General relativity
${\displaystyle G_{\mu \nu }+\Lambda g_{\mu \nu }={\kappa }T_{\mu \nu }}$
Introduction History Timeline Tests Mathematical formulation
Fundamental concepts Equivalence principle Special relativity World line Pseudo-Riemannian manifold
Phenomena Kepler problem Gravitational lensing Gravitational waves Frame-dragging Geodetic effect Event horizon Singularity Black hole Spacetime Spacetime diagrams Minkowski spacetime Einstein–Rosen bridge
Equations Formalisms Equations Linearized gravity Einstein field equations Friedmann Geodesics Mathisson–Papapetrou–Dixon Hamilton–Jacobi–Einstein Formalisms ADM BSSN Post-Newtonian Advanced theory Kaluza–Klein theory Quantum gravity
Solutions Schwarzschild (interior) Reissner–Nordström Gödel Kerr Kerr–Newman Kerr–Newman–de Sitter Kasner Lemaître–Tolman Taub–NUT Milne Robertson–Walker Oppenheimer–Snyder pp-wave van Stockum dust Weyl−Lewis−Papapetrou
Scientists Einstein Lorentz Hilbert Poincaré Schwarzschild de Sitter Reissner Nordström Weyl Eddington Friedman Milne Zwicky Lemaître Oppenheimer Gödel Wheeler Robertson Bardeen Walker Kerr Chandrasekhar Ehlers Penrose Hawking Raychaudhuri Taylor Hulse van Stockum Taub Newman Yau Thorne others
Physics portal  Category

Frame-dragging is an effect on spacetime, predicted by Albert Einstein's general theory of relativity, that is due to non-static stationary distributions of mass–energy. A stationary field is one that is in a steady state, but the masses causing that field may be non-static ⁠— rotating, for instance. More generally, the subject that deals with the effects caused by mass–energy currents is known as gravitoelectromagnetism, which is analogous to the magnetism of classical electromagnetism.

The first frame-dragging effect was derived in 1918, in the framework of general relativity, by the Austrian physicists Josef Lense and Hans Thirring, and is also known as the Lense–Thirring effect.^[1][2][3] They predicted that the rotation of a massive object would distort the spacetime metric, making the orbit of a nearby test particle precess. This does not happen in Newtonian mechanics for which the gravitational field of a body depends only on its mass, not on its rotation. The Lense–Thirring effect is very small – about one part in a few trillion. To detect it, it is necessary to examine a very massive object, or build an instrument that is very sensitive.

In 2015, new general-relativistic extensions of Newtonian rotation laws were formulated to describe geometric dragging of frames which incorporates a newly discovered antidragging effect.^[4]

Effects

Rotational frame-dragging (the Lense–Thirring effect) appears in the general principle of relativity and similar theories in the vicinity of rotating massive objects. Under the Lense–Thirring effect, the frame of reference in which a clock ticks the fastest is one which is revolving around the object as viewed by a distant observer. This also means that light traveling in the direction of rotation of the object will move past the massive object faster than light moving against the rotation, as seen by a distant observer. It is now the best known frame-dragging effect, partly thanks to the Gravity Probe B experiment. Qualitatively, frame-dragging can be viewed as the gravitational analog of electromagnetic induction.

Also, an inner region is dragged more than an outer region. This produces interesting locally rotating frames. For example, imagine that a north–south-oriented ice skater, in orbit over the equator of a rotating black hole and rotationally at rest with respect to the stars, extends her arms. The arm extended toward the black hole will be "torqued" spinward due to gravitomagnetic induction ("torqued" is in quotes because gravitational effects are not considered "forces" under GR). Likewise the arm extended away from the black hole will be torqued anti-spinward. She will therefore be rotationally sped up, in a counter-rotating sense to the black hole. This is the opposite of what happens in everyday experience. There exists a particular rotation rate that, should she be initially rotating at that rate when she extends her arms, inertial effects and frame-dragging effects will balance and her rate of rotation will not change. Due to the equivalence principle, gravitational effects are locally indistinguishable from inertial effects, so this rotation rate, at which when she extends her arms nothing happens, is her local reference for non-rotation. This frame is rotating with respect to the fixed stars and counter-rotating with respect to the black hole. This effect is analogous to the hyperfine structure in atomic spectra due to nuclear spin. A useful metaphor is a planetary gear system with the black hole being the sun gear, the ice skater being a planetary gear and the outside universe being the ring gear. See Mach's principle.

Another interesting consequence is that, for an object constrained in an equatorial orbit, but not in freefall, it weighs more if orbiting anti-spinward, and less if orbiting spinward. For example, in a suspended equatorial bowling alley, a bowling ball rolled anti-spinward would weigh more than the same ball rolled in a spinward direction. Note, frame dragging will neither accelerate nor slow down the bowling ball in either direction. It is not a "viscosity". Similarly, a stationary plumb-bob suspended over the rotating object will not list. It will hang vertically. If it starts to fall, induction will push it in the spinward direction.

