Oxidation state

In chemistry, the oxidation state, or oxidation number, is the hypothetical charge of an atom if all of its bonds to other atoms were fully ionic. It describes the degree of oxidation (loss of electrons) of an atom in a chemical compound. Conceptually, the oxidation state may be positive, negative or zero. While fully ionic bonds are not found in nature, many bonds exhibit strong ionicity, making oxidation state a useful predictor of charge.

The oxidation state of an atom does not represent the "real" charge on that atom, or any other actual atomic property. This is particularly true of high oxidation states, where the ionization energy required to produce a multiply positive ion is far greater than the energies available in chemical reactions. Additionally, the oxidation states of atoms in a given compound may vary depending on the choice of electronegativity scale used in their calculation. Thus, the oxidation state of an atom in a compound is purely a formalism. It is nevertheless important in understanding the nomenclature conventions of inorganic compounds. Also, several observations regarding chemical reactions may be explained at a basic level in terms of oxidation states.

Oxidation states are typically represented by integers which may be positive, zero, or negative. In some cases, the average oxidation state of an element is a fraction, such as 8/3 for iron in magnetite Fe₃O₄ (see below). The highest known oxidation state is reported to be +9, displayed by iridium in the tetroxoiridium(IX) cation (IrO+4).^[1] It is predicted that even a +10 oxidation state may be achieved by platinum in tetroxoplatinum(X), PtO2+4.^[2] The lowest oxidation state is −5, as for boron in Al₃BC^[3] and gallium in pentamagnesium digallide (Mg₅Ga₂).

In inorganic nomenclature, the oxidation state is represented by a Roman numeral placed after the element name inside parentheses or as a superscript after the element symbol, e.g. Iron(III) oxide.

The term oxidation was first used by Antoine Lavoisier to signify the reaction of a substance with oxygen. Much later, it was realized that the substance, upon being oxidized, loses electrons, and the meaning was extended to include other reactions in which electrons are lost, regardless of whether oxygen was involved. The increase in the oxidation state of an atom, through a chemical reaction, is known as oxidation; a decrease in oxidation state is known as a reduction. Such reactions involve the formal transfer of electrons: a net gain in electrons being a reduction, and a net loss of electrons being oxidation. For pure elements, the oxidation state is zero.

IUPAC definition

IUPAC has published a "Comprehensive definition of the term oxidation state (IUPAC Recommendations 2016)".^[4] It is a distillation of an IUPAC technical report "Toward a comprehensive definition of oxidation state" from 2014.^[5] The current IUPAC Gold Book definition of oxidation state is:

Oxidation state of an atom is the charge of this atom after ionic approximation of its heteronuclear bonds...
— IUPAC^[6]

and the term oxidation number is nearly synonymous.^[7]

The underlying principle is that the ionic charge is "the oxidation state of an atom, after ionic approximation of its bonds",^[8] where ionic approximation means, hypothesizing that all bonds are ionic. Several criteria were considered for the ionic approximation:

Extrapolation of the bond's polarity;
1. from the electronegativity difference,
2. from the dipole moment, and
3. from quantum‐chemical calculations of charges.
Assignment of electrons according to the atom's contribution to the bonding Molecular orbital (MO)^[8]^[9]/ the electron's allegiance in a LCAO–MO model.^[10]

In a bond between two different elements, the bond's electrons are assigned to its main atomic contributor/higher electronegativity; in a bond between two atoms of the same element, the electrons are divided equally. This is because most electronegativity scales depend on the atom's bonding state, which makes the assignment of the oxidation state a somewhat circular argument. For example, some scales may turn out unusual oxidation states, such as -6 for platinum in PtH2−4, for Pauling and Mulliken scales.^[11] The dipole moments would, sometimes, also turn out abnormal oxidation numbers, such as in CO and NO, which are oriented with their positive end towards oxygen. Therefore, this leaves the atom's contribution to the bonding MO, the atomic-orbital energy, and from quantum-chemical calculations of charges, as the only viable criteria with cogent values for ionic approximation. However, for a simple estimate for the ionic approximation, we can use Allen electronegativities,^[8] as only that electronegativity scale is truly independent of the oxidation state, as it relates to the average valence‐electron energy of the free atom:

