial orders.^[61]

Specifications

Interior

The standard engine is a 2.3-liter turbocharged EcoBoost inline-four that makes 300 hp (304 PS; 224 kW) and 325 lb⋅ft (441 N⋅m; 45 kg⋅m) of torque. A 2.7-liter twin-turbocharged EcoBoost V6 is optional; the larger variant makes 330 hp (335 PS; 246 kW) and 415 lb⋅ft (563 N⋅m; 57 kg⋅m) of torque.^[62] The 2.7-liter V6 is only available with a 10-speed automatic transmission while the 2.3-liter can be mated with either the 10-speed automatic or a standard 7-speed Getrag manual.^[63] Despite the nomenclature, the Getrag transmission is not a true seven-speed transmission, instead being a traditional six-speed unit with a dedicated crawler gear (the "C" on the shift knob) as the "seventh gear".

Recalling the original Bronco Roadster, removable doors with frameless glass combined with a detachable roof allow open-air driving on both two- and four-door models, each with both a 11.6 in (295 mm) ground clearance.^[49] Doors can be user-removed and stored in the rear cargo area, and the mirrors are attached to the body cowl instead of on the doors, allowing the user to remove the doors and still have the mirrors attached to the vehicle.^[64] The leading edge of the front fenders feature raised black brackets, called trail sights, to facilitate navigation and serve as tie-downs and accessory mounts.^[47]

The body-on-frame construction uses front twin A-arm independent suspension and a rear five-link coilover suspension and a solid axle. The optional HOSS (High-Performance Off-Road Stability Suspension) setup replaces these with position-sensitive Bilstein shocks, with multiple compression and rebound zones, at all four corners. The front sway bar features a hydraulic disconnect to increase articulation when crawling, automatically reconnecting when brought back to speed. An option package, marketed as Sasquatch, includes a mild suspension lift, and 35-inch tires - the largest of any production vehicle besides the upcoming 3rd generation Ford Raptor, which has optional 37-inch tires.

Standard equipment includes Dana axles with front and rear electronic differentials, both user-lockable via dashboard switches. The drivetrain can toggle between 4WD Low, 4WD High, 4WD Automatic, and 2WD High (rear-wheel drive), controlled by a dial near the gear selector rather than a secondary shifter aside the main shift lever.^[49]

Optional equipment includes a terrain management system, marketed as "G.O.A.T. Modes" (Goes Over Any Type of Terrain).^[65] The system calibrates throttle response, four-wheel drive, traction control, and transmission shifts to maximize traction when offroading. Up to seven modes are available with this system: Normal, Eco, Sport, Slippery, and Sand, along with Baja, Mud and Ruts, and Rock Crawl. The available Trail One-Pedal Drive automatically applies and holds the brakes when the driver lifts off the gas pedal, removing the need for left-foot braking and preventing unexpected rollbacks. The sixth-generation Bronco also offers Trail Turn Assist, which utilizes the torque-vectoring system to help the vehicle turn in tight offroad corners.

An optional topographical map software, marketed as Trail Maps, allows owners to share smartphone-downloaded topo maps to the vehicle's In-car entertainment system and record videos of trail runs, display telemetry or map data, and upload to the cloud.^[66] The sixth generation features a tray that slides from under the rear cargo compartment. An action mount on the front dash to allow for phone and camera mounting, waterproof switches and rubber floors are also available.^[67]

Bronco Raptor

2023 Bronco Raptor

Ford announced a Raptor trim level for 2022 in a 4-door version only. Developed by Ford Performance, the Bronco Raptor has a EcoBoost 3.0 TT V6 with a "Baja Mode", making 418 hp and 440 lb-ft of torque.^[68] The vehicle will also have an upgraded cooling system, which would allow the Bronco Raptor to run better in higher temperatures.

The Bronco Raptor is also wider at 85.7 inches (2,180 mm) and sits on a new Fox suspension with 13.1 inches (330 mm) of ground clearance (1.6 inches (41 mm) more than the Bronco with the Sasquatch package). Many other components in the Bronco Raptor have been upgraded or added such as stronger axles, more rigid cross bars, a dual exhaust with several different exhaust modes, 37 inch tires, a higher strength frame, reinforced front bumper, larger drive shafts for increased wheel torque, better brakes (from the F-150 Raptor), Ford nameplate grill (unlike Bronco on other trims), and a tow/haul mode. The Bronco Raptor is capable of towing 4,500 pounds (2,000 kg) which is 1,000 pounds (450 kg) more than the standard Bronco. Due to the Bronco Raptor's width, there is additional government-mandated lighting. The interior of the Bronco Raptor is also different from other trims. Unique "code orange" accents and stitching, additional bolstering to the seats with Raptor embroidered stitching, carbon fiber trim, a thicker steering wheel, magnesium paddle shifters, a leather stitched dashboard, and a larger center touchscreen.^[69]

