Pennsylvania Route 963 marker

Pennsylvania Route 963

Route information
Maintained by Pennsylvania Department of Highways
Length3.95 mi (6.36 km)
Existed1928[1]–1946[2]
Major junctions
South end US 6 / US 209 in Matamoras
North endEnd of designation at the community of Millrift
Location
CountryUnited States
StatePennsylvania
CountiesPike
Highway system
PA 962 PA 964

Pennsylvania Route 963 was a 3.95-mile (6.36 km) long state highway located in Pike County. The route began at an intersection with U.S. Route 6 and U.S. Route 209 in the Borough of Matamoras, which is settled on the New York state line. PA 963 continued northward for the length of Mill Rift Road up to the community of Millrift, Pennsylvania, where the designation ended. The route was assigned in the 1928 numbering of state highways in the commonwealth and was decommissioned eighteen years later. The designation was later replaced by Pike County Quadrant Route 1017, which heads along the same alignment as PA 963. Geographically, PA 963 and current day 1017 are the easternmost state highways in Pennsylvania.[3]

Route description

Delaware Drive entering Westfall Township
  • Note: This route description is written as the highway that currently runs along this alignment.

The alignment of Pennsylvania Route 963 began at an intersection with U.S. Route 6 and U.S. Route 209 (Pennsylvania Avenue) at the Mid-Delaware Bridge in the Borough of Matamoras. The current designation, Quadrant Route 1017, heads northward along Mill Rift Road (known in Matamoras as Delaware Drive), intersecting with several local roads. The route is mainly residential while in Matamoras itself, and after the intersection with Avenue C, the route turns out of Matamoras and enters Westfall Township, following the shores of the Delaware River. The route continues northward, intersecting with Quadrant Route 1015, which heads eastward.

Delaware Drive entering the community of Millrift

Along the shores of the Delaware, QR 1017 passes through a moderate development. At an intersection with Decker Lane, the highway turns to the north, and the development along the highway begins to lessen. After LaBarr Lane, Route 1017 turns northward, and at a bend on the Delaware, the highway turns westward. The development lessens further, and the route begins to head through the nearby hills. Along the base of the mountain, the route continues northward and into the community of Millrift, where the PA 963 designation terminated.[3] The current day designation, Quadrant Route 1017, continues into the community itself.[4]

History

Pennsylvania Route 963 was assigned onto the MatamorasMill Rift alignment of Mill Rift Road in the 1928 mass commissioning of state highways in the commonwealth.[1] The route was, at the time, the easternmost traffic route in the entire state.[3] However, the route, like many of its kind, was decommissioned after eighteen years, when the Pennsylvania Department of Highways removed the PA 963 designation from the highway.[2] Currently, the alignment of PA 963 is an alignment of Pike County Quadrant Route 1017 from Matamoras to the designation end north of Millrift. The route continues northward as Bluestone Boulevard, aka Westfall Township Road 446.[4]

Major intersections

The entire route was in Pike County.

LocationmikmDestinationsNotes
Matamoras0.000.00 US 6 / US 209
Millrift3.956.36Designation ends at the borough
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1 2 Map Showing Pennsylvania State Highways (Map). Pennsylvania Department of Highways. 1928.
  2. 1 2 Pennsylvania Official Road Map (Map). Pennsylvania Department of Highways. 1946.
  3. 1 2 3 Pennsylvania Official Road Map (Map). Pennsylvania Department of Highways. 1940.
  4. 1 2 "Westfall Township, Pennsylvania" (PDF). Pennsylvania Department of Transportation. 2009. p. 1. Retrieved June 11, 2009.
Template:Attached KML/Pennsylvania Route 963
KML is from Wikidata
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.