Electronegativity using the Allen scale
Group →	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18
↓ Period
1	H 2.300																	He 4.160
2	Li 0.912	Be 1.576											B 2.051	C 2.544	N 3.066	O 3.610	F 4.193	Ne 4.787
3	Na 0.869	Mg 1.293											Al 1.613	Si 1.916	P 2.253	S 2.589	Cl 2.869	Ar 3.242
4	K 0.734	Ca 1.034	Sc 1.19	Ti 1.38	V 1.53	Cr 1.65	Mn 1.75	Fe 1.80	Co 1.84	Ni 1.88	Cu 1.85	Zn 1.588	Ga 1.756	Ge 1.994	As 2.211	Se 2.424	Br 2.685	Kr 2.966
5	Rb 0.706	Sr 0.963	Y 1.12	Zr 1.32	Nb 1.41	Mo 1.47	Tc 1.51	Ru 1.54	Rh 1.56	Pd 1.58	Ag 1.87	Cd 1.521	In 1.656	Sn 1.824	Sb 1.984	Te 2.158	I 2.359	Xe 2.582
6	Cs 0.659	Ba 0.881	Lu 1.09	Hf 1.16	Ta 1.34	W 1.47	Re 1.60	Os 1.65	Ir 1.68	Pt 1.72	Au 1.92	Hg 1.765	Tl 1.789	Pb 1.854	Bi 2.01	Po 2.19	At 2.39	Rn 2.60
7	Fr 0.67	Ra 0.89
See also: Electronegativities of the elements (data page)

Determination

While introductory levels of chemistry teaching use postulated oxidation states, the IUPAC recommendation^[4] and the Gold Book entry^[6] list two entirely general algorithms for the calculation of the oxidation states of elements in chemical compounds.

Simple approach without bonding considerations

Introductory chemistry uses postulates: the oxidation state for an element in a chemical formula is calculated from the overall charge and postulated oxidation states for all the other atoms.

A simple example is based on two postulates,

OS = +1 for hydrogen
OS = −2 for oxygen

where OS stands for oxidation state. This approach yields correct oxidation states in oxides and hydroxides of any single element, and in acids such as sulfuric acid (H₂SO₄) or dichromic acid (H₂Cr₂O₇). Its coverage can be extended either by a list of exceptions or by assigning priority to the postulates. The latter works for hydrogen peroxide (H₂O₂) where the priority of rule 1 leaves both oxygens with oxidation state −1.

Additional postulates and their ranking may expand the range of compounds to fit a textbook's scope. As an example, one postulatory algorithm from many possible; in a sequence of decreasing priority:

An element in a free form has OS = 0.
In a compound or ion, the sum of the oxidation states equals the total charge of the compound or ion.
Fluorine in compounds has OS = −1; this extends to chlorine and bromine only when not bonded to a lighter halogen, oxygen or nitrogen.
Group 1 and group 2 metals in compounds have OS = +1 and +2, respectively.
Hydrogen has OS = +1 but adopts −1 when bonded as a hydride to metals or metalloids.
Oxygen in compounds has OS = −2 but only when not bonded to oxygen (e.g. in peroxides) or fluorine.

This set of postulates covers oxidation states of fluorides, chlorides, bromides, oxides, hydroxides, and hydrides of any single element. It covers all oxoacids of any central atom (and all their fluoro-, chloro-, and bromo-relatives), as well as salts of such acids with group 1 and 2 metals. It also covers iodides, sulfides, and similar simple salts of these metals.

Algorithm of assigning bonds

This algorithm is performed on a Lewis structure (a diagram that shows all valence electrons). Oxidation state equals the charge of an atom after each of its heteronuclear bonds has been assigned to the more-electronegative partner of the bond (except when that partner is a reversibly bonded Lewis-acid ligand) and homonuclear bonds have been divided equally:

where each "—" represents an electron pair (either shared between two atoms or solely on one atom), and "OS" is the oxidation state as a numerical variable.

After the electrons have been assigned according to the vertical red lines on the formula, the total number of valence electrons that now "belong" to each atom is subtracted from the number $N$ of valence electrons of the neutral atom (such as 5 for nitrogen in group 15) to yield that atom's oxidation state.

This example shows the importance of describing the bonding. Its summary formula, HNO₃, corresponds to two structural isomers; the peroxynitrous acid in the above figure and the more stable nitric acid. With the formula HNO₃, the simple approach without bonding considerations yields −2 for all three oxygens and +5 for nitrogen, which is correct for nitric acid. For the peroxynitrous acid, however, the two oxygens in the O–O bond each has OS = −1 and the nitrogen has OS = +3, which requires a structure to understand.

