Track gauge
By transport mode
By size (list)
Graphic list of track gauges
Minimum
  Minimum
  Fifteen inch 381 mm (15 in)
Narrow
 
  • 600 mm
  • 610 mm
  • 686 mm
  • (1 ft 11+5⁄8 in)
  • (2 ft)
  • (2 ft 3 in)
 
  • 750 mm
  • 760 mm
  • 762 mm
  • (2 ft 5+1⁄2 in)
  • (2 ft 5+15⁄16 in)
  • (2 ft 6 in)
 
  • 891 mm
  • 900 mm
  • 914 mm
  • 950 mm
  • (2 ft 11+3⁄32 in)
  • (2 ft 11+7⁄16 in)
  • (3 ft)
  • (3 ft1+13⁄32 in)
  Metre 1,000 mm (3 ft 3+3⁄8 in)
  Three foot six inch 1,067 mm (3 ft 6 in)
  Four foot 1,219 mm (4 ft 0 in)
  Four foot six inch 1,372 mm (4 ft 6 in)
  1432 mm 1,432 mm (4 ft 8+3⁄8 in)
  Standard 1,435 mm (4 ft 8+1⁄2 in)
Broad
 
  • 1,445 mm
  • 1,450 mm
  • (4 ft 8+7⁄8 in)
  • (4 ft 9+3⁄32 in)
  Leipzig gauge 1,458 mm (4 ft 9+13⁄32 in)
  Toronto gauge 1,495 mm (4 ft 10+7⁄8 in)
 
  • 1,520 mm
  • 1,524 mm
  • (4 ft 11+27⁄32 in)
  • (5 ft)
 
  • 1,581 mm
  • 1,588 mm
  • 1,600 mm
  • (5 ft 2+1⁄4 in)
  • (5 ft 2+1⁄2 in)
  • (5 ft 3 in)
  Baltimore gauge 1,638 mm (5 ft 4+1⁄2 in)
 
  • 1,668 mm
  • 1,676 mm
  • (5 ft 5+21⁄32 in)
  • (5 ft 6 in)
  Six foot 1,829 mm (6 ft)
  Brunel 2,140 mm (7 ft 1⁄4 in)
Change of gauge
By location
World map, rail gauge by region

Gauge conversion is the changing of one railway track gauge (the distance between the running rails) to another.

Sleepers

If tracks are converted to a narrower gauge, the existing sleepers (ties) may be used. However, replacement is required if the conversion is to a significantly wider gauge. Some sleepers may be long enough to accommodate the fittings of both existing and alternative gauges. Wooden sleepers are suitable for conversion because they can be drilled for the repositioned rail spikes. Being difficult to drill, concrete sleepers are less suitable for conversion. Concrete sleepers may be cast with alternative gauge fittings in place, an example being those used during the conversion of the Melbourne–Adelaide railway from 1600 mm (5 ft 3 in) to 1435 mm (4 ft 8+1⁄2 in). Steel sleepers may have alternative gauge fittings cast at production, may be drilled for new fittings or may be welded with new fittings.

Structures

Conversion from a narrow to a wider gauge may require enlargement of the structure gauge of the bridges, overpasses and tunnels, embankments and cuts. The minimum curve radius may have a larger radius on broader gauges requiring route deviations to allow the minimum curve radius to be increased. Track centers at stations with multiple tracks may also have to be increased. Conversion from narrow to standard gauge can cause several changes not because of the gauge itself, but in order to be compatible with the structure gauge of standard gauge track, such as height of overpasses so that trains can be exchanged. The choice of train couplers may be a factor as well.

Rail vehicles

Where vehicles move to a different gauge, they must either be prepared for bogie exchange or be prepared for wheelset exchange. For example, passenger trains moving between the 1435 mm (4 ft 8+1⁄2 in) in France and the 1668 mm (5 ft 5+21⁄32 in) gauge in Spain pass through an installation which adjusts their variable-gauge axles. This process is known as "gauge change". Goods wagons are still subject to either bogie exchange or wheelset exchange.

