V/Line N Class
N458 on a Swan Hill service to Southern Cross speeds past Sunbury, September 2020.
Type and origin Power type Diesel-electric Builder Clyde Engineering, Somerton Model EMD JT22HC-2 Build date 1985–1987 Total produced 25
Specifications Configuration: ​  • UIC Co-Co Gauge 1,435 mm (4 ft 8+1⁄2 in), 1,600 mm (5 ft 3 in) Length 18.87 m (61 ft 11 in) Loco weight 123 tonnes (121 long tons; 136 short tons) Fuel type Diesel Fuel capacity 6,800 L (1,500 imp gal; 1,800 US gal) Lubricant cap. 625 L (137 imp gal; 165 US gal) Coolant cap. 882 L (194 imp gal; 233 US gal) Prime mover Order 1: EMD 12-645E3C Order 2: EMD 12-645E3B RPM range 300–904 Engine type Two-stroke diesel Generator EMD AR10-JJD-D18 Some converted to AR10-CA5 Traction motors EMD D77 (Originally built with D43)
Performance figures Maximum speed 130 km/h (81 mph) Power output 1,846 kW (2,476 hp) Tractive effort Starting: 289 kN (65,000 lbf) Continuous: 260 kN (58,000 lbf) at 21 km/h (13 mph)
Career Operators V/Line Number in class 25 Numbers N451-N475 Nicknames Dog bones First run 1985 Current owner V/Line Disposition 25 in service

The N Class are a class of diesel locomotives built by Clyde Engineering in Somerton for V/Line between 1985 and 1987.

History

At Seymour N464 leads the last locomotive hauled train from Albury on 30/07/22

N class in the original orange and grey livery hauling H type carriages in Geelong in 1993

N463 in the 1995 livery hauling N type carriages on the North East line in October 2007

N460 in the 2008 livery at Southern Cross in September 2008

N469 in the 1995 livery at Southern Cross in August 2006

N457 on up Albury Service in the current livery

N457, one of the few in the series converted to standard gauge, at Southern Cross in January 2012

By the start of the 1980s, Victorian Railways passenger numbers had fallen to around 3 million per year, due to ageing rolling stock, stagnant timetables and competition from other forms of transport. The Lonie Report of 1980 recommended sweeping cuts to the network, but there was a strong push from the many quarters for the state government to maintain a viable rail network. The government response in February 1981 was the New Deal for Country Passengers, a $115 million commitment to recast country rail passenger services in Victoria.^[1]

As part of the New Deal, all B class locomotives were to be re-built as the A class for use on passenger services, and ten new locomotives were ordered. Tenders closed in 1983, with Clyde Engineering being awarded the contract.^[2] By mid-1985, the rising cost of the A class conversions led to the project being abandoned after 11 locomotives had been upgraded, and the N class order was increased to 25, using parts intended for the A class conversions.^[1][3]

The N class locomotives entered service on the 1,600 mm (5 ft 3 in) gauge and operated on main lines all over the state, with the exception of the Gippsland line beyond Traralgon, a restriction that was later lifted. The class also saw regular use on The Overland Melbourne to Adelaide overnight service until the train was withdrawn in March 1995 so that the track could be converted to 1,435 mm (4 ft 8+1⁄2 in) standard gauge.^[2] As well as being operated by V/Line, N class locomotives were hired to the Warrnambool line operator, West Coast Railway, from 1993 to 1995, after which its own locomotives became available,^[4] and, between 1993 and 2004, to Shepparton line operator Hoys Roadlines.^[5]

In preparation for the privatisation of V/Line, the operations of V/Line Freight and V/Line Passenger were split in 1995,^[6] with the N class allocated to the passenger operator and included in the sale of V/Line Passenger to National Express in 1999.^[7] Before then, N class locomotives had been employed on freight services, restricted to a maximum speed of 90 km/h (56 mph).^[2]

During the Regional Fast Rail project, a number of shut-downs were affected passenger services, and N class locomotives were used to haul ballast trains on the Geelong line in 2003 and 2004,^[8] as well as being hired to Freight Australia in January 2004 to haul log and grain services.^[9] After 2007, class members were also been hired to heritage operator Seymour Railway Heritage Centre for use on its trains, because the provision of TPWS equipment on the locos allowed them to run at full line speed over the Regional Fast Rail network.^[10][11]

With the gradual introduction of VLocity diesel multiple unit trains, N class locomotives began to play a lesser role, their main use being to haul peak-time commuter services to Bacchus Marsh and Geelong, along with long-distance services beyond the Regional Fast Rail network, to Bairnsdale, Swan Hill, and Warrnambool. A standard gauge variation also ran Albury services, but they were replaced by standard gauge Vlocitys. The last standard gauge N class service ran on 30 July 2022.