Organic compounds are treated in a similar manner; exemplified here on functional groups occurring in between methane (CH₄) and carbon dioxide (CO₂):

Analogously for transition-metal compounds; CrO(O₂)₂ on the left has a total of 36 valence electrons (18 pairs to be distributed), and hexacarbonylchromium (Cr(CO)₆) on the right has 66 valence electrons (33 pairs):

A key step is drawing the Lewis structure of the molecule (neutral, cationic, anionic): atom symbols are arranged so that pairs of atoms can be joined by single two-electron bonds as in the molecule (a sort of "skeletal" structure), and the remaining valence electrons are distributed such that sp atoms obtain an octet (duet for hydrogen) with a priority that increases in proportion with electronegativity. In some cases, this leads to alternative formulae that differ in bond orders (the full set of which is called the resonance formulas). Consider the sulfate anion (SO2−4) with 32 valence electrons; 24 from oxygens, 6 from sulfur, 2 of the anion charge obtained from the implied cation). The bond orders to the terminal oxygens do not affect the oxidation state so long as the oxygens have octets. Already the skeletal structure, top left, yields the correct oxidation states, as does the Lewis structure, top right (one of the resonance formulas):

The bond-order formula at the bottom is closest to the reality of four equivalent oxygens each having a total bond order of 2. That total includes the bond of order 1/2 to the implied cation and follows the $8 - N$ rule^[5] requiring that the main-group atom's bond order equals $8 - N$ valence electrons of the neutral atom, enforced with a priority that proportionately increases with electronegativity.

This algorithm works equally for molecular cations composed of several atoms. An example is the ammonium cation of 8 valence electrons (5 from nitrogen, 4 from hydrogens, minus 1 electron for the cation's positive charge):

Drawing Lewis structures with electron pairs as dashes emphasizes the essential equivalence of bond pairs and lone pairs when counting electrons and moving bonds onto atoms. Structures drawn with electron dot pairs are of course identical in every way:

The algorithm's caveat

The algorithm contains a caveat, which concerns rare cases of transition-metal complexes with a type of ligand that is reversibly bonded as a Lewis acid (as an acceptor of the electron pair from the transition metal); termed a "Z-type" ligand in Green's covalent bond classification method. The caveat originates from the simplifying use of electronegativity instead of the MO-based electron allegiance to decide the ionic sign.^[4] One early example is the O₂S−RhCl(CO)(PPh₃)₂ complex^[12] with sulfur dioxide (SO₂) as the reversibly-bonded acceptor ligand (released upon heating). The Rh−S bond is therefore extrapolated ionic against Allen electronegativities of rhodium and sulfur, yielding oxidation state +1 for rhodium:

Algorithm of summing bond orders

This algorithm works on Lewis structures and bond graphs of extended (non-molecular) solids:

Oxidation state is obtained by summing the heteronuclear-bond orders at the atom as positive if that atom is the electropositive partner in a particular bond and as negative if not, and the atom’s formal charge (if any) is added to that sum.

Applied to a Lewis structure

An example of a Lewis structure with no formal charge,

illustrates that, in this algorithm, homonuclear bonds are simply ignored (the bond orders are in blue).

Carbon monoxide exemplifies a Lewis structure with formal charges:

To obtain the oxidation states, the formal charges are summed with the bond-order value taken positively at the carbon and negatively at the oxygen.

Applied to molecular ions, this algorithm considers the actual location of the formal (ionic) charge, as drawn in the Lewis structure. As an example, summing bond orders in the ammonium cation yields −4 at the nitrogen of formal charge +1, with the two numbers adding to the oxidation state of −3:

The sum of oxidation states in the ion equals its charge (as it equals zero for a neutral molecule).

Also in anions, the formal (ionic) charges have to be considered when nonzero. For sulfate this is exemplified with the skeletal or Lewis structures (top), compared with the bond-order formula of all oxygens equivalent and fulfilling the octet and $8 - N$ rules (bottom):

Applied to bond graph

A bond graph in solid-state chemistry is a chemical formula of an extended structure, in which direct bonding connectivities are shown. An example is the AuORb₃ perovskite, the unit cell of which is drawn on the left and the bond graph (with added numerical values) on the right:

We see that the oxygen atom bonds to the six nearest rubidium cations, each of which has 4 bonds to the auride anion. The bond graph summarizes these connectivities. The bond orders (also called bond valences) sum up to oxidation states according to the attached sign of the bond's ionic approximation (there are no formal charges in bond graphs).

