UCLA Smart Grid Energy Research Center (SMERC)
UCLA Smart Grid Energy Research Center (SMERC) logo
Established2010
DirectorRajit Gadh
Location
Los Angeles
,
California
AffiliationsUCLA
WebsiteOfficial website

The UCLA Smart Grid Energy Research Center (SMERC), located on the University of California Los Angeles (UCLA) campus, is an organization focused on developing the next generation of technologies and innovation for Smart Grid.[1] SMERC partners with government agencies, technology providers, Department of Energy (DOE) research labs, universities, utilities, policymakers, electric vehicle manufacturers, and appliance manufacturers. These partnerships provide SMERC with diverse capabilities and exceptional, mature leadership.[2]

Currently, SMERC is performing research on Microgrids, automated demand response,[3] electric vehicle integration (G2V, or Grid-to-Vehicle and V2G, or Vehicle-to-Grid), Cybersecurity, and distributed and renewable integration.

SMERC has collaborations with USC and Caltech/Jet Propulsion Laboratory (JPL), LADWP in a smart grid demonstration project.[4] Internationally, SMERC has collaborated with the Korea Institute of Energy Research (KIER). This partnership involves SMERC testing and developing software and platforms related to smart grid technology, while KIER focuses on multiple renewable energy technologies, such as solar, wind, and fuel cells, as well as wireless communications and semiconductor systems.[5]

Background

"While the electrical grid in the United States is very reliable, it is currently somewhat limited in its ability to incorporate new renewable energy sources, effectively manage demand response, sense and monitor trouble spots, and repair itself."[6] This reliability will not last if the grid systems stay the same as populations rise and electricity demands rise. This demand calls for innovative technologies and systems to provide and manage demand response, sensory/monitor repair, and self-repair to help stabilize the grid. SMERC has been building these technologies since the fall of 2004. The system also calls for better efficiency among energy generators and savers. Today, the current grid in North America is very old, and in many areas, it is up to 100 years old. The grid is inflexible and must be modernized to handle the intermittency of renewable energy sources (solar power, wind turbines, etc.).[7] These energy sources, if resourced properly, will prove to be valuable to the grid, providing it with energy that is currently wasted. With this electricity demand, there is a tremendous opportunity in the United States for innovation between the current electric grid and the next generations of systems using RFID and Integrated sensors, information, and Wireless technologies.

With awareness in Smart Grid growing, questions about what the new modernized grid will be like are being asked. Unfortunately, there is no clear answer to what the grid will look like. For instance, it is like predicting what an Apple computer would be capable of accomplishing today when the first Apple computer was released in 1976.[8] There is now an enormous opportunity for experimentation, creativity, and research in Smart Grid technology. Entrepreneurs, universities, and other innovators are in the process of creating indescribable possibilities for the future Smart Grid.

Funding

The major starting point for investment into modernizing the current grid was the U.S. Department of Energy's (DOE) stimulus package (American Recovery and Reinvestment Act, i.e. ARRA). The ARRA invested approximately $4.4 billion on Smart Grid research.[9] LADWP received $60 million from the DOE's stimulus package. "The money will be used for “smart grid" demonstration projects. The projects will allow the city’s Department of Water and Power, the largest municipal utility in the nation, to use advanced meters and other technology at the universities to chart how power is being consumed, forecast demand and potential outages, and seek ways to reduce energy use."[10]

The Waxman–Markley comprehensive energy bill (American Clean Energy and Security Act of 2009)[11] increased the awareness and impact on the electric transmission grid. The act was designed with the intention to reduce greenhouse emissions by 17 percent by 2020. This reduction would require there to be a concentration on energy consumption and production. This bill, directly and indirectly, stimulates universities and private industries to become innovators in new technologies for the grid. Collaborations among utilities, government, technology providers, and universities are made being to provide information and technologies for the new generation of Smart Grid and Smart Energy Technology.

SMERC also receives funding from California Energy Commission, EPRI, KIER, and the UCLA Smart Grid Industry Partners Program(SMERC-IPP).[12]

Projects

The Smart Grid Energy Research Center (SMERC) consists of several key projects as follows:

Connected and Autonomous Electric Vehicles (CAEV™)

CAEVTM is a UCLA-led consortium whose members consist of modern-day automotive companies, electric and autonomous transportation providers, and electric power companies that are modernizing the automotive industry into one that is electric, digital, connected, smart, autonomous, and serves the transportation and energy needs of society for the 21st Century and beyond. The purpose of the consortium is to create a partnership of Electric Vehicle and autonomous vehicle manufacturers in California, partnering with new energy companies that advance technology, create innovative business models, and educate and train the next generation of students to create the industry that will change the face of the automotive sector worldwide.[13]

UCLA WINSmart Grid™

"The UCLA WINSmartGridTM [1[14] is a network platform technology that allows electricity-operated appliances such as plug-in automobiles, washers, dryers, or air conditioners to be wirelessly monitored, connected, and controlled via a smart wireless hub."[15]

Overall, the WINSmartGridTM advantages are as follows: technology, uses low standards-based hardware resulting in lower overall cost, wireless infrastructure for monitoring and control, an open architecture for easy integration, a plug-and-play approach, reconfigurable ability, and a service architecture with three layers: edgeware, middleware, and Centralware.[16]

The WINSmartGridTM technology uses a three-layered Serviceware architecture along with ReWINS technology.

