Movable cellular automaton method
modeling of contact interaction
Animation of a movable cellular automaton being used to simulate friction at the interface between two surfaces
Method type
Continuous/DiscreteDiscrete
Analytical/ComputationalComputational
Characteristics
Influenced bycellular automaton, discrete element
Method incomputational solid mechanics

The movable cellular automaton (MCA) method is a method in computational solid mechanics based on the discrete concept. It provides advantages both of classical cellular automaton and discrete element methods. One important advantage[1] of the MCA method is that it permits direct simulation of material fracture, including damage generation, crack propagation, fragmentation, and mass mixing. It is difficult to simulate these processes by means of continuum mechanics methods (For example: finite element method, finite difference method, etc.), so some new concepts like peridynamics are required. Discrete element method is very effective to simulate granular materials, but mutual forces among movable cellular automata provides simulating solids behavior. As the cell size of the automaton approaches zero, MCA behavior approaches classical continuum mechanics methods.[2] The MCA method was developed in the group of S.G. Psakhie [3]

Keystone of the movable cellular automaton method

Object (at left) is described as set of interacted automata (at center). At right is shown velocity field of automata.

In framework of the MCA approach an object under modeling is considered as a set of interacting elements/automata. The dynamics of the set of automata are defined by their mutual forces and rules for their relationships. This system exists and operates in time and space. Its evolution in time and space is governed by the equations of motion. The mutual forces and rules for inter-elements relationships are defined by the function of the automaton response. This function has to be specified for each automaton. Due to mobility of automata the following new parameters of cellular automata have to be included into consideration: Ri radius-vector of automaton; Vi velocity of automaton; ωi rotation velocity of automaton; θi rotation vector of automaton; mi mass of automaton; Ji moment of inertia of automaton.

New concept: neighbours

Each automaton has some neighbors

The new concept of the MCA method is based on the introducing of the state of the pair of automata (relation of interacting pairs of automata) in addition to the conventional one the state of a separate automaton. Note that the introduction of this definition allows to go from the static net concept to the concept of neighbours. As a result of this, the automata have the ability to change their neighbors by switching the states (relationships) of the pairs.

Definition of the parameter of pair state

The introducing of new type of states leads to new parameter to use it as criteria for switching relationships. It is defined as an automaton overlapping parameters hij. So the relationship of the cellular automata is characterised by the value of their overlapping.

The initial structure is formed by setting up certain relationships among each pair of neighboring elements.

Criterion of switching of the state of pair relationships

At left pair of automata ij is linked. At right pair of automata ij is unlinked.

In contrast to the classical cellular automaton method in the MCA method not only a single automaton but also a relationship of pair of automata can be switched. According with the bistable automata concept there are two types of the pair states (relationships):

linked – both automata belong to a solid
unlinked – each automaton of the pair belongs to different bodies or parts of damaged body.

So the changing of the state of pair relationships is controlled by relative movements of the automata and the media formed by such pairs can be considered as bistable media.

Equations of MCA motion

The evolution of MCA media is described by the following equations of motion for translation:

Forces between automata ij coming from their neighbors.

Here is the mass of automaton , is central force acting between automata and , is certain coefficient associated with transferring the h parameter from pair ij to pair ik, is the angle between directions ij and ik.

Due to finite size of movable automata the rotation effects have to be taken into account. The equations of motion for rotation can be written as follows:

Here Θij is the angle of relative rotation (it is a switching parameter like hij for translation), qij is the distance from center of automaton i to contact point of automaton j (moment arm), τij is the pair tangential interaction, is certain coefficient associated with transferring the Θ parameter from one pair to other (it is similar to from the equation for translation).

These equations are completely similar to the equations of motion for the manyparticle approach.

Definition of deformation in pair of automata

Rotation of body as whole not caused to deformation in pair of automata

Translation of the pair automata The dimensionless deformation parameter for translation of the i j automata pair can be presented as:

In this case:

where Δt time step, Vnij relative velocity.

Rotation of the pair automata can be calculated by analogy with the last translation relationships.

Modeling of irreversible deformation in the MCA method

Deformation is determine by value of distance from the center of automaton
There are two types of the response function of automata

The εij parameter is used as a measure of deformation of automaton i under its interaction with automaton j. Where qij is a distance from the center of automaton i to its contact point with automaton j; Ri = di/2 (di is the size of automaton i).

As an example the titanium specimen under cyclic loading (tension compression) is considered. The loading diagram is shown in the next figure:

Scheme of loading Loading diagram
(Red marks are the experimental data)

Advantages of MCA method

Due to mobility of each automaton the MCA method allows to take into account directly such actions as:

  • mass mixing
  • penetration effects
  • chemical reactions
  • intensive deformation
  • phase transformations
  • accumulation of damages
  • fragmentation and fracture
  • cracks generation and development

Using boundary conditions of different types (fixed, elastic, viscous-elastic, etc.) it is possible to imitate different properties of surrounding medium, containing the simulated system. It is possible to model different modes of mechanical loading (tension, compression, shear strain, etc.) by setting up additional conditions at the boundaries.

See also

References

  1. Psakhie, S. G.; Horie, Y.; Korostelev, S. Yu.; Smolin, A. Yu.; Dmitriev, A. I.; Shilko, E. V.; Alekseev, S. V. (1995-11-01). "Method of movable cellular automata as a tool for simulation within the framework of mesomechanics". Russian Physics Journal. 38 (11): 1157–1168. Bibcode:1995RuPhJ..38.1157P. doi:10.1007/BF00559396. S2CID 120300401.
  2. Popov, V.L., Psakhie S.G. (2001). "Theoretical principles of modelling elastoplastic media by moveable cellular automata method. I: Homogenous media". Phys. Mesomechanics. 4: 16–25.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  3. Shilko, Evgeny V.; Popov, Valentin L.; Vasiljeva, Olga S.; Ostermeyer, Georg-Peter (2021), Ostermeyer, Georg-Peter; Popov, Valentin L.; Shilko, Evgeny V.; Vasiljeva, Olga S. (eds.), "In Memory of Sergey G. Psakhie", Multiscale Biomechanics and Tribology of Inorganic and Organic Systems: In memory of Professor Sergey Psakhie, Springer Tracts in Mechanical Engineering, Cham: Springer International Publishing, pp. 1–23, doi:10.1007/978-3-030-60124-9_1, ISBN 978-3-030-60124-9

Software

  • MCA software package
  • Software for simulation of materials in discrete-continuous approach «FEM+MCA»: Number of state registration in Applied Research Foundation of Algorithms and Software (AFAS): 50208802297 / Smolin A.Y., Zelepugin S.A., Dobrynin S.A.; applicant and development center is Tomsk State University. – register date 28.11.2008; certificate AFAS N 11826 date 01.12.2008.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.