Hampton One-Design
Development
DesignerVincent Serio
LocationUnited States
Year1934
No. built900
Builder(s)Vincent Serio
RoleOne-design racer
NameHampton One-Design
Boat
Displacement755 lb (342 kg)
Draft3.50 ft (1.07 m) with centerboard down
Hull
TypeMonohull
ConstructionWood or fiberglass
LOA18.00 ft (5.49 m)
LWL14.00 ft (4.27 m)
Beam5.79 ft (1.76 m)
Hull appendages
Keel/board typecenterboard
Rudder(s)transom-mounted rudder
Rig
Rig typeBermuda rig
Sails
SailplanFractional rigged sloop
Total sail area175 sq ft (16.3 m2)
Racing
D-PN92.0

The Hampton One-Design is an American sailing dinghy that was designed by Vincent Serio as a one-design racer and first built in 1934.[1][2]

The boat design was chosen by a Hampton Yacht Club committee that was formed to select a sloop for racing on Chesapeake Bay, with its shallow waters.[1]

Production

The first 500 boats were constructed by the designer, Vincent Serio in the United States. At least 60 boats were built from fiberglass as well, once the class rules were amended to permit that material. By 1994, 710 boats had been built and 900 have now been completed. The type club has specifications and plans available for amateur construction.[1][2][3]

Design

The Hampton One-Design is a recreational sailboat, built predominantly of cedar wood or, since 1961 of fiberglass, with wooden trim. It has a fractional sloop rig with wooden or aluminum spars. The hull has a spooned raked stem, an angled transom, a transom-hung rudder controlled by a tiller and a retractable centerboard. It displaces 755 lb (342 kg).[1][2]

The boat has a draft of 3.50 ft (1.07 m) with the centerboard extended and 7 in (18 cm) with it retracted, allowing beaching or ground transportation on a trailer.[1]

The class rules were amended in 1962 to allow a trapeze and aluminum spars. No spinnaker or genoa are used and the boat is sailed with just a mainsail and jib.[1][2]

The design has a Portsmouth Yardstick racing average handicap of 92.0 and is normally raced with a crew of one or two sailors.[2]

Operational history

The boat is supported by an active type club, the Hampton One-Design Class Racing Association, which regulates the design and organizes races.[4]

By 1994 there was a fleet of 40 boats racing from the St. Mary's River Yacht Club on the St. Marys River, Maryland.[2]

In a 1994 review Richard Sherwood wrote, "look for Hamptons in the Chesapeake Bay. A very strict, one-design class association was established in 1938, when 70 boats were racing ... They have always been quick in light airs, but with the trapeze, they may also be sailed in heavier conditions."[2]

See also

References

  1. 1 2 3 4 5 6 McArthur, Bruce (2020). "Hampton One-Design sailboat". sailboatdata.com. Archived from the original on 12 October 2020. Retrieved 11 October 2020.
  2. 1 2 3 4 5 6 7 Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 92-93. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
  3. Hampton One-Design. "The Hampton One-Design Class Racing Association". hamptononedesign.com. Archived from the original on 11 October 2020. Retrieved 11 October 2020.
  4. McArthur, Bruce (2020). "Hampton One-Design". sailboatdata.com. Archived from the original on 11 October 2020. Retrieved 11 October 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.