NZ 40
Walter NZ 45
Type Radial aero engine
National origin Czechoslovakia
Manufacturer Walter Aircraft Engines
First run 1929
Developed from Walter NZ 60

The Walter NZ 40 was an unsuccessful, three-cylinder, air-cooled, radial engine for aircraft use built in Czechoslovakia by Walter Aircraft Engines in the late-1920s.

Design and development

Using common cylinders and parts from the earlier Walter NZ 60 (Novák-Zeithammer) engine the NZ 40 was the last in this series of engines.[1] Problems with imbalance causing vibrations lead to the type being redesigned as the NZ 45. This version underwent a type test in early 1932 but the problems were not fully resolved and the engine did not find any aircraft application. Very few of these engines were produced before being replaced in the range by the Walter Polaris.[2]

Specifications (NZ 40)

Data from Němeček.[2]

General characteristics

  • Type: Three-cylinder radial piston engine
  • Bore: 105 mm (4.13 in)
  • Stroke: 120 mm (4.72 in)
  • Displacement: 3.12 L (190 cu in)
  • Length: 695 mm (27.4 in)
  • Diameter: 965 mm (38.0 in)
  • Dry weight: 72 kg (159 lb)

Components

  • Valvetrain: Overhead valve, two valves per cylinder
  • Fuel system: Zenith carburettor
  • Oil system: Pressure fed, dry sump
  • Cooling system: Air-cooled
  • Reduction gear: Direct drive

Performance

See also

Comparable engines

Related lists

References

  1. Gunston 1989, p. 174.
  2. 1 2 Němeček 1983
  • Gunston, Bill. World Encyclopaedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
  • Němeček, Václav. Československá letadla I (1918-1945) (Czechoslovak Aircraft I (1918-1945)). Third edition, Naše vojsko, Prague. 1983.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.