Hexafluorobenzene
Skeletal formula of hexafluorobenzene
Space-filling model of hexafluorobenzene
Names
Preferred IUPAC name
Hexafluorobenzene
Other names
Perfluorobenzene
Identifiers
3D model (JSmol)
Abbreviations HFB
1683438
ChEBI
ChemSpider
ECHA InfoCard 100.006.252
EC Number
  • 206-876-2
101976
UNII
  • InChI=1S/C6F6/c7-1-2(8)4(10)6(12)5(11)3(1)9 checkY
    Key: ZQBFAOFFOQMSGJ-UHFFFAOYSA-N checkY
  • InChI=1/C6F6/c7-1-2(8)4(10)6(12)5(11)3(1)9
    Key: ZQBFAOFFOQMSGJ-UHFFFAOYAJ
  • Fc1c(F)c(F)c(F)c(F)c1F
Properties
C6F6
Molar mass 186.056 g·mol−1
Appearance Colorless liquid
Density 1.6120 g/cm3
Melting point 5.2 °C (41.4 °F; 278.3 K)
Boiling point 80.1 °C (176.2 °F; 353.2 K)
1.377
Viscosity cP (1.200 mPa•s) (20 °C)
0.00 D (gas)
Hazards[1]
GHS labelling:
GHS02: Flammable
Warning
H225
P210, P233, P240, P241, P242, P243
Flash point 10 °C (50 °F; 283 K)[2]
Related compounds
Related compounds
Benzene
Hexachlorobenzene
Polytetrafluoroethylene
Perfluorotoluene
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references

Hexafluorobenzene, HFB, C
6
F
6
, or perfluorobenzene is an organofluorine compound. In this derivative of benzene, all hydrogen atoms have been replaced by fluorine atoms. The technical uses of the compound are limited, although it has some specialized uses in the laboratory owing to distinctive spectroscopic properties.

Geometry of the aromatic ring

Hexafluorobenzene stands somewhat aside in the perhalogenbenzenes. When counting for bond angles and distances it is possible to calculate the distance between two ortho fluorine atoms. Also the non bonding radius of the halogens is known. The following table presents the results:[3]

Formula Name Calculated
inter-halogen
distance, aromatic ring assumed planar
Twice nonbonding radius Consequent symmetry of the benzene
C6F6hexafluorobenzene279270D6h
C6Cl6hexachlorobenzene312360D3d
C6Br6hexabromobenzene327390D3d
C6I6hexaiodobenzene354430D3d

Hexafluorobenzene is the only perhalobenzene being planar, the other perhalobenzene species exhibiting buckling. As a consequence, in C6F6 the overlap between the p-orbitals is optimal versus the other perhalobenzenes, resulting in lower aromaticity of those compounds compared to C6F6.

Synthesis

The direct synthesis of hexafluorobenzene from benzene and fluorine has not been useful. Instead it is prepared by the reaction of alkali-fluorides with halogenated benzene:[4]

C6Cl6 + 6 KF → C6F6 + 6 KCl

Reactions

Most reactions of hexafluorobenzene proceed with displacement of fluoride. One example is its reaction with sodium hydrosulfide to afford pentafluorothiophenol:[5]

C6F6 + NaSH → C6F5SH + NaF

The reaction of pentafluorophenyl derivatives has been long puzzling for its mechanism. Independent of the substituent, they all exhibit a para directing effect. The new introduced group too has no effect on the directing behaviour. In all cases, a 1,4-disubstituted-2,3,5,6-tetrafluorobenzene derivative shows up. Finally, the clue is found not in the nature of the non-fluorine substituent, but in the fluorines themselves. The π-electropositive effect introduces electrons into the aromatic ring. The non-fluorine substituent is not capable of doing so. As charge accumulates at the ortho and para positions relative to the donating group, the ortho and para-positions relative to the non-fluorine substituent receive less charge, so are less negative or more positive. Furthermore, the non-fluorine substituent in general is more bulky than fluorine, so its ortho-positions are sterically shielded, leaving the para-position as the sole reaction site for anionic entering groups.

