Renewable Thermal
TypeEnergy
Working principleThermodynamics
First production 1800s

Renewable thermal energy is the technology of gathering thermal energy from a renewable energy source for immediate use or for storage in a thermal battery for later use.

The most popular form of renewable thermal energy is the sun and the solar energy is harvested by solar collectors to heat water, buildings, pools and various processes. Another example of Renewable Thermal is a Geothermal or ground source Heat Pump (GHP) system, where thermal stored in the ground from the summer is extracted from the ground to heat a building in another season. This example system is "renewable" because the source of excess heat energy is a reliably recurring process that occurs each summer season.

History of Renewable Thermal Systems

Solar energy has been in use for centuries for heating dwellings and to produce hot water before low cost natural gas was discovered. It gained attention during and after the oil embargo of 1973 as engineers investigated ways to produce thermal energy from a renewable source instead of fossil fuels.

The history of utilizing the ground as a heat source is more recent and has gained prominence in recent years especially in rural areas where natural gas heating may not be available. The outer crust of the Earth is a Thermal Battery that maintains a median temperature which is the same as the average air temperature at that location. This "average ground temperature" is a combination in balance of solar gain from the sun, thermal gain from the core of the earth, and heat loss due to conduction, evaporation, and radiation. The graphic at the right shows a map of the "average ground temperature" at locations within the United States.[1]

Types

Solar-based Renewable Thermal

Roof-mounted close-coupled thermosiphon solar water heater.
The first three units of Solnova in the foreground, with the two towers of the PS10 and PS20 solar power stations in the background.

Solar thermal energy (STE) is a form of energy and a technology for harnessing solar energy to generate thermal energy for use in industry, and in the residential and commercial sectors.

Solar thermal collectors are classified by the United States Energy Information Administration as low-, medium-, or high-temperature collectors. Low-temperature collectors are generally unglazed and used to heat swimming pools or to heat ventilation air. Medium-temperature collectors are also usually flat plates but are used for heating water or air for residential and commercial use.

High-temperature collectors concentrate sunlight using mirrors or lenses and are generally used for fulfilling heat requirements up to 300 deg C / 20 bar pressure in industries, and for electric power production. Two categories include Concentrated Solar Thermal (CST) for fulfilling heat requirements in industries, and Concentrated Solar Power (CSP) when the heat collected is used for electric power generation. CST and CSP are not replaceable in terms of application.

The largest facilities are located in the American Mojave Desert of California and Nevada. These plants employ a variety of different technologies. The largest examples include, Ouarzazate Solar Power Station in Morocco (510 MW), Ivanpah Solar Power Facility (377 MW), Solar Energy Generating Systems installation (354 MW), and Crescent Dunes (110 MW). Spain is the other major developer of solar thermal power plants. The largest examples include, Solnova Solar Power Station (150 MW), the Andasol solar power station (150 MW), and Extresol Solar Power Station (100 MW).

Ground-based Renewable Thermal

A qanat and windcatcher used as an earth duct, for both earth coupling and evaporative cooling. No fan is needed; the suction in the lee of the windtower draws the air up and out.

A ground-coupled heat exchanger is an underground heat exchanger that can capture heat from and/or dissipate heat to the ground. They use the Earth's near constant subterranean temperature to warm or cool air or other fluids for residential, agricultural or industrial uses. If building air is blown through the heat exchanger for heat recovery ventilation, they are called earth tubes (or Canadian well, Provençal well, Solar chimney, also termed earth cooling tubes, earth warming tubes, earth-air heat exchangers (EAHE or EAHX), air-to-soil heat exchanger, earth channels, earth canals, earth-air tunnel systems, ground tube heat exchanger, hypocausts, subsoil heat exchangers, thermal labyrinths, underground air pipes, and others).

Earth tubes are often a viable and economical alternative or supplement to conventional central heating or air conditioning systems since there are no compressors, chemicals or burners and only blowers are required to move the air. These are used for either partial or full cooling and/or heating of facility ventilation air. Their use can help buildings meet Passive House standards or LEED certification.

Earth-air heat exchangers have been used in agricultural facilities (animal buildings) and horticultural facilities (greenhouses) in the United States of America over the past several decades and have been used in conjunction with solar chimneys in hot arid areas for thousands of years, probably beginning in the Persian Empire. Implementation of these systems in India as well as in the cooler climates of Austria, Denmark and Germany to preheat the air for home ventilation systems has become fairly common since the mid-1990s, and is slowly being adopted in North America.

Ground-coupled heat exchanger may also use water or antifreeze as a heat transfer fluid, often in conjunction with a geothermal heat pump. See, for example downhole heat exchangers. The rest of this article deals primarily with earth-air heat exchangers or earth tubes.

