ISO 11446
Type Trailer Connector
Superseded ISO 1724 (12N)
ISO 3732 (12S)
General specifications
Pins 13
Pinout
Pin 1 Left indicator
Pin 2 Rear fog lamp
Pin 3 Ground [lower-alpha 1]
Pin 4 Right indicator
Pin 5 Right tail lamp [lower-alpha 2]
Pin 6 Brake lamp
Pin 7 Left tail lamp[lower-alpha 2]
Pin 8 Reverse lamp
Pin 9 Permanent power
Pin 10 Switched supply (for fridge)
Pin 11 Ground for pin 10 [lower-alpha 1]
Pin 12 Trailer Presence Detection[lower-alpha 3]
Pin 13 Ground for pin 9 [lower-alpha 1]

ISO 11446:2004 specifies a 13-pole electrical connector between towing and towed vehicles with 12 volt electrical system. It was developed in 1987 by Erich Jaeger[1] to replace older 7-pin plugs.

13-pin female socket (ISO 11446)

Notes

  1. 1 2 3 Pins 3, 11 & 13 must not be joined in the trailer to prevent ground loops
  2. 1 2 Pins 5 & 7 must not be joined in the trailer without a pair of diodes
  3. Pin 12 was assigned prior to 2012; older vehicles could be using this for a different function

References

  1. "ISO 11446 - the JAEGER system for trailer connectors".

Sources


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.