UV light causes gaseous HFB to isomerize to hexafluoro derivative of Dewar benzene.[6]

Laboratory applications

Hexafluorobenzene has been used as a reporter molecule to investigate tissue oxygenation in vivo. It is exceedingly hydrophobic, but exhibits high gas solubility with ideal liquid gas interactions. Since molecular oxygen is paramagnetic it causes 19F NMR spin lattice relaxation (R1): specifically a linear dependence R1= a + bpO2 has been reported.[7] HFB essentially acts as molecular amplifier, since the solubility of oxygen is greater than in water, but thermodynamics require that the pO2 in the HFB rapidly equilibrates with the surrounding medium. HFB has a single narrow 19F NMR signal and the spin lattice relaxation rate is highly sensitive to changes in pO2, yet minimally responsive to temperature. HFB is typically injected directly into a tissue and 19F NMR may be used to measure local oxygenation. It has been extensively applied to examine changes in tumor oxygenation in response to interventions such as breathing hyperoxic gases or as a consequence of vascular disruption.[8] MRI measurements of HFB based on 19F relaxation have been shown to correlate with radiation response of tumors.[9] HFB has been used as a gold standard for investigating other potential prognostic biomarkers of tumor oxygenation such as BOLD (Blood Oxygen Level Dependent),[10] TOLD (Tissue Oxygen Level Dependent) [11] and MOXI (MR oximetry) [12] A 2013 review of applications has been published.[13]

HFB has been evaluated as standard in fluorine-19 NMR spectroscopy.[14]

Toxicity

Hexafluorobenzene may cause eye and skin irritation, respiratory and digestive tract irritation and can cause central nervous system depression per MSDS.[15] The National Institute for Occupational Safety and Health (NIOSH) lists it in its Registry of Toxic Effects of Chemical Substances as neurotoxicant.

