Zuni Sandstone
Stratigraphic range:
Type locality of Zuni Sandstone at Dowa Yalanne
TypeFormation
Sub-unitsSan Rafael Group
UnderliesDakota Formation
OverliesChinle Group. Wingate Sandstone
Thickness150 m (490 ft)
Lithology
PrimarySandstone
Location
Coordinates35°03′09″N 108°47′45″W / 35.0525°N 108.7957°W / 35.0525; -108.7957
RegionNew Mexico
CountryUnited States
Type section
Named forZuni Plateau
Named byClarence Dutton
Year defined1885
Zuni Sandstone is located in the United States
Zuni Sandstone
Zuni Sandstone (the United States)
Zuni Sandstone is located in New Mexico
Zuni Sandstone
Zuni Sandstone (New Mexico)
Outcrop of Zuni Sandstone at El Malpais National Monument, New Mexico

The Zuni Sandstone is a geologic formation in west-central New Mexico. It marks the southernmost limit of Jurassic fluvial and lacustrine sedimentary formations, which pinch out to leave a single sandstone body.

Description

The Zuni Sandstone is found south of the I-40 corridor in west-central New Mexico. At about this latitude, the Todilto, Morrison, and Summerville Formations pinch out to leave a Jurassic section that is almost entirely composed of eolian sandstone. This is designated as the Zuni Sandstone, which is thus the lateral equivalent of the combined Entrada and Bluff Formations.[1]

At the type section at Dowa Yalaane (Taaiyalone Mesa), the formation consists of about 80 meters (260 ft) of eolian sandstone corresponding to the Entrada Formation. A break corresponds to the pinched-out Todilto and Summerville Formations. Above this is about 60 meters (200 ft) of sandstone corresponding to the Bluff Formation. Then comes a break corresponding to the pinch-out of the Recapture Member of the Morrison Formation, another sandstone interval corresponding to the Acoma Tongue of the Zuni Sandstone, and a final break corresponding to the pinchout of the remaining Morrison Formation. The Zuni Formation unconformably rests on the Wingate Sandstone or Chinle Group and is unconformably overlain by the Dakota Formation.[2][1]

History of investigation

The unit was first described by Clarence Dutton in 1885.[3] However, A.A. Baker, C.H. Dane, and J.B. Reeside regarded it as identical to the Morrison Formation.[4] R.J. Hackman and A.B. Olson renamed the beds as the Cow Springs Sandstone in 1977[5] O.J. Anderson proposed the modern definition of the formation in 1983.[2]

References

  1. 1 2 Lucas, Spencer G. (2020). "Jurassic stratigraphy of the southeastern Colorado Plateau, west-central New Mexico: 2020 synthesis" (PDF). New Mexico Geological Society Special Publication. 14: 135–144. Retrieved 30 October 2020.
  2. 1 2 Anderson, O.J. (1983). "Preliminary report on redefinition of Zuni Sandstone, west-central New Mexico" (PDF). New Mexico Geology. 5 (3): 56–60. Retrieved 29 October 2020.
  3. Dutton, C.E. (1885). "Mount Taylor and the Zuni plateau". U.S. Geological Survey Annual Report. 6: 113–198. Retrieved 29 October 2020.
  4. Baker, A.A.; Dane, C.H.; Reeside, J.B. Jr. (1936). "Correlation of the Jurassic formations of parts of Utah, Arizona, New Mexico, and Colorado". U.S. Geological Survey Professional Paper. 183. doi:10.3133/pp183.
  5. Hackman, R.J.; Olson, A.B. (1977). "Geology, structure, and uranium deposits of the Gallup 1 degree x 2 degrees quadrangle, New Mexico and Arizona". U.S. Geological Survey Miscellaneous Investigations Series Map. I-981. Retrieved 29 October 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.