Season thermal energy storage

Seasonal thermal energy storage (STES), also known as inter-seasonal thermal energy storage,[2] is the storage of heat or cold for periods of up to several months. The thermal energy can be collected whenever it is available and be used whenever needed, such as in the opposing season. For example, heat from solar collectors or waste heat from air conditioning equipment can be gathered in hot months for space heating use when needed, including during winter months. Waste heat from industrial process can similarly be stored and be used much later[3] or the natural cold of winter air can be stored for summertime air conditioning.[4][5]

STES stores can serve district heating systems, as well as single buildings or complexes. Among seasonal storages used for heating, the design peak annual temperatures generally are in the range of 27 to 80 °C (81 to 180 °F), and the temperature difference occurring in the storage over the course of a year can be several tens of degrees. Some systems use a heat pump to help charge and discharge the storage during part or all of the cycle. For cooling applications, often only circulation pumps are used.

Examples for district heating include Drake Landing Solar Community where ground storage provides 97% of yearly consumption without heat pumps,[6]

and Danish pond storage with boosting.[7]

Policy by geography

New York State

The state of New York took a big step in September 2015 when it created a new office titled Director of Renewable Thermal.[8] The NY Director of Renewable Thermal will oversee a team to help companies develop and implement renewable, low-carbon cooling and heating systems. NY State considers this initiative a critical component of NYSERDA's strategy to enable net-zero energy buildings, which produce the same amount of energy as they consume.[8] It also will further advance New York's progress toward creating self-sustaining energy markets for clean, renewable technologies.[8]

Renewable Thermal has been a core resource in many states Renewable Portfolio Standards.[9] The report says: "State Renewable Portfolio Standard (RPS) programs have historically focused on electricity generation. However, some states have started incorporating renewable thermal power for heat generation into their RPS as a way to support the development and market growth of solar thermal, biomass thermal, geothermal, and other renewable thermal technologies." The plan focuses on "Renewable thermal energy has many of the same benefits as other renewable technologies, including improved air quality, economic development and job creation, and the promotion of regional energy security." An industry public described on-site combustion as :responsible for 35 percent of fossil fuel greenhouse gas emissions in New York State. "[10]

See also

References

  1. , US Average Ground Temperature Map
  2. Wong, Bill; Snijders, Aart; McClung, Larry (2006). "Recent Inter-seasonal Underground Thermal Energy Storage Applications in Canada". 2006 IEEE EIC Climate Change Conference. EIC Climate Change Technology, 2006 IEEE. pp. 1–7. doi:10.1109/EICCCC.2006.277232. ISBN 1-4244-0218-2. S2CID 8533614.
  3. Andersson, O.; Hägg, M. (2008), "Deliverable 10 - Sweden - Preliminary design of a seasonal heat storage for ITT Flygt, Emmaboda, Sweden" (PDF), Deliverable 10 - Sweden - Preliminary design of a seasonal heat storage for ITT Flygt, Emmaboda, Sweden, IGEIA – Integration of geothermal energy into industrial applications, pp. 38–56 and 72–76, archived from the original (PDF) on 11 April 2020, retrieved 21 April 2013
  4. Paksoy, H.; Snijders, A.; Stiles, L. (2009), "Aquifer Thermal Energy Cold Storage System at Richard Stockton College" (PDF), Aquifer Thermal Energy Cold Storage System at Richard Stockton College, EFFSTOCK 2009 (11th International) - Thermal Energy Storage for Efficiency and Sustainability, Stockholm, archived from the original (PDF) on 12 January 2014, retrieved 22 April 2013{{citation}}: CS1 maint: location missing publisher (link)
  5. Gehlin, S.; Nordell, B. (1998), "Thermal Response test-In situ measurements of Thermal Properties in hard rock" (PDF), Thermal Response test-In situ measurements of Thermal Properties in hard rock, Avdelningen för vattenteknik. Luleå, Luleå Tekniska Universitet
  6. Wong, Bill (June 28, 2011), "Drake Landing Solar Community" (PDF), Drake Landing Solar Community, IDEA/CDEA District Energy/CHP 2011 Conference, Toronto, pp. 1–30, archived from the original (PDF) on 10 September 2016, retrieved 21 April 2013
  7. Wittrup, Sanne (14 June 2015). "Verdens største damvarmelager indviet i Vojens". Ingeniøren. Archived from the original on 19 October 2015.
  8. 1 2 3 , NYSERDA Announces Donovan Gordon to Lead Effort to Expand Renewable Cooling and Heating Markets in New York, September 16, 2015
  9. , Renewable Thermal in State Renewable Portfolio Standards, April 2015
  10. , New Bills May Be Game Changer for New York Geothermal, September 15, 2015
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.