RP-2
Role Glider
National origin United States
Manufacturer Rensselaer Polytechnic Institute
Designer Steven J. Winckler
First flight 1985
Status Production completed
Number built 1

The Rensselaer RP-2 (for Rensselaer Polytechnic design 2) is an American mid-wing, single-seat glider that was designed by Steven J. Winckler and produced by the Rensselaer Polytechnic Institute of Troy, New York.[1][2]

Design and development

The RP-2 was the second aircraft in Rensselaer's Composite Aircraft Program and first flew in 1985.[1]

The aircraft is of mixed construction, made from carbon-fiber-reinforced polymer, Kevlar and fiberglass. Its 44.25 ft (13.5 m) span wing employs a Boeing 80-163 airfoil and features split flaps. The aircraft weighs just 273 lb (124 kg) empty. The landing gear consists of a conventional glider-style monowheel. The aircraft achieved a 29:1 glide ratio.[1][3]

Operational history

Initially registered with the Federal Aviation Administration in the Experimental - Amateur-built category, by August 2011 the sole RP-2 built had been removed from the registry.[2]

Specifications (RP-2)

Data from Sailplane Directory[1]

General characteristics

  • Crew: one
  • Wingspan: 44 ft 3 in (13.49 m)
  • Wing area: 120 sq ft (11 m2)
  • Aspect ratio: 16.4:1
  • Airfoil: Boeing 80-163
  • Empty weight: 273 lb (124 kg)
  • Gross weight: 437 lb (198 kg)

Performance

  • Maximum glide ratio: 29:1 at 45 mph (72 km/h)
  • Rate of sink: 136 ft/min (0.69 m/s)
  • Wing loading: 3.64 lb/sq ft (17.8 kg/m2)

See also

Related lists

References

  1. 1 2 3 4 Activate Media (2006). "RP-2 Rensselaer". Archived from the original on September 2, 2012. Retrieved August 24, 2011.
  2. 1 2 Federal Aviation Administration (August 2011). "Make / Model Inquiry Results". Retrieved August 24, 2011.
  3. Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Retrieved August 24, 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.