Schematic of Jackknife Resampling

In statistics, the jackknife (jackknife cross-validation) is a cross-validation technique and, therefore, a form of resampling. It is especially useful for bias and variance estimation. The jackknife pre-dates other common resampling methods such as the bootstrap. Given a sample of size ${\displaystyle n}$, a jackknife estimator can be built by aggregating the parameter estimates from each subsample of size ${\displaystyle (n-1)}$ obtained by omitting one observation.^[1]

The jackknife technique was developed by Maurice Quenouille (1924–1973) from 1949 and refined in 1956. John Tukey expanded on the technique in 1958 and proposed the name "jackknife" because, like a physical jack-knife (a compact folding knife), it is a rough-and-ready tool that can improvise a solution for a variety of problems even though specific problems may be more efficiently solved with a purpose-designed tool.^[2]

The jackknife is a linear approximation of the bootstrap.^[2]

A simple example: mean estimation

The jackknife estimator of a parameter is found by systematically leaving out each observation from a dataset and calculating the parameter estimate over the remaining observations and then aggregating these calculations.

For example, if the parameter to be estimated is the population mean of random variable ${\displaystyle x}$, then for a given set of i.i.d. observations ${\displaystyle x_{1},...,x_{n}}$ the natural estimator is the sample mean:

${\displaystyle {\bar {x}}={\frac {1}{n}}\sum _{i=1}^{n}x_{i}={\frac {1}{n}}\sum _{i\in [n]}x_{i},}$

where the last sum used another way to indicate that the index ${\displaystyle i}$ runs over the set ${\displaystyle [n]=\{1,\ldots ,n\}}$.

Then we proceed as follows: For each ${\displaystyle i\in [n]}$ we compute the mean ${\displaystyle {\bar {x}}_{(i)}}$ of the jackknife subsample consisting of all but the ${\displaystyle i}$-th data point, and this is called the ${\displaystyle i}$-th jackknife replicate:

${\displaystyle {\bar {x}}_{(i)}={\frac {1}{n-1}}\sum _{j\in [n],j\neq i}x_{j},\quad \quad i=1,\dots ,n.}$

It could help to think that these ${\displaystyle n}$ jackknife replicates ${\displaystyle {\bar {x}}_{(1)},\ldots ,{\bar {x}}_{(n)}}$ give us an approximation of the distribution of the sample mean ${\displaystyle {\bar {x}}}$ and the larger the ${\displaystyle n}$ the better this approximation will be. Then finally to get the jackknife estimator we take the average of these ${\displaystyle n}$ jackknife replicates:

${\displaystyle {\bar {x}}_{\mathrm {jack} }={\frac {1}{n}}\sum _{i=1}^{n}{\bar {x}}_{(i)}.}$

One may ask about the bias and the variance of ${\displaystyle {\bar {x}}_{\mathrm {jack} }}$. From the definition of ${\displaystyle {\bar {x}}_{\mathrm {jack} }}$ as the average of the jackknife replicates one could try to calculate explicitly, and the bias is a trivial calculation but the variance of ${\displaystyle {\bar {x}}_{\mathrm {jack} }}$ is more involved since the jackknife replicates are not independent.

For the special case of the mean, one can show explicitly that the jackknife estimate equals the usual estimate:

${\displaystyle {\frac {1}{n}}\sum _{i=1}^{n}{\bar {x}}_{(i)}={\bar {x}}.}$

This establishes the identity ${\displaystyle {\bar {x}}_{\mathrm {jack} }={\bar {x}}}$. Then taking expectations we get ${\displaystyle E[{\bar {x}}_{\mathrm {jack} }]=E[{\bar {x}}]=E[x]}$, so ${\displaystyle {\bar {x}}_{\mathrm {jack} }}$ is unbiased, while taking variance we get ${\displaystyle V[{\bar {x}}_{\mathrm {jack} }]=V[{\bar {x}}]=V[x]/n}$. However, these properties do not hold in general for other parameters than the mean.

This simple example for the case of mean estimation is just to illustrate the construction of a jackknife estimator, while the real subtleties (and the usefulness) emerge for the case of estimating other parameters, such as higher moments than the mean or other functionals of the distribution.