A simple explanation of the process is that the Centralware makes a decision, the Middleware reads that decision, then maps and routes these decisions to the Edgeware, where the decisions are then sent through the low-level control signals.

The edgeware controls and utilizes the wireless technology networks and the creation, management, set-up, and maintenance of software and firmware. It connects with RFID tags, motion detectors, temperature monitors, or 10X controllers on refrigerators. Within the WINSmartGridTM hub, a variety of monitors and sensors are supported that the Edgeware has connections to, including humidity, current, voltage, power, shock, motion, chemicals, etc. This hub is capable of supporting wireless protocols (e.g., WiFi, Bluetooth, Zigbee, GPRS, and RFID). The most efficient protocols seem to be low-power protocols such as Zigbee.

The Middleware is the "middle man" between the Edgeware and the Centralware. Capable of providing functions such as data filtration, extraction of meaningful information, aggregation and messaging of data from the Edgeware, and distribution of the information to the proper destination or web service accordingly.

The Centralware decision-making web service It receives all information, determines what the best decisions are based on rules, and carries out the execution of these decisions. Currently, the WINSmartGridTM Centralware is running on a basic set of rules, whereas it will eventually work with external intelligent services as they begin to come online.

Automated Demand Response (ADR)

“The Automated Demand-Response (ADR)[17] programs shows control models and secure messaging schemes, automation in load curtailment, leveraging multiple communication technologies, and maintaining interoperability between the Smart Grid automation architecture layers.”[18]

SMERC is in the process of creating a test area that would provide information on consumers’ energy usage and the distribution of that energy from a utility service. The test beds are located on the UCLA campus which will serve as a living lab for demonstration of ADR concepts. Since UCLA produces 75% of its own energy through its natural gas power plant, the campus is an easy and desirable place for conducting ADR research and demonstration.

ADR will require control technology components and subsystems that will work with security, network standards, messaging, protocols, etc. in culmination with operational parameters. Advanced Metering Infrastructure (AMI) will also be checked for proper ability in terms of data volume and networking aspects. Further requirements such as rate design models, system-wide data and metadata modeling, etc. will be used to guide the system architecture The Demand-Response system provides an efficient service to utility systems and consumers. It is based on a service-oriented architecture (SOA) that would use information from the utility systems 'technical evaluations and requirements to help assist integration modalities for backend utility systems. Through this architecture, real-time collaboration among the entire network involving billing, metering, distribution, etc., can be accomplished. Consumers are able to make requests ,and a supervisory controllsystem will monitor the dconsumer's demands ond make the best available decisions. This Demand-response system will also be represented by various types of energy customers (e.g. commercial, residential, industrial). This will create unique and different load profiles and pricing for each tf these customers, all of which the system must keep track of. With the WINSmartGrid™ technology, transactions will be communicated through wireless technologies to convey common data payloads. Currently, SOA in conjunction with open embedded system scan provide support for plug-and-play and secure-demand-response. Also, an application programming interface (API) provides customizability and extensibility to the system.

The test beds use automation technologies and will provide demonstration of the systems functionality, communication fidelity and reliability, testing of data, protocols, etc. These technologies are AMI-DR models, hardware and software interfaces, software architecture, access control policies, recommended security schemes and algorithms, and desired set of optimizations.

The testing phase would provide developed, detailed performance on the demand-response processes and technology components or sub-systems where efficient changes and predictions can be made to fulfill a targeted load curtailment and consumer demands.

The test beds for the current research will have a "network platform that enables appliances such as plug-in electric vehicles, washers, dryers and air conditioners to be wirelessly monitored, connected, and controlled through a wireless communications framework. These test bed arrangements will provide vital research on the demand-response systems."[19]

Electric vehicle integration into the grid

The automotive market in California is unlike any other. With an immense population and energy consumption, the state calls for creative ways to conserve energy in the most energy-conscious and cost efficient ways. It comes to no surprise then ,that California would be the base for the most significant electric vehicle (EV) innovators, such as Tesla. As these changes and innovations to the EV culture continue to grow, the next step is to supply this innovation with the capability to communicate and integrate EVs into the smart grid of tomorrow.[20]