Linear frame dragging is the similarly inevitable result of the general principle of relativity, applied to linear momentum. Although it arguably has equal theoretical legitimacy to the "rotational" effect, the difficulty of obtaining an experimental verification of the effect means that it receives much less discussion and is often omitted from articles on frame-dragging (but see Einstein, 1921).^[5]

Static mass increase is a third effect noted by Einstein in the same paper.^[6] The effect is an increase in inertia of a body when other masses are placed nearby. While not strictly a frame dragging effect (the term frame dragging is not used by Einstein), it is demonstrated by Einstein that it derives from the same equation of general relativity. It is also a tiny effect that is difficult to confirm experimentally.

Experimental tests

In 1976 Van Patten and Everitt^[7][8] proposed to implement a dedicated mission aimed to measure the Lense–Thirring node precession of a pair of counter-orbiting spacecraft to be placed in terrestrial polar orbits with drag-free apparatus. A somewhat equivalent, less expensive version of such an idea was put forth in 1986 by Ciufolini^[9] who proposed to launch a passive, geodetic satellite in an orbit identical to that of the LAGEOS satellite, launched in 1976, apart from the orbital planes which should have been displaced by 180 degrees apart: the so-called butterfly configuration. The measurable quantity was, in this case, the sum of the nodes of LAGEOS and of the new spacecraft, later named LAGEOS III, LARES, WEBER-SAT.

Limiting the scope to the scenarios involving existing orbiting bodies, the first proposal to use the LAGEOS satellite and the Satellite Laser Ranging (SLR) technique to measure the Lense–Thirring effect dates to 1977–1978.^[10] Tests started to be effectively performed by using the LAGEOS and LAGEOS II satellites in 1996,^[11] according to a strategy^[12] involving the use of a suitable combination of the nodes of both satellites and the perigee of LAGEOS II. The latest tests with the LAGEOS satellites have been performed in 2004–2006^[13][14] by discarding the perigee of LAGEOS II and using a linear combination.^[15] Recently, a comprehensive overview of the attempts to measure the Lense-Thirring effect with artificial satellites was published in the literature.^[16] The overall accuracy reached in the tests with the LAGEOS satellites is subject to some controversy.^[17][18][19]

The Gravity Probe B experiment^[20][21] was a satellite-based mission by a Stanford group and NASA, used to experimentally measure another gravitomagnetic effect, the Schiff precession of a gyroscope,^[22][23][24] to an expected 1% accuracy or better. Unfortunately such accuracy was not achieved. The first preliminary results released in April 2007 pointed towards an accuracy of^[25] 256–128%, with the hope of reaching about 13% in December 2007.^[26] In 2008 the Senior Review Report of the NASA Astrophysics Division Operating Missions stated that it was unlikely that the Gravity Probe B team will be able to reduce the errors to the level necessary to produce a convincing test of currently untested aspects of General Relativity (including frame-dragging).^[27][28] On May 4, 2011, the Stanford-based analysis group and NASA announced the final report,^[29] and in it the data from GP-B demonstrated the frame-dragging effect with an error of about 19 percent, and Einstein's predicted value was at the center of the confidence interval.^[30][31]

NASA published claims of success in verification of frame dragging for the GRACE twin satellites^[32] and Gravity Probe B,^[33] both of which claims are still in public view. A research group in Italy,^[34] USA, and UK also claimed success in verification of frame dragging with the Grace gravity model, published in a peer reviewed journal. All the claims include recommendations for further research at greater accuracy and other gravity models.

In the case of stars orbiting close to a spinning, supermassive black hole, frame dragging should cause the star's orbital plane to precess about the black hole spin axis. This effect should be detectable within the next few years via astrometric monitoring of stars at the center of the Milky Way galaxy.^[35]

By comparing the rate of orbital precession of two stars on different orbits, it is possible in principle to test the no-hair theorems of general relativity, in addition to measuring the spin of the black hole.^[36]

Astronomical evidence

Relativistic jets may provide evidence for the reality of frame-dragging. Gravitomagnetic forces produced by the Lense–Thirring effect (frame dragging) within the ergosphere of rotating black holes^[37][38] combined with the energy extraction mechanism by Penrose^[39] have been used to explain the observed properties of relativistic jets. The gravitomagnetic model developed by Reva Kay Williams predicts the observed high energy particles (~GeV) emitted by quasars and active galactic nuclei; the extraction of X-rays, γ-rays, and relativistic e⁻– e⁺ pairs; the collimated jets about the polar axis; and the asymmetrical formation of jets (relative to the orbital plane).