${\displaystyle {\bar {x}}_{\mathrm {jack} }}$ could be used to construct an empirical estimate of the bias of ${\displaystyle {\bar {x}}}$, namely ${\displaystyle {\widehat {\operatorname {bias} }}({\bar {x}})_{\mathrm {jack} }=c({\bar {x}}_{\mathrm {jack} }-{\bar {x}})}$ with some suitable factor ${\displaystyle c>0}$, although in this case we know that ${\displaystyle {\bar {x}}_{\mathrm {jack} }={\bar {x}}}$ so this construction does not add any meaningful knowledge, but it gives the correct estimation of the bias (which is zero).

A jackknife estimate of the variance of ${\displaystyle {\bar {x}}}$ can be calculated from the variance of the jackknife replicates ${\displaystyle {\bar {x}}_{(i)}}$:^[3][4]

${\displaystyle {\widehat {\operatorname {var} }}({\bar {x}})_{\mathrm {jack} }={\frac {n-1}{n}}\sum _{i=1}^{n}({\bar {x}}_{(i)}-{\bar {x}}_{\mathrm {jack} })^{2}={\frac {1}{n(n-1)}}\sum _{i=1}^{n}(x_{i}-{\bar {x}})^{2}.}$

The left equality defines the estimator ${\displaystyle {\widehat {\operatorname {var} }}({\bar {x}})_{\mathrm {jack} }}$ and the right equality is an identity that can be verified directly. Then taking expectations we get ${\displaystyle E[{\widehat {\operatorname {var} }}({\bar {x}})_{\mathrm {jack} }]=V[x]/n=V[{\bar {x}}]}$, so this is an unbiased estimator of the variance of ${\displaystyle {\bar {x}}}$.

Estimating the bias of an estimator

The jackknife technique can be used to estimate (and correct) the bias of an estimator calculated over the entire sample.

Suppose ${\displaystyle \theta }$ is the target parameter of interest, which is assumed to be some functional of the distribution of ${\displaystyle x}$. Based on a finite set of observations ${\displaystyle x_{1},...,x_{n}}$, which is assumed to consist of i.i.d. copies of ${\displaystyle x}$, the estimator ${\displaystyle {\hat {\theta }}}$ is constructed:

${\displaystyle {\hat {\theta }}=f_{n}(x_{1},\ldots ,x_{n}).}$

The value of ${\displaystyle {\hat {\theta }}}$ is sample-dependent, so this value will change from one random sample to another.

By definition, the bias of ${\displaystyle {\hat {\theta }}}$ is as follows:

${\displaystyle {\text{bias}}({\hat {\theta }})=E[{\hat {\theta }}]-\theta .}$

One may wish to compute several values of ${\displaystyle {\hat {\theta }}}$ from several samples, and average them, to calculate an empirical approximation of ${\displaystyle E[{\hat {\theta }}]}$, but this is impossible when there are no "other samples" when the entire set of available observations ${\displaystyle x_{1},...,x_{n}}$ was used to calculate ${\displaystyle {\hat {\theta }}}$. In this kind of situation the jackknife resampling technique may be of help.

We construct the jackknife replicates:

${\displaystyle {\hat {\theta }}_{(1)}=f_{n-1}(x_{2},x_{3}\ldots ,x_{n})}$

${\displaystyle {\hat {\theta }}_{(2)}=f_{n-1}(x_{1},x_{3},\ldots ,x_{n})}$

${\displaystyle \vdots }$

${\displaystyle {\hat {\theta }}_{(n)}=f_{n-1}(x_{1},x_{2},\ldots ,x_{n-1})}$

where each replicate is a "leave-one-out" estimate based on the jackknife subsample consisting of all but one of the data points:

${\displaystyle {\hat {\theta }}_{(i)}=f_{n-1}(x_{1},\ldots ,x_{i-1},x_{i+1},\ldots ,x_{n})\quad \quad i=1,\dots ,n.}$

Then we define their average:

${\displaystyle {\hat {\theta }}_{\mathrm {jack} }={\frac {1}{n}}\sum _{i=1}^{n}{\hat {\theta }}_{(i)}}$

The jackknife estimate of the bias of ${\displaystyle {\hat {\theta }}}$ is given by:

${\displaystyle {\widehat {\text{bias}}}({\hat {\theta }})_{\mathrm {jack} }=(n-1)({\hat {\theta }}_{\mathrm {jack} }-{\hat {\theta }})}$

and the resulting bias-corrected jackknife estimate of ${\displaystyle \theta }$ is given by:

${\displaystyle {\hat {\theta }}_{\text{jack}}^{*}={\hat {\theta }}-{\widehat {\text{bias}}}({\hat {\theta }})_{\mathrm {jack} }=n{\hat {\theta }}-(n-1){\hat {\theta }}_{\mathrm {jack} }.}$

This removes the bias in the special case that the bias is ${\displaystyle O(n^{-1})}$ and reduces it to ${\displaystyle O(n^{-2})}$ in other cases.^[2]

Estimating the variance of an estimator

The jackknife technique can be also used to estimate the variance of an estimator calculated over the entire sample.