Currently, technology within SMERC is being used and built for the program WINSmartEV™. It focuses on the integration of both wireless and RF-monitoring and control technologies.[21] EV technology provides a more energy-efficient, economical, and user friendly smart technology for charging an EV.[22] Several parking structures on the UCLA campus now provide EV charging to its members. These stations are monitored by SMERC's software systems in the Engineering Department. All data regarding these charging stations is collected by members of the SMERC team to evaluate tendencies and requests of its users. This data will be evaluated to provide the stations 'users with the best possible management of charging their EV.[23]

WINSmartEV™'s main objective is to increase the stability of the local power system and reduce energy cost by managing all operations conducted in charging an EV. The most recent implementation developed allows for several EVs to charge at one charging station while receiving different, yet controllable current. This type of charging system will provide the user with the vast flexibility towards charging an EV. This system provides the user with conveniences pertaining to parking, price, time limits, and power consumption.

Another objective for the WINSmartEV™ program wirelessly gathering inmation from the electric grid and EV to the determine more efficient charging capabilities for the EV. With the proper management of EV’s, charging and backfill operations can be used to lower electricity rates and flatten the load curve.

User interface allows the EV owner to have the capability of controlling where, when, why, and how to charge their vehicle. An EV user may use a handheld device to view a map of charging stations, schedule an exact time charge, start and stop charge at any convenience, and this all could be done from a single touch on a Smsrtphone or other handheld devices. Also, if necessary or requested, an alert can be issued to the driver when the battery capacity is low and needs charging.

SMERC evaluates EVs and charging stations patterns in order to determine the appropriate wireless technologies and sensor modules that are best for installation. In conclusion, integrating the EVs with WINSmardGrid™ the local AM,I and Demand-Response will provide communication and alerting systems for WINSmartETM™.

Cyber Security project

The electricity distribution systems are becoming drastically more complex and more dynamic, while the power grid is in the transition to the smart grid. The deployment of distributed energy resources (DERs) such as solar panels and energy storage devices is proliferating. Numerous inputs and controls are pushed and pulled from various advanced distribution grid platforms. Some of the inputs and controls connect the grid resources to the public Internet. Improved sensing, communication, and control capabilities have the capability to enormously enhance the performance of the electric grid, but at the cost of increased vulnerabilities to deliberate attacks and accidental failures, threatening the grid’s functionality and reliability. EV charging system that connects to the smart grid is considered as an information network with a massive communication among utility, EV and DER control centers, EV supply equipment (EVSE), and power meters. As EV charging consumes a lot of power and thus can have a considerable impact on a distribution system, the cybersecurity on fhe EV charging domain is as critical as a distribution grid.

The ongoing research project titled “UC-Lab Center for Electricity Distribution Cybersecurity,[24]” which is currently sponsored by UCLRP (UCOP LFR-18-548175[25]) has bring together a multi-disciplinary UC-Lab team of cybersecurity and electricity infrastructure experts to investigate the impact of cyberattacks on electricity distribution infrastructure and develop new strategies for mitigation of vulnerabilities, detection of intrusion, and protection against detrimental system-wide impact.

The SMERC team focuses on the cybersecurity for the EV charging network, including system vulnerability analysis, risk assessment, and the impacts of cyber-attacks, as well as anomaly detection.

The team has researched the vulnerability analysis and risk assessment for the smart charging infrastructure based on the charging system on the UCLA campus, which is called WINSmartEV™. The research has outlined a codified methodology and taxonomy for assessing vulnerability and risk of cyber-physical attacks on the EV charging networks to create a generalizable and comprehensive solution.[26] For the anomaly detection, the team analyzes the multidimensional time-series data, including building load, solar generation, dynamic electricity price, and EV load, within the WINSmartEV™. The objective is to characterize the regular EV charging operation to establish a correlation-invariant network, thereby identifying anomalies or malicious data injection, which disturbs the correlations within the system.

Other projects

Other projects in beginning stages or current development in the SMERC are Battery storage integration with renewable solar, EV to solar integration, V2G, Cyber Security Testing, Wireless Monitoring and Control of the grid, Microgrid modeling and control, Autonomous Electric Vehicles, Home Area Networks and Consumer Issue in EV Integration and DR.

Recent news and events

SMERC has hosted several events both inside and outside UCLA with notable speakers from both academia and industry.[27] Notable locations of seminars and panel discussions include Shanghai Jiao Tong University, Indian Institutes of Technology, and at the California State Capitol Building in Sacramento. The director of the lab, Dr. Rajit Gadh, has been quoted in notable articles such as Fast Company,[28] and his activity includes meeting with the director of The Energy and Resources Institute and appearances in various events such as the Intercharge Network Conference in 2018. In addition, every year there is an Electric and Autonomous Transportation UCLA CAEV Annual Conference where the electric vehicle industry is discussed.[29] Other notable events include the Workshop on Technology Trends in Transportation and Electricity, Artificial Intelligence and Autonomous Systems: Technology Innovations and Business Opportunities, and Distributed Energy Resources (DER)—EV, PV and Storage—for a Modern Grid.