The Lense–Thirring effect has been observed in a binary system that consists of a massive white dwarf and a pulsar.^[40]

Mathematical derivation

Frame-dragging may be illustrated most readily using the Kerr metric,^[41][42] which describes the geometry of spacetime in the vicinity of a mass M rotating with angular momentum J, and Boyer–Lindquist coordinates (see the link for the transformation):

${\displaystyle {\begin{aligned}c^{2}d\tau ^{2}=&\left(1-{\frac {r_{s}r}{\rho ^{2}}}\right)c^{2}dt^{2}-{\frac {\rho ^{2}}{\Lambda ^{2}}}dr^{2}-\rho ^{2}d\theta ^{2}\\&{}-\left(r^{2}+\alpha ^{2}+{\frac {r_{s}r\alpha ^{2}}{\rho ^{2}}}\sin ^{2}\theta \right)\sin ^{2}\theta \ d\phi ^{2}+{\frac {2r_{s}r\alpha c\sin ^{2}\theta }{\rho ^{2}}}d\phi dt\end{aligned}}}$

where r_s is the Schwarzschild radius

${\displaystyle r_{s}={\frac {2GM}{c^{2}}}}$

and where the following shorthand variables have been introduced for brevity

${\displaystyle \alpha ={\frac {J}{Mc}}}$

${\displaystyle \rho ^{2}=r^{2}+\alpha ^{2}\cos ^{2}\theta \,\!}$

${\displaystyle \Lambda ^{2}=r^{2}-r_{s}r+\alpha ^{2}\,\!}$

In the non-relativistic limit where M (or, equivalently, r_s) goes to zero, the Kerr metric becomes the orthogonal metric for the oblate spheroidal coordinates

${\displaystyle c^{2}d\tau ^{2}=c^{2}dt^{2}-{\frac {\rho ^{2}}{r^{2}+\alpha ^{2}}}dr^{2}-\rho ^{2}d\theta ^{2}-\left(r^{2}+\alpha ^{2}\right)\sin ^{2}\theta d\phi ^{2}}$

We may rewrite the Kerr metric in the following form

${\displaystyle c^{2}d\tau ^{2}=\left(g_{tt}-{\frac {g_{t\phi }^{2}}{g_{\phi \phi }}}\right)dt^{2}+g_{rr}dr^{2}+g_{\theta \theta }d\theta ^{2}+g_{\phi \phi }\left(d\phi +{\frac {g_{t\phi }}{g_{\phi \phi }}}dt\right)^{2}}$

This metric is equivalent to a co-rotating reference frame that is rotating with angular speed Ω that depends on both the radius r and the colatitude θ

${\displaystyle \Omega =-{\frac {g_{t\phi }}{g_{\phi \phi }}}={\frac {r_{s}\alpha rc}{\rho ^{2}\left(r^{2}+\alpha ^{2}\right)+r_{s}\alpha ^{2}r\sin ^{2}\theta }}}$

In the plane of the equator this simplifies to:^[43]

${\displaystyle \Omega ={\frac {r_{s}\alpha c}{r^{3}+\alpha ^{2}r+r_{s}\alpha ^{2}}}}$

Thus, an inertial reference frame is entrained by the rotating central mass to participate in the latter's rotation; this is frame-dragging.

The two surfaces on which the Kerr metric appears to have singularities; the inner surface is the oblate spheroid-shaped event horizon, whereas the outer surface is pumpkin-shaped.^[44][45] The ergosphere lies between these two surfaces; within this volume, the purely temporal component g_tt is negative, i.e., acts like a purely spatial metric component. Consequently, particles within this ergosphere must co-rotate with the inner mass, if they are to retain their time-like character.

An extreme version of frame dragging occurs within the ergosphere of a rotating black hole. The Kerr metric has two surfaces on which it appears to be singular. The inner surface corresponds to a spherical event horizon similar to that observed in the Schwarzschild metric; this occurs at

${\displaystyle r_{\text{inner}}={\frac {r_{s}+{\sqrt {r_{s}^{2}-4\alpha ^{2}}}}{2}}}$

where the purely radial component g_rr of the metric goes to infinity. The outer surface can be approximated by an oblate spheroid with lower spin parameters, and resembles a pumpkin-shape^[44][45] with higher spin parameters. It touches the inner surface at the poles of the rotation axis, where the colatitude θ equals 0 or π; its radius in Boyer-Lindquist coordinates is defined by the formula

${\displaystyle r_{\text{outer}}={\frac {r_{s}+{\sqrt {r_{s}^{2}-4\alpha ^{2}\cos ^{2}\theta }}}{2}}}$

where the purely temporal component g_tt of the metric changes sign from positive to negative. The space between these two surfaces is called the ergosphere. A moving particle experiences a positive proper time along its worldline, its path through spacetime. However, this is impossible within the ergosphere, where g_tt is negative, unless the particle is co-rotating with the interior mass M with an angular speed at least of Ω. However, as seen above, frame-dragging occurs about every rotating mass and at every radius r and colatitude θ, not only within the ergosphere.

See also

• Kerr metric
• Geodetic effect
• Gravity Recovery and Climate Experiment
• Gravitomagnetism
• Mach's principle
• Broad iron K line
• Relativistic jet
• Lense–Thirring precession

References

Further reading

• Renzetti, G. (May 2013). "History of the attempts to measure orbital frame-dragging with artificial satellites". Central European Journal of Physics. 11 (5): 531–544. Bibcode:2013CEJPh..11..531R. doi:10.2478/s11534-013-0189-1.
• Ginzburg, V. L. (May 1959). "Artificial Satellites and the Theory of Relativity". Scientific American. 200 (5): 149–160. Bibcode:1959SciAm.200e.149G. doi:10.1038/scientificamerican0559-149.

External links

• NASA RELEASE: 04-351 As The World Turns, It Drags Space And Time