HP Integral PC

The HP Integral PC (or HP 9807A) is a portable UNIX workstation computer system produced by Hewlett-Packard, launched in 1985 at a price of £5450.[1] It utilizes the Motorola 68000 microprocessor (running at 8 MHz) and ran the HP-UX 1.0 operating system.[2]

Hardware

Display of the HP Integral PC
HP Integral PC with QZERTY keyboard layout

The Integral PC is a mains-powered portable computer with a 9-inch amber electroluminescent display with a resolution of 512×255 pixels or 80×25 characters (the 256th line of the display is not used).[3] It also incorporated a 710 kB 3.5" floppy disk drive and an HP ThinkJet ink-jet printer. Standard memory capacity was 256 KB ROM plus 512 KB RAM, expandable to 7.5 MB.[2] Expansion slots and an HP-IB bus were also included. The mechanical design was based on the ideas of the de facto standard HP-85.

Within the Integral PC CPU, RAM, ROM, memory management, I/O buffering, system timing and keyboard interface are integrated on a single logic-board. All peripheral units and the 14 connections are built using independent boards. Each board is smaller than a letter sized sheet. To make it easier to check the boards, each board contains an own timer. The I/O-board (with two connections for optional addons), the keyboard-interface, the "Human Interface Link" HP-HIL and the power supply can be checked and tested independently.

The graphics processor of the Integral PC (GPU) was custom made and could drive an electroluminescence display or nearly every kind of monitor. The processor provides a graphical subsystem which is simple to use to drive a bitmapped display (32 KB display memory). The GPU is able to draw lines, rectangles and alphanumerical characters by hardware. Additionally it provides a hardware cursor and the display-RAM-interface.[4]

The electroluminescence-display was based on thin-film-technique developed by HP and other companies.[3]

Software

The Integral PC is unusual in that the HP-UX operating system kernel resided in the ROM,[2] which also included the HP Windows graphical user interface and the Personal Applications Manager (PAM).[5] HP-UX commands and utilities were supplied separately on floppy disk, with separate disks for standard Unix commands (including the C shell), utilities, diagnostics and system programming resources.[6] There was an add on ROM that provides HP-BASIC. Using the ROM, the Integral PC was ready to run BASIC simply by switching on the system.

See also

References

  1. ↑ Kewney, Guy (March 1985). "Newsprint". Personal Computer World. p. 99. Retrieved 21 November 2020.
  2. 1 2 3 Fajardo, Ray M.; Rood, Andrew L.; Andreas, James R.; Cline, Robert C. (October 1985). "A UNIX Operating System Adapted for a Technical Personal Computer". Hewlett-Packard Journal. 36 (10): 22–28. Retrieved 4 October 2020.
  3. 1 2 Higgins, Marvin L. (October 1985). "High-Quality Electroluminescent Display for a Personal Workstation". Hewlett-Packard Journal. 36 (10): 12–17. Retrieved 4 October 2020.
  4. ↑ Heath, Dean M. (October 1985). "Custom Graphics Processor Unit for the Integral PC". Hewlett-Packard Journal. 36 (10): 10–12. Retrieved 4 October 2020.
  5. ↑ Brewster, Jon A.; Helt, Karen S.; Phillips, James N. (October 1985). "A Friendly UNIX Operating System User Interface". Hewlett-Packard Journal. 36 (10): 28–35. Retrieved 4 October 2020.
  6. ↑ Walker, Nick (June 1985). "Hewlett-Packard Integral PC". Personal Computer World. pp. 144–146, 148, 150. Retrieved 12 October 2020.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.