PolyDADMAC
Names
Other names
Poly(dimethyldiallylammonium chloride); Polyquaternium-6
Identifiers
ChemSpider
  • None
ECHA InfoCard 100.130.940
EC Number
  • 230-993-8
UNII
Properties
(C8H16NCl)n
Molar mass Variable
Soluble
Hazards
GHS labelling:
GHS09: Environmental hazard
Warning
H410, H412
P273, P391, P501
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Polydiallyldimethylammonium chloride (shortened polyDADMAC or polyDDA), also commonly polyquaternium-6, is a homopolymer of diallyldimethylammonium chloride (DADMAC). The molecular weight of polyDADMAC is typically in the range of hundreds of thousands of grams per mole, and even up to a million for some products. PolyDADMAC is usually delivered as a liquid concentrate having a solids level in the range of 10 to 50%. It is a high charge density cationic polymer. The charge density makes it well suited for flocculation. Actually, pDADMAC or DMDAAC, is used as a coagulant - a charge neutralization process that precedes flocculation.

History

PolyDADMAC polymers were first prepared and studied in 1957 by Professor George Butler at the University of Florida.[1] It was remarkable as it was soluble in water in contrast at the time to other known synthetic polymers formed by polymerization of monomers containing more than one vinyl functionality. The structure and reaction path was determined in 2002 with NMR studies. Much of what we know about pDADMAC in water treatment and personal care is from Dr Jerry Boothe of Calgon Corp.

Synthesis

The monomer DADMAC is formed by reacting two equivalents of allyl chloride with dimethylamine. PolyDADMAC is then synthesized by radical polymerization of DADMAC with an organic peroxide used as a catalyst. Two polymeric structures are possible when polymerizing DADMAC: N-substituted piperidine structure or N-substituted pyrrolidine structure. The pyrrolidine structure is favored.[2]

Polymerization of PolyDADMAC (shown as favoured pyrrolidine structure)

Applications

Effluent treatment

PolyDADMAC is used in waste water treatment as a primary organic coagulant which neutralizes negatively charged colloidal material and reduces sludge volume compared with inorganic coagulants.

Pulp and paper industry

PolyDADMAC is used for controlling disturbing substances in the papermaking process. It provides superior fixing of pitch from mechanical pulp and of latex from coated broke. Used in the short circulation of a paper mill to enhance retention and dewatering. In addition, it can be used to improve the efficiency of disk filters and flotators, and for cationization of fillers to provide maximal filler retention.

Water purification

PolyDADMAC is used as a coagulant in water purification. It is effective in coagulating and flocculating inorganic and organic particles such as silt, clay, algae, bacteria and viruses. At high concentrations the organic polymer can remove natural organic matter such as humic and fulvic acids resulting in fewer disinfection byproduct precursors and less color.[3]

References

  1. G. B. Butler, R. J. Angelo: J. Am. Chem. Soc., 79, 3128 (1957)
  2. John, Wilson; et al. (2002), Synthesis and Use of PolyDADMAC for Water Purification (PDF), archived from the original (PDF) on 2011-07-19, retrieved 2009-01-05
  3. Edzwald, James K., ed. (2011). Water Quality and Treatment. 6th Edition. New York:McGraw-Hill. p. 8.64. ISBN 978-0-07-163011-5
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.