Steam locomotives

In Australia, the multiplicity of track gauges prompted locomotive builders, after the early 1920s, to provide for a potential change of gauge. Three classes of large locomotives ordered by the South Australian Railways in 1924, including the 600 class pictured here (right), were configured to permit easy conversion from 1600 mm (5 ft 3 in) broad gauge to 1435 mm (4 ft 8+1⁄2 in) standard gauge. The older Rx class locomotive next to it was incapable of being converted because its frames were too wide for standard gauge.[note 1]

Some steam locomotives were constructed to be reconfigured to a different gauge: for example, some East African Railways locomotives; Garratts; the large 500, 600 and 700 class locomotives of the South Australian Railways introduced by William Webb in 1926;[1] and the Victorian Railways J, N and R classes. In the Australian instances, conversion was anticipated from 1600 mm (5 ft 3 in) broad gauge to 1435 mm (4 ft 8+1⁄2 in) standard gauge. Conversion to a wider gauge was similarly anticipated for the large 1067 mm (3 ft 6 in) narrow-gauge Western Australian Government Railways V class locomotive (to standard gauge).[2] Of these locomotives, only one R class was converted (when in preservation).[3] Two unanticipated conversions to occur were the ten locomotives of the South Australian Railways 740 class (from standard to broad gauge) and five 1067 mm (3 ft 6 in) narrow-gauge T class locomotives, which became the Tx class on the broad gauge before they were eventually converted back again.[4]

Gauge-change in steam locomotives has a long lineage. In about 1860, the Bristol and Exeter Railway converted five 1435 mm (4 ft 8+1⁄2 in) locomotives to 7 ft 1⁄4 in (2140 mm) gauge, and later converted them back again. Also in the 19th century, in the United States, some 5 ft (1524 mm) broad-gauge locomotives were designed for easy conversion to 1,435 mm (4 ft 8+1⁄2 in) gauge, and in the United Kingdom some 7 ft 1⁄4 in (2140 mm) broad-gauge locomotive classes of the Great Western Railway were designed for easy conversion to 1435 mm (4 ft 8+1⁄2 in) gauge.[5] After World War II, a number of captured German 03 class Pacifics locomotives were re-gauged to the 5 ft (1524 mm) Russian gauge.

Diesel and electric locomotives and trains

Most diesel and electric rolling stock can undergo gauge conversion by replacement of their bogies. Engines with fixed wheelbases are more difficult to convert. In Australia, diesel locomotives are regularly re-gauged between broad, standard and narrow gauges.

Wagons and coaches

Gauge conversion of wagons and coaches involves the replacement of the wheelsets or the bogies. In May 1892, wagons and coaches were converted when the 7 ft 1⁄4 in (2140 mm) gauge of the Great Western Railway was abandoned.

Gauge orphan

During or after gauge conversion work, some stations and branch lines may become "gauge orphans". This occurs especially when it is not considered economically worthwhile to go to the expense of gauge conversion. For example, on the standard gauge line between Adelaide and Melbourne, the broad gauge Victor Harbor branch line became a gauge orphan after the main line was converted in 1995 because it was too lightly trafficked; it now prospers as a heritage line, SteamRanger.

See also

Rail transport

Wikimedia Commons has media related to Manual gauge changing.
Wikimedia Commons has media related to Automated gauge changing.

Notes

  1. ↑ Wheel centres were coned outwards by 41.275 millimetres (1.625 inches) for broad gauge. By removing the tyres, turning the wheel centres around and putting them back on again, coned inwards and replacing the tyres, the gauge would be narrowed by 165 millimetres (6.5 inches).[1]: 65 

References

  1. 1 2 Stewien, Ron (2010). A history of the South Australian Railways volume 6: Mountains, Mikados and Pacifics. Matraville NSW: Eveleigh Press. ISBN 9781876568627.
  2. ↑ Clark, Peter (2012). The Australian Locomotive Guide. Dural: Rosenberg Publishing. p. 75. ISBN 9781922013682.
  3. ↑ "Minutes – general meeting 15–16 October 2005" (PDF). Association of Heritage Rail Australia. 16 October 2005. p. 37. Retrieved 30 November 2022 – via Wayback Machine.
  4. ↑ Oberg, Leon (1975). Locomotives of Australia. Terrey Hills, New South Wales: A.H. & A.W. Reed Pty Ltd. pp. 100, 193. ISBN 9780589071738.
  5. ↑ Gibson, John C. (1984). Great Western Locomotive Design. London: David & Charles. p. 43. ISBN 0715386069.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.