See also

• Leave-one-out error

Literature

• Berger, Y.G. (2007). "A jackknife variance estimator for unistage stratified samples with unequal probabilities". Biometrika. 94 (4): 953–964. doi:10.1093/biomet/asm072.
• Berger, Y.G.; Rao, J.N.K. (2006). "Adjusted jackknife for imputation under unequal probability sampling without replacement". Journal of the Royal Statistical Society, Series B. 68 (3): 531–547. doi:10.1111/j.1467-9868.2006.00555.x.
• Berger, Y.G.; Skinner, C.J. (2005). "A jackknife variance estimator for unequal probability sampling". Journal of the Royal Statistical Society, Series B. 67 (1): 79–89. doi:10.1111/j.1467-9868.2005.00489.x.
• Jiang, J.; Lahiri, P.; Wan, S-M. (2002). "A unified jackknife theory for empirical best prediction with M-estimation". The Annals of Statistics. 30 (6): 1782–810. doi:10.1214/aos/1043351257.
• Jones, H.L. (1974). "Jackknife estimation of functions of stratum means". Biometrika. 61 (2): 343–348. doi:10.2307/2334363. JSTOR 2334363.
• Kish, L.; Frankel, M.R. (1974). "Inference from complex samples". Journal of the Royal Statistical Society, Series B. 36 (1): 1–37.
• Krewski, D.; Rao, J.N.K. (1981). "Inference from stratified samples: properties of the linearization, jackknife and balanced repeated replication methods". The Annals of Statistics. 9 (5): 1010–1019. doi:10.1214/aos/1176345580.
• Quenouille, M.H. (1956). "Notes on bias in estimation". Biometrika. 43 (3–4): 353–360. doi:10.1093/biomet/43.3-4.353.
• Rao, J.N.K.; Shao, J. (1992). "Jackknife variance estimation with survey data under hot deck imputation". Biometrika. 79 (4): 811–822. doi:10.1093/biomet/79.4.811.
• Rao, J.N.K.; Wu, C.F.J.; Yue, K. (1992). "Some recent work on resampling methods for complex surveys". Survey Methodology. 18 (2): 209–217.
• Shao, J. and Tu, D. (1995). The Jackknife and Bootstrap. Springer-Verlag, Inc.
• Tukey, J.W. (1958). "Bias and confidence in not-quite large samples (abstract)". The Annals of Mathematical Statistics. 29 (2): 614.
• Wu, C.F.J. (1986). "Jackknife, Bootstrap and other resampling methods in regression analysis". The Annals of Statistics. 14 (4): 1261–1295. doi:10.1214/aos/1176350142.

Notes

References

• Cameron, Adrian; Trivedi, Pravin K. (2005). Microeconometrics : methods and applications. Cambridge New York: Cambridge University Press. ISBN 9780521848053.
• Efron, Bradley; Stein, Charles (May 1981). "The Jackknife Estimate of Variance". The Annals of Statistics. 9 (3): 586–596. doi:10.1214/aos/1176345462. JSTOR 2240822.
• Efron, Bradley (1982). The jackknife, the bootstrap, and other resampling plans. Philadelphia, PA: Society for Industrial and Applied Mathematics. ISBN 9781611970319.
• Quenouille, Maurice H. (September 1949). "Problems in Plane Sampling". The Annals of Mathematical Statistics. 20 (3): 355–375. doi:10.1214/aoms/1177729989. JSTOR 2236533.
• Quenouille, Maurice H. (1956). "Notes on Bias in Estimation". Biometrika. 43 (3–4): 353–360. doi:10.1093/biomet/43.3-4.353. JSTOR 2332914.
• Tukey, John W. (1958). "Bias and confidence in not quite large samples (abstract)". The Annals of Mathematical Statistics. 29 (2): 614. doi:10.1214/aoms/1177706647.