See also

References

  1. "Hexafluorobenzene 99%". Sigma Aldrich.
  2. Acros Organics:Catalog of fine Chemicals (1999)
  3. Delorme, P.; Denisselle, F.; Lorenzelli, V. (1967). "Spectre infrarouge et vibrations fondamentales des dérivés hexasubstitués halogénés du benzène" [Infrared spectrum and fundamental vibrations of the hexasubstituted halogen derivatives of benzene]. Journal de Chimie Physique (in French). 64: 591–600. Bibcode:1967JCP....64..591D. doi:10.1051/jcp/1967640591.
  4. Vorozhtsov, N. N. Jr.; Platonov, V. E.; Yakobson, G. G. (1963). "Preparation of hexafluorobenzene from hexachlorobenzene". Bulletin of the Academy of Sciences of the USSR, Division of Chemical Science. 12 (8): 1389. doi:10.1007/BF00847820.
  5. Robson, P.; Stacey, M.; Stephens, R.; Tatlow, J. C. (1960). "Aromatic polyfluoro-compounds. Part VI. Penta- and 2,3,5,6-tetra-fluorothiophenol". Journal of the Chemical Society (4): 4754–4760. doi:10.1039/JR9600004754.
  6. Lemal, David M. (2001). "Hexafluorobenzene Photochemistry: Wellspring of Fluorocarbon Structures". Accounts of Chemical Research. 34 (8): 662–671. doi:10.1021/ar960057j. PMID 11513574.
  7. Zhao, D.; Jiang, L.; Mason, R. P. (2004). "Measuring changes in tumor oxygenation". In Conn, P. M. (ed.). Imaging in Biological Research, Part B. Methods in Enzymology. Vol. 386. Elsevier. pp. 378–418. doi:10.1016/S0076-6879(04)86018-X. ISBN 978-0-12-182791-5. PMID 15120262.
  8. Zhao, D.; Jiang, L.; Hahn, E. W.; Mason, R. P. (2005). "Tumor physiologic response to combretastatin A4 phosphate assessed by MRI". International Journal of Radiation Oncology, Biology, Physics. 62 (3): 872–880. doi:10.1016/j.ijrobp.2005.03.009. PMID 15936572.
  9. Zhao, D.; Constantinescu, A.; Chang, C.-H.; Hahn, E. W.; Mason, R. P. (2003). "Correlation of tumor oxygen dynamics with radiation response of the Dunning prostate R3327-HI tumor". Radiation Research. 159 (5): 621–631. doi:10.1667/0033-7587(2003)159[0621:COTODW]2.0.CO;2. PMID 12710873.
  10. Zhao, D.; Jiang, L.; Hahn, E. W.; Mason, R. P. (2009). "Comparison of 1H blood oxygen level–dependent (BOLD) and 19F MRI to investigate tumor oxygenation". Magnetic Resonance in Medicine. 62 (2): 357–364. doi:10.1002/mrm.22020. PMC 4426862. PMID 19526495.
  11. Hallac, R. R.; Zhou, H.; Pidikiti, R.; Song, K.; Stojadinovic, S.; Zhao, D.; Solberg, T.; Peschke, P.; Mason, R. P. (2014). "Correlations of noninvasive BOLD and TOLD MRI with pO2 and relevance to tumor radiation response". Magnetic Resonance in Medicine. 71 (5): 1863–1873. doi:10.1002/mrm.24846. PMC 3883977. PMID 23813468.
  12. Zhang, Z.; Hallac, R. R.; Peschke, P.; Mason, R. P. (2014). "A noninvasive tumor oxygenation imaging strategy using magnetic resonance imaging of endogenous blood and tissue water". Magnetic Resonance in Medicine. 71 (2): 561–569. doi:10.1002/mrm.24691. PMC 3718873. PMID 23447121.
  13. Yu, J.-X.; Hallac, R. R.; Chiguru, S.; Mason, R. P. (2013). "New frontiers and developing applications in 19F NMR". Progress in Nuclear Magnetic Resonance Spectroscopy. 70: 25–49. doi:10.1016/j.pnmrs.2012.10.001. PMC 3613763. PMID 23540575.
  14. Rosenau, Carl Philipp; Jelier, Benson J.; Gossert, Alvar D.; Togni, Antonio (2018). "Exposing the Origins of Irreproducibility in Fluorine NMR Spectroscopy". Angewandte Chemie International Edition. 57 (30): 9528–9533. doi:10.1002/anie.201802620. PMID 29663671.
  15. "Material safety data sheet: Hexafluorobenzene, 99%". Fisher Scientific. Thermo Fisher Scientific. n.d. Retrieved 2020-02-08.

Further reading

  • Pummer, W. J.; Wall, L. A. (1958). "Reactions of hexafluorobenzene". Science. 127 (3299): 643–644. Bibcode:1958Sci...127..643P. doi:10.1126/science.127.3299.643. PMID 17808882.
  • US patent 3277192, Fielding, H. C., "Preparation of hexafluorobenzene and fluorochlorobenzenes", issued 1966-10-04, assigned to Imperial Chemical Industries 
  • Bertolucci, M. D.; Marsh, R. E. (1974). "Lattice parameters of hexafluorobenzene and 1,3,5-trifluorobenzene at −17°C". Journal of Applied Crystallography. 7 (1): 87–88. doi:10.1107/S0021889874008764.
  • Samojłowicz, C.; Bieniek, M.; Pazio, A.; Makal, A.; Woźniak, K.; Poater, A.; Cavallo, L.; Wójcik, J.; Zdanowski, K.; Grela, K. (2011). "The doping effect of fluorinated aromatic solvents on the rate of ruthenium‐catalysed olefin metathesis". Chemistry: A European Journal. 17 (46): 12981–12993. doi:10.1002/chem.201100160. PMID 21956694.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.