Lancia V6 engine
Overview
ManufacturerLancia
Production19501970
Layout
ConfigurationNaturally aspirated 60° V6
Displacement1.8 L; 107.0 cu in (1,754 cc)
2.0 L; 121.5 cu in (1,991 cc)
2.3 L; 138.3 cu in (2,266 cc)
2.5 L; 149.6 cu in (2,451 cc)
2.5 L; 150.0 cu in (2,458 cc)
2.8 L; 169.3 cu in (2,775 cc)
Cylinder bore70 mm (2.76 in)
72 mm (2.83 in)
78 mm (3.07 in)
80 mm (3.15 in)
85 mm (3.35 in)
Piston stroke76 mm (2.99 in)
81.5 mm (3.21 in)
85.5 mm (3.37 in)
82 mm (3.23 in)
Cylinder block materialLight alloy[1]
Cylinder head materialAluminium alloy[1]
ValvetrainOHV 2 valves x cyl.
Combustion
Fuel systemCarburetor
Fuel typePetrol
Cooling systemWater-cooled
Output
Power output56–152 hp (42–113 kW; 57–154 PS)

In 1950, Lancia introduced one of the world's first production V6 engines in the Lancia Aurelia.[1] The engine was the work of Francesco De Virgilio and was developed to solve the vibration problems Lancia had experienced with its V4 engines. This was achieved by setting the vee angle to 60 degrees. It remained in production through 1970. Lancia used V6 engines in road and sports cars, the D20 had a 60 degree quad cam V6 2962 cc 217 bhp (162 kW; 220 PS) engine and the D24 3300 cc V6 engine.[2]

Aurelia

The first-generation Aurelia engines were produced from 1950 through 1967.

1800

The 1.8 L; 107.0 cu in (1,754 cc) 1800 was the first V6. Bore and stroke was 70 mm × 76 mm (2.76 in × 2.99 in).[3]

2000

The engine was expanded to 2.0 L; 121.5 cu in (1,991 cc) for 1951's B21 Aurelia. Bore and stroke was 72 mm × 81.5 mm (2.83 in × 3.21 in).

2300

A 2.3 L; 138.3 cu in (2,266 cc) version was also produced.

2500

The largest of the original Aurelia engines was the 2.5 L; 149.6 cu in (2,451 cc) 2500 introduced in 1953. It was still undersquare at 78 mm × 85.5 mm (3.07 in × 3.37 in) bore and stroke.

Flaminia

The engine's severe undersquare design was addressed for the 1957 Flaminia version. This lasted in production through 1970.

2500

The new engine displaced 2.5 L; 150.0 cu in (2,458 cc) from a much less undersquare 80 mm × 82 mm (3.15 in × 3.23 in) bore and stroke.

2800

The final version was the 2.8 L; 169.3 cu in (2,775 cc) engine. Bore was now 85 mm (3.35 in) and stroke remained at 82 mm (3.23 in) as in the 2500.

Later V6-engined Lancias

Later Lancias were powered by V6 engines designed by other manufacturers, with the Ferrari Dino V6 powering the Stratos, the PRV V6 powering early Themas, the Alfa Romeo Busso V6 powering later versions of the Thema, and versions of the Kappa and Thesis and the Chrysler Pentastar V6 in the badge-engineered 300C-based Thema.

Notes

  1. 1 2 3 "Lancia Coupés & Convertibles". ritzsite.net. Retrieved 2007-09-15.
  2. "Lancia Heritage". uniquecarsandparts.com.au. Retrieved 2007-09-15.
  3. "Lancia Aurelia: B10 engine".
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.