Trim levels

Bronco Base

Bronco Big Bend with Sasquatch Package

Bronco Outer Banks

Bronco Badlands

Bronco Wildtrak

The Bronco is available in several trim levels:

• The entry-level trim of the Bronco is known as the Base. Available as either a two-door or a four-door model, the Base comes equipped with the 2.3L EcoBoost Twin-Scroll Turbocharged Inline Four-Cylinder (I4) gasoline engine mated to a seven-speed manual transmission, the SYNC 4 eight-inch touchscreen infotainment system with wired and wireless Apple CarPlay and Android Auto smartphone integration, a six-speaker audio system, SiriusXM Satellite Radio, a 4G LTE wireless modem, cloth seating surfaces, air conditioning, sixteen-inch silver-painted steel wheels with 30" tires, and keyless entry.
• The Big Bend trim level of the Bronco, available as either a two-door or a four-door model, adds more convenience and styling features to the Base trim, including seventeen-inch Carbonized Gray-finished aluminum-alloy wheels with 32" tires and a leather-wrapped steering wheel and gear lever.
• The Black Diamond trim level of the Bronco is marketed as the "rugged" trim level of the Bronco lineup. Available as either a two-door or a four-door model, the Black Diamond adds features to the Big Bend trim such as seventeen-inch black-painted steel wheels with 32" tires, marine-grade vinyl-trimmed seating surfaces, a powder coated steel front bumper with LED front fog lamps and tow hooks, and rubberized flooring with drain plugs.
• The Outer Banks trim level of the Bronco, available as either a two-door or a four-door model, is the luxury-oriented trim level of the Bronco lineup. Added standard equipment to the Big Bend trim level includes eighteen-inch machined-face aluminum-alloy wheels with 32" tires, dual heated front bucket seats, powder coated side steps, and LED front headlamps and fog lamps.
• The Badlands is one of three off-road oriented Bronco trim levels. Available as either a two-door or a four-door model, the Badlands trim adds features onto the Outer Banks trim level such as seventeen-inch Carbonized Gray-finished aluminum-alloy wheels with 33" tall tires, additional G.O.A.T. modes for the four wheel drive system, an upgraded suspension system, a front stabilizer bar disconnect, a powder coated steel front bumper with integrated LED front fog lamps and tow hooks, and marine-grade vinyl-trimmed seating surfaces.
• The Wildtrak is another off-road oriented Bronco trim level. Available as either a two-door or a four-door model, the Wildtrak trim adds features onto the Badlands trim level such as the Sasquatch Package, the 2.7L EcoBoost Twin-Turbocharged V6 gasoline engine mated to a ten-speed automatic transmission, a unique front hood graphic, cloth seating surfaces, and dual heated front bucket seats.
• The Everglades trim, available for the 2022 model year and available only as a four-door model, is a special-edition model based on the standard equipment of the rugged Black Diamond trim, but adds unique front fender graphics that double as a depth meter for fording water, unique aluminum-alloy wheels, a heavy-duty modular front bumper, and the SYNC 4A twelve-inch touchscreen infotainment system with wired and wireless Apple CarPlay and Android Auto smartphone integration and SiriusXM Satellite Radio with 360L.
• The Raptor, introduced for the 2022 model year and only available as a four-door model, is the top-tier Bronco trim level. The Raptor trim adds features onto the Wildtrak trim level such as 37" tall tires and beadlock-capable aluminum-alloy wheels, the 3.0L EcoBoost Twin-Turbocharged V6 gasoline engine mated to a ten-speed automatic transmission, a heavy-duty modular front bumper with Rigid Industries-branded front fog lamps, marine-grade vinyl-trimmed seating surfaces with cloth inserts, specially-bolstered front bucket seats, a 360-degree off-road camera system, the SYNC 4A twelve-inch touchscreen infotainment system with wired and wireless Apple CarPlay and Android Auto smartphone integration and SiriusXM Satellite Radio with 360L, and heavy-duty steel bash plates. The Raptor is the second of three vehicles to join the Raptor lineup, following the Ford F-150 Raptor, and will also be followed by an all-new Ford Ranger Raptor model.
• The First Edition model, based on the equipment of the Badlands trim and available as either a two-door or a four-door model, was also available for the 2021 model year. Production was initially limited to only 7,000 units, although Ford later increased the amount of First Edition Broncos it would build due to increased demand.