N class locomotives are authorised to operate at 115 km/h (71 mph), although some units have been upgraded with D77/78 traction motors and have a maximum speed of 130 km/h (80 mph).^[12] By June 2020, all locomotives had been fitted with the upgraded traction motors.^[13]

Features

N class locomotives have a locally designed frame and body, fitted with imported Electro-Motive Division technology in the prime mover, generator and control unit, along with locally produced components such as the bogie frames, constructed by Bradken. The class was the first in the world to use the EMD D43 traction motor, similar to, but smaller than, that used in the C and G classes. Head end power is provided by a separate engine unit in a special compartment located at the number 1 end of the locomotive, behind the electrical cabinet. The 240 kW generator provides 415 V 3-phase AC power for train lighting, air conditioning and other carriage requirements.^[2]

Fitted with 6,800-litre fuel tanks, the class were capable of running from Melbourne to Adelaide without refuelling.^[14] Electrical and electronic components were modular, to minimise delays after failures, and a reactive muffler system reduced the exhaust noise level. While most of the locomotives have only been used on broad gauge, three were converted to 1,435 mm (4 ft 8+1⁄2 in) standard gauge by exchanging the wheelsets and repositioning the braking equipment.^[2]

The narrow car body provided for a catwalk along each side, between the cabs, with fold-back body panels for maintenance access. The cab is similar to that of the G class locomotives, with an anti-climber beam to prevent upward movement should a collision occur. Twin high-impact windscreens were provided, with dual blade wipers. Each cab had room for a two-person crew, as well as an instructor if required. Air conditioning was provided, as well as an air-operated retention toilet at one end, accessible from the catwalk. The locos were initially provided with automatic staff exchange equipment, but that was removed in the 1990s, after the use of the electric staff ended, although the space remains in the cab side.^[2]

The car body design was the basis of one-off locomotive, GML10, built by Clyde Engineering in 1990 for the Goldsworthy railway.^[15]

Livery

The N class locomotives were delivered in the V/Line tangerine orange and grey livery, and named after cities in Victoria, except for N453, which is named after the City of Albury in New South Wales. The N class is, therefore, one of only three Australian locomotive classes of which every class member is named.^[16] N465 carries the earlier spelling of Ballarat, originally Ballaarat. On 3 March 1987, locomotive N470 was returned to Clyde Engineering, Somerton for a ceremony, at which brass plaques were affixed at both ends under the builder's plates, reading "N470 completing one million horsepower of diesel-electric locomotives built in Australia by Clyde Engineering Co".^[17]

From 1995, the class members were repainted into the new V/Line red and blue livery, and the V/Line logo on the side was altered after the privatisation of V/Line in 1999.^[3] In a program started in 2007 N class locos received white stripes along the cab-fronts, and their cowcatchers were painted yellow, to increase visibility at level crossings .

In May 2008, locomotive N468 was repainted into the new V/Line livery of red with grey, white and yellow. Three of the repainted locos were converted to 1,435 mm (4 ft 8+1⁄2 in) standard gauge in 2011, following the conversion of the North East line.^[18][19]

On 8 April 2017, N457 made its first revenue run to Albury in the new PTV livery of purple and yellow. That followed the painting of carriage set SN 8 into the new livery to match the V/Locity fleet, and style of the wider fleet of Victorian trams and buses.

Vline N464 at Middle Footscray on its way to Albury

Locomotives

Gallery

• 
  N451 "City of Portland" crossing N471 "City of Benalla" at Tallarook
• 
  N452 "Rural City of Wodonga" at Kensington in the old "cheeseburger" livery
• 
  N453 arrives into Broadmeadows on a service from Albury. 17 January 2021.
• 
  N454 "City of Horsham" arrives into Warrnambool
• 
  N455 "City of Swan Hill" at Clayton
• 
  N456 "City of Colac" at Eaglehawke
• 
  N457 "City of Mildura" at Donnybrook
• 
  N458 on a Shepparton service passes Coolaroo. 18-1-21
• 
  N460 "City of Castlemaine" at Seymour
• 
  N462 "City of Shepparton" at Southern cross
• 
  N467 "City of Stawell" & N458 "City of Bairnsdale" Top'n'Tai at North Melbourne
• 
  N469 "City of Morwell" At Richmond
• 
  N471 "City of Benalla" at Footscray
• 
  N474 on a service from Albury passes West Footscray. 9-4-21.
• 
  N451 "City of Portland" at Seymour
• 
  N469 "City of Morwell" at Lara
• 
  N463 "City of Bendigo" at Albury
• 
  N463 "City of Bendigo" between Mangalore and Seymour

References

External links

Media related to V/Line N class at Wikimedia Commons