References

  1. ↑ "2012 Higher Education Sustainability Review | Association for the Advancement of Sustainability in Higher Education". AASHE. Archived from the original on 2013-08-07. Retrieved 2013-08-02.
  2. ↑ "UCLA Smart Grid Energy Research Center | About". smartgrid.ucla.edu. Retrieved 2018-11-24.
  3. ↑ "EE Times Videos of People, Demos & Events for Electrical Engineers". Video.eetimes.com. Archived from the original on 2013-06-29. Retrieved 2013-05-01.
  4. ↑ "Building the 'smart grid'". Archived from the original on July 11, 2010. Retrieved October 10, 2012.
  5. ↑ "UCLA teams with Korean energy research institute on smart grid". Telecommunications Online & Horizon House Publications. Archived from the original on April 23, 2012. Retrieved October 10, 2012.
  6. ↑ "UCLA Smart Grid Energy Research Center (SMERC) celebrates its start". UCLA. Archived from the original on December 10, 2012. Retrieved October 10, 2012.
  7. ↑ UCLA Smart Grid Energy Research Center. UCLA. April 11, 2012. Retrieved 16 October 2012.
  8. ↑ Stephen Wozniak. "Homebrew and How the Apple Came to be". Retrieved September 9, 2012.
  9. ↑ "The American Recovery and Reinvestment Act" (PDF). GPO. January 6, 2009. Retrieved September 9, 2012.
  10. ↑ "L.A. gets $60-million stimulus grant for 'smart grid' electric power system". Los Angeles Times. November 24, 2009. Retrieved October 10, 2012.
  11. ↑ "American Clean Energy and Security Act of 2009". GPO. July 6, 2009. Retrieved September 9, 2012.
  12. ↑ UCLA Smart Grid Industry Partners Program
  13. ↑ "UCLA Smart Grid Energy Research Center | SMERC". smartgrid.ucla.edu. Retrieved 2020-01-28.
  14. ↑ "UCLA WINSmartGrid™". SMERC. Archived from the original on September 22, 2012. Retrieved September 9, 2012.
  15. ↑ "What is the UCLA WINSmartGrid™". SMERC. Archived from the original on July 25, 2012. Retrieved September 9, 2012.
  16. ↑ "UCLA WINSmartGrid™ Technology". SMERC. Archived from the original on July 24, 2012. Retrieved September 9, 2012.
  17. ↑ "Research and Development of Automated Demand Response Program UCLA Smart Grid Energy Research Center (SMERC)". SMERC. Retrieved September 9, 2012.
  18. ↑ "Demand Response SMERC". SMERC. Retrieved September 9, 2012.
  19. ↑ "University of California and Korea Enter Partnership". smartmeters.com. Archived from the original on January 31, 2012. Retrieved October 10, 2012.
  20. ↑ UCLA. "UCLA News | Week: Powering electric vehicles wirelessly | UCLA". Newsroom.ucla.edu. Retrieved 2014-04-22.
  21. ↑ "Design of RFID Mesh Network for Electric Vehicle Smart Charging Infrastructure" (PDF). 2013-09-24. Archived from the original (PDF) on 2013-09-28. Retrieved 2013-09-24.
  22. ↑ "Prof. Dr. Rajit Gadh - Smart Grid Energy Research Center, UCLA". YouTube. Retrieved 2014-05-30.
  23. ↑ "Rajit Gadh's Living Lab — UCLA Mechanical and Aerospace Engineering". Mae.ucla.edu. 2013-06-18. Archived from the original on 2013-07-02. Retrieved 2013-07-02.
  24. ↑ "UC-Lab Center for Electricity Distribution Cybersecurity". UC Riverside. Retrieved January 27, 2020.
  25. ↑ "UC Lab Fees Research Program (LFR-18-548175)". Digital Science & Research Solutions, Inc. Retrieved January 27, 2020.
  26. ↑ Reeh, Devin; Francisco Cruz, Tapia; Chung, Yu-Wei; Khaki, Behnam; Chu, Chicheng; Gadh, Rajit (2019). "Vulnerability Analysis and Risk Assessment of EV Charging System under Cyber-Physical Threats". 2019 IEEE Transportation Electrification Conference and Expo (ITEC). pp. 1–6. doi:10.1109/ITEC.2019.8790593. ISBN 978-1-5386-9310-0. ISSN 2377-5483. S2CID 199509846.
  27. ↑ "SMERC News". Retrieved 6 November 2019.
  28. ↑ "This SUV powers your house–and your house powers this SUV". Retrieved 6 November 2019.
  29. ↑ "SMERC Electric and Autonomous Transportation". Retrieved 6 November 2019.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.