New York and Canada Railroad
Overview
Founders
Predecessors
SuccessorDelaware and Hudson Railway
Technical
Track gauge1,435 mm (4 ft 8+12 in)
Route map

mi
M&NY
Rouses Point Subdivision
Rouses Point Junction
Mooers Junction
21
191
Rouses Point
187
Cooperville
Sciota
15
184
Chazy
Chazy Junction
177
West Chazy
172
Beekmantown
168
0
Plattsburgh
6
Salmon River
9
Lapham's
11
Peru
15
Harkness
18
Ferrona
23
Ausable Forks
155
Port Kent
143
Willsborough
138
Essex
134
Whallonsburg
131
Wadahm's Mills
128
Westport
117
Port Henry
110
Crown Point
102
Addison Junction
Addison Railroad
5
Baldwin
2
Ticonderoga
Ticonderoga Junction
0
100
Fort Ticonderoga
98
Wrights
93
Putnam
88
Dresden
85
Clemons
78
Whitehall

The New York and Canada Railroad was a railway company that operated in the state of New York between 1873 and 1908. It was established to consolidate existing companies in the northern part of the state and to complete a north–south railway line along the west side of Lake Champlain. Through service to Plattsburgh, New York, began in 1875, and the company later extended further north to Rouses Point, New York (1876), and to the Canadian border (1906). Always under Delaware and Hudson Railway control, the company was formally merged in 1908. Today, the Lake Champlain line is part of the Canadian Pacific Kansas City's Canadian Subdivision.

History

The backers of the Whitehall and Plattsburgh Railroad had attempted to establish a railway line along the west side of Lake Champlain via the Ausable River valley.[1] The effort sputtered out in 1870–1871, leaving two disconnected railway lines: a 21-mile (34 km) line between Plattsburgh, New York, and Ausable, New York, and a 15-mile (24 km) line between Port Henry, New York, and Fort Ticonderoga.[2] The latter had been leased by the Rutland Railroad in an effort to prevent the creation of the new route.[3]

This setback proved temporary. New York State Assemblyman Smith Mead Weed, and Rensselaer and Saratoga Railroad president Isaac V. Baker, persuaded the Delaware and Hudson Railway to back a new effort to build the line.[4] The first New York and Canada Railroad was incorporated on March 16, 1872, and the consolidated with the Whitehall and Plattsburgh and Montreal and Plattsburgh Railroads on April 15, 1873, to form the second New York and Canada Railroad.[5]

The New York and Canada eschewed the Ausable River route of the White and Plattsburgh in favor of a more direct route that followed the Lake Champlain coast. The company completed the 24-mile (39 km) line between Whitehall and Addison Junction on November 30, 1874.[6] The difficult terrain between Port Henry and Plattsburgh required an additional year and that part of the line opened on November 29, 1875.[7] The Whitehall and Plattsburgh Railroad line to Ausable was retained as a branch. To reach Montreal, trains used the former Montreal and Plattsburgh Railroad line between Plattsburgh and Mooers, New York, then the Ogdensburg and Lake Champlain Railroad from Mooers to Rouses Point, New York, and then the tracks of Grand Trunk Railway.[8]

The New York and Canada constructed a 13-mile (21 km) line from Chazy, New York, to Rouses Point, eliminating the need to run via Mooers and the Ogdensburg and Lake Champlain Railroad. This line opened on September 18, 1876.[9][lower-alpha 1] The New York and Canada also constructed a short, 5-mile (8.0 km) branch through Ticonderoga, New York, to Baldwin, on the north end of Lake George. This line opened in May 1875.[10][12]

A final shortening of the route to Montreal occurred with the building of the Napierville Junction Railway and subsequent D&H control. The Napierville Junction Railway, incorporated in 1906, built a 27 miles (43 km) line from the Canadian border near Rouses Point north to Delson and a junction with the Canadian Pacific Railway. The New York and Canada built a 1.1 miles (1.8 km) connection up to the border. The new route opened on May 20, 1907.[lower-alpha 2] The D&H merged the New York and Canada on May 23, 1908.[12]

Lines

The main line of the New York and Canada Railroad ran from Whitehall, New York, to the Canadian border via Plattsburgh and Rouses Point. This line forms the major part of the Canadian Pacific Kansas City's Canadian Subdivision.[16] In addition, the company had three branches:

  • the Ausable Branch, the original line of the Whitehall and Plattsburgh south from Plattsburgh. It was abandoned in 1981.[17]
  • the Baldwin Branch, running 5 miles (8.0 km) from Montcalm Landing on the main line to Baldwin on Lake George. A short line built by the Ticonderoga Railroad branched off to serve Ticonderoga proper.
  • the Mooers Branch, the original line of the Montreal and Plattsburgh from Plattsburgh to the Canadian border. Its importance lessened when the Rouses Point cutoff opened, and it was abandoned in 1925.[11][18]

Notes

  1. Shaughnessy gives the date as "by the end of November"; the ICC valuation report says "about July 1, 1876."[10][11]
  2. The D&H obtained full stock control of the Napierville Junction Railway from operation, but did not, contra Shaughnessy, acquire the company outright.[13][14][15]

Footnotes

  1. Shaughnessy (1997), p. 137.
  2. ICC (1927), p. 718.
  3. Shaughnessy (1997), pp. 139–140.
  4. Waller (1994), pp. 183–184.
  5. ICC (1927), pp. 678–679.
  6. Shaughnessy (1997), p. 147.
  7. Shaughnessy (1997), pp. 149, 151.
  8. Shaughnessy (1997), p. 151.
  9. "Untitled". Rutland Daily Globe. September 20, 1876. p. 3. Retrieved May 21, 2023 via Newspapers.com.
  10. 1 2 Shaughnessy (1997), p. 169.
  11. 1 2 ICC (1927), p. 712.
  12. 1 2 ICC (1927), p. 711.
  13. Poor (1914), p. 188.
  14. Shaughnessy (1997), p. 226.
  15. ICC (1927), p. 693.
  16. Roberts & Stremes (2023), p. 14-119.
  17. Sherman, Chip (August 7, 1981). "Abandoned rails to be removed". Press-Republican. Retrieved May 23, 2023.
  18. Shaughnessy (1997), p. 307.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.