A440 Play. 440 Hz = 4.21 or 4.39

The Bark scale is a psychoacoustical scale proposed by Eberhard Zwicker in 1961. It is named after Heinrich Barkhausen who proposed the first subjective measurements of loudness.[1] One definition of the term is "...a frequency scale on which equal distances correspond with perceptually equal distances. Above about 500 Hz this scale is more or less equal to a logarithmic frequency axis. Below 500 Hz the Bark scale becomes more and more linear."[2]

The scale ranges from 1 to 24 and corresponds to the first 24 critical bands of hearing.[3]

It is related to, but somewhat less popular than, the mel scale, a perceptual scale of pitches judged by listeners to be equal in distance from one another.

Bark scale critical bands

Chart of the critical bands of the Bark scale
NumberCenter frequency (Hz)Cut-off frequency (Hz)Bandwidth (Hz)
20
15010080
2150200100
3250300100
4350400100
5450510110
6570630120
7700770140
8840920150
910001080160
1011701270190
1113701480210
1216001720240
1318502000280
1421502320320
1525002700380
1629003150450
1734003700550
1840004400700
1948005300900
20580064001100
21700077001300
22850095001800
2310500120002500
2413500155003500

Since the direct measurements of the critical bands are subject to error, the values in this table have been generously rounded.[1]

In his letter "Subdivision of the Audible Frequency Range into Critical Bands", Zwicker states:

"These bands have been directly measured in experiments on the threshold for complex sounds, on masking, on the perception of phase, and most often on the loudness of complex sounds. In all these phenomena, the critical band seems to play an important role. It must be pointed out that the measurements taken so far indicate that the critical bands have a certain width, but that their position on the frequency scale is not fixed; rather, the position can be changed continuously, perhaps by the ear itself."

Thus the important attribute of the Bark scale is the width of the critical band at any given frequency, not the exact values of the edges or centers of any band.

Conversions

To convert a frequency f (Hz) into Bark use:

or (Traunmüller, 1990)[4]

or (Wang, Sekey & Gersho, 1992)[5]

See also

References

  1. 1 2 Zwicker, E. (1961), "Subdivision of the audible frequency range into critical bands," The Journal of the Acoustical Society of America, Volume 33, Issue 2, p. 248 (1961)
  2. Hermes, Dik J. "Sound Perception: The Science of Sound Design". home.ieis.tue.nl. Archived from the original on 22 November 2017. Retrieved 17 September 2015.
  3. Julius O. Smith III and Jonathan S. Abel. "The Bark Frequency Scale", CCRMA.Stanford.edu.
  4. Traunmüller, H. (1990). "Analytical expressions for the tonotopic sensory scale". The Journal of the Acoustical Society of America. 88 (1): 97. Bibcode:1990ASAJ...88...97T. doi:10.1121/1.399849. S2CID 124703204.
  5. "Sonification seminar – 10/9/03", CCRMA.Stanford.edu.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.