Sales

1966 Bronco Dune Duster

For the 1965 Detroit Auto Show Ford constructed a special Bronco roadster. According to Ford,

A special, customized version of Ford Division's 1966 Bronco, the Dune Duster, will be displayed at the Detroit Auto Show from November 27 through December 5. The utility/sports-type vehicle was designed in Ford's Styling Center in Dearborn and built by Parris Kustom in North Hollywood, California. Exterior paint is a specially formulated Golden Saddle Pearl and modifications include an NHRA-approved roll bar with integral headrests, a windshield designed to complement the contour of the roll bar, walnut appliques on the rear side panels and exposed chrome exhaust pipes. Custom interior appointments include a walnut steering wheel and front bucket seats with russet suede bolsters and perforated leather cushions and seatbacks. The instrument panel is trimmed with suede padding and outfitted with walnut-trimmed control knobs. Jump seats have been added to the rear compartment over the wheels and a tonneau cover for rear compartment protection was added for attachment with quick-fastening snaps.^[71]

1970 Bronco Wildflower

For 1970, Ford re-dressed the Dune Duster as the Wildflower:

The Wildflower, a specially customized version of Ford Division's popular four-wheel-drive Bronco, is sure to be one of the most colorful show cars on display at automobile shows this year. The unique vehicle, planned in Ford's Design Center in Dearborn, Mich., was extensively modified, inside and out, to achieve a lively carefree appearance with added luxury and safety features. The dominant exterior characteristic of the Wildflower is the lively multi-colored paint treatment. The psychedelic design of blues, yellows and reds is topped off by a pink grille.^[72]

1973 Big Bronco prototypes

In 1973, Ford Advanced Light Truck Engineering developed four future Ford Bronco prototypes. To better match the market success of the Chevrolet Blazer, Ford required its designers to shift from a dedicated chassis used by the model line to a shortened F-100 as the basis for a future Bronco.^[73][74] Dubbed "Project Shorthorn", the prototype was constructed using the top and tailgate from a Chevrolet K5 Blazer, mating it to a shortened-wheelbase F-100.^[73] While the use of Chevrolet components was used purely for proof of concept, further development by Ford adopted a half-cab design (one design objective was the use of F-Series doors, along with a removable top).^[74]

Project Shorthorn was among four prototypes, alongside Longhorn (a four-door wagon-style SUV, similar to the Chevrolet Suburban), Midhorn (sized between the Jeep Wagoneer and International Travelall; a precursor to the Chevrolet Tahoe), and the Widehorn (a wide-body F-100 4x4, a precursor to the Ford Raptor).^[73][75]

As the development of Project Shorthorn happened during the OPEC oil crisis, the model program was postponed to the 1978 model year as Ford sought a more promising outcome.^[73][75] While the Longhorn/Midhorn four-door wagons saw a positive response, they were ultimately shelved, as the Project Shorthorn was introduced for only a two-year production (before a full redesign). Ford would not produce a production four-door SUV until the 1991 Ford Explorer (smaller than the Midhorn) and the 1997 Ford Expedition (between the Midhorn and Longhorn in size).

1981 Bronco Montana Lobo

Built on a 1977 Bronco chassis, it included "a pair of expansive Plexiglas bubble doors that were removable and that had a vague resemblance to the expanse of clear plastic that passed for four-weather doors on the Dune Duster. It included a rollbar that – though likely not NHRA certified and though integrated with side louvers and lights – still had a rough airfoil shape like the Dune Duster's. It included side pipes like the Dune Duster's. It included fold-up bench seats for bed seating like the Dune Duster's In addition, the Montana Lobo included foam bumpers, a winch integrated into the front bumper, a retractable loading ramp built into the tailgate, storage compartments integrated into the bed sides, a T-top roof, and a massive tinted window between the cab and the bed that slid open."^[75][76]

1988 Bronco DM-1

Built on a Ford Escort platform, the DM-1 concept was a "4-wheel drive concept vehicle was the winning design in a Ford sponsored contest for industrial art students. Mr. Derek Millsap, who created the 5-seat sport-utility vehicle, lent his initials to the Bronco DM-1 name. The bulbous body was made of steel-reinforced fiberglass, and the large hatch extended into the roof."

2001 U260

In 1999, a new Bronco was secretly developed under Moray Callum, as a simple inexpensive off-roader in the spirit of the first generation Bronco, rather than the later full-size models. Planned as a 2-door and 4-door, it was codenamed U260, U meaning utility, 2 meaning 2-door, and 60 referring to the Ford Ranger's T6 platform it would have used. Land Rover underpinnings were considered but was deemed too costly. The project did not progress to a drivable state and was canceled in 2001 due to company cutbacks stemming from the Firestone and Ford tire incident.^[77][52] The project was publicly revealed for the first time in the leadup to the sixth gen Bronco's release, with a full-size research model displayed at the 2021 Concours d’Elegance Of America.^[78]

2004 Bronco Concept

Bronco concept at the 2004 New York Auto Show

At the 2004 North American International Auto Show, a Ford Bronco concept vehicle was unveiled. Inspired by the first-generation (1966–1977) Ford Bronco, the 2004 concept adapted a short wheelbase, round headlamps, and squared-off roofline; the concept marked one of the first uses of a three-bar grille on Ford vehicles. Using a minimalist exterior design, the Bronco design was unveiled alongside a Shelby Cobra Concept at the same show.

Using the Ford CD2 platform of the Ford Escape,^[79][80] the Bronco concept was powered by a 2.0L four-cylinder turbodiesel (from the Ford Mondeo) and a six-speed manual transmission. Replacing ControlTrac II, an "Intelligent" 4-wheel drive system was intended for improved stability and fuel economy.

A new production Bronco was attempted in 2006, adapting the Bronco concept's design over the International Ford Ranger's chassis. It was to be exported to the US from South Africa, where it would have been built alongside the Ranger in Pretoria. It was canceled as it was seen as a risk due to rising gas prices, slowing SUV sales and weakening economy ahead of the Great Recession.^[52]

Dwayne Johnson's character drives the Bronco concept in his 2018 movie, Rampage.^[81]

2013 Expedition "special edition” concept

Ford marketer Mark Grueber spoke of a Ford Expedition show build concept that wore an intentionally nondescript rear Bronco badge, solely to prevent expiration of the Bronco trademark.^[52] It is unclear which concept he is referring to.

2020 Bronco R Prototype

At the 2019 Baja 1000, Ford introduced the Ford Bronco R prototype with the drivetrain of the new as-yet unreleased 2021 Bronco with the intent of testing the engine, transmission and four-wheel-drive system to be used in the production-spec sixth-generation Bronco. The Baja 1000 was thought to be the perfect test for the new off-road vehicle Ford is producing, with 1000 miles of some of the world's roughest terrain. The 2020 race was also tougher after being delayed for 24 hours due to excessive rainfall in the days before the event. With the excessive rainfall, one of the Class One co-drivers Ford used in the race referred to it as the "Mud Bog 1000".While the Bronco R prototype model used for the Baja 1000 shared some components with the production Bronco, Ford upfitted the Bronco R with off-road-tuned racing suspension as well as off-road wheels and 37-inch off-road tires.^[82] The Bronco R also used a 70-gallon fuel tank during the race, allowing the prototype to travel up to 315 miles of the course before refueling.^[82] While this would have been a significant advantage to the Bronco R team, it was not taken advantage of. The Bronco R team made a stop every 130 miles to swap drivers, as well as checking the vehicle's condition and making sure there were no repairs needed at the time.

Ford did not disclose details of the engine used in the Bronco R. The only information that is known was that the engine was a twin-turbo EcoBoost engine. When it came to the four-wheel drive system, the vehicle experienced no issues with muddy sections of the course. While the drivers only had to use four-wheel drive with low gearing to get out of thick mud, the Bronco R stopped multiple times along the course to tug other competitors out of the mud, including a near 6,000 pound trophy truck. While the Bronco R's engine, transmission and four-wheel drive held up with no issues, many of the aftermarket suspension components did not fare the same. Around mile 495 of the 1000 mile journey, the passenger side spindle, lower-control arm and CV joint had been destroyed. The team was able to fix most issues and were able to continue the race until around mile 580, when the engine cooling fans began giving out (one fan had completely seized up, while the other was not working at max speed) causing the Bronco R to overheat and needing to be towed about eight miles to the next filling station. After about 30 minutes of working on the Bronco R to try to get it back on course, Ford pulled the vehicle out of the race due to severe mechanical issues.^[83]