Determination of oxidation states from a bond graph can be illustrated on ilmenite, FeTiO₃. We may ask whether the mineral contains Fe²⁺ and Ti⁴⁺, or Fe³⁺ and Ti³⁺. Its crystal structure has each metal atom bonded to six oxygens and each of the equivalent oxygens to two irons and two titaniums, as in the bond graph below. Experimental data show that three metal-oxygen bonds in the octahedron are short and three are long (the metals are off-center). The bond orders (valences), obtained from the bond lengths by the bond valence method, sum up to 2.01 at Fe and 3.99 at Ti; which can be rounded off to oxidation states +2 and +4, respectively:

Balancing redox

Oxidation states can be useful for balancing chemical equations for oxidation-reduction (or redox) reactions, because the changes in the oxidized atoms have to be balanced by the changes in the reduced atoms. For example, in the reaction of acetaldehyde with Tollens' reagent to form acetic acid (shown below), the carbonyl carbon atom changes its oxidation state from +1 to +3 (loses two electrons). This oxidation is balanced by reducing two Ag⁺ cations to Ag⁰ (gaining two electrons in total).

An inorganic example is the Bettendorf reaction using tin dichloride (SnCl₂) to prove the presence of arsenite ions in a concentrated HCl extract. When arsenic(III) is present, a brown coloration appears forming a dark precipitate of arsenic, according to the following simplified reaction:

{\ce {2 As^3+ + 3 Sn^2+ -> 2 As^0 + 3 Sn^4+}}

Here three tin atoms are oxidized from oxidation state +2 to +4, yielding six electrons that reduce two arsenic atoms from oxidation state +3 to 0. The simple one-line balancing goes as follows: the two redox couples are written down as they react;

{\ce {As^3+ + Sn^2+ <=> As^0 + Sn^4+}}

One tin is oxidized from oxidation state +2 to +4, a two-electron step, hence 2 is written in front of the two arsenic partners. One arsenic is reduced from +3 to 0, a three-electron step, hence 3 goes in front of the two tin partners. An alternative three-line procedure is to write separately the half-reactions for oxidation and reduction, each balanced with electrons, and then to sum them up such that the electrons cross out. In general, these redox balances (the one-line balance or each half-reaction) need to be checked for the ionic and electron charge sums on both sides of the equation being indeed equal. If they are not equal, suitable ions are added to balance the charges and the non-redox elemental balance.

Appearances

Nominal oxidation states

A nominal oxidation state is a general term with two different definitions:

Electrochemical oxidation state represents a molecule or ion in the Latimer diagram or Frost diagram for its redox-active element. An example is the Latimer diagram for sulfur at pH 0 where the electrochemical oxidation state +2 for sulfur puts HS
₂O⁻
₃ between S and H₂SO₃:

Systematic oxidation state is chosen from close alternatives as a pedagogical description. An example is the oxidation state of phosphorus in H₃PO₃ (structurally diprotic HPO(OH)₂) taken nominally as +3, while Allen electronegativities of phosphorus and hydrogen suggest +5 by a narrow margin that makes the two alternatives almost equivalent:

Both alternative oxidation numbers for phosphorus make chemical sense, depending on which chemical property or reaction is emphasized. By contrast, a calculated alternative, such as the average (+4) does not.

Ambiguous oxidation states

Lewis formulae are rule-based approximations of chemical reality, as are Allen electronegativities. Still, oxidation states may seem ambiguous when their determination is not straightforward. If only an experiment can determine the oxidation state, the rule-based determination is ambiguous (insufficient). There are also truly dichotomous values that are decided arbitrarily.

Oxidation-state determination from resonance formulas

Seemingly ambiguous oxidation states are derived from a set of resonance formulas of equal weights for a molecule having heteronuclear bonds where the atom connectivity does not correspond to the number of two-electron bonds dictated by the 8 − N rule. An example is S₂N₂ where four resonance formulas featuring one S=N double bond have oxidation states +2 and +4 for the two sulfur atoms, which average to +3 because the two sulfur atoms are equivalent in this square-shaped molecule.

A physical measurement is needed to determine oxidation state

when a non-innocent ligand is present, of hidden or unexpected redox properties that could otherwise be assigned to the central atom. An example is the nickel dithiolate complex, Ni(S
₂C
₂H
₂)²⁻
₂.^[5]^{: 1056–1057}
when the redox ambiguity of a central atom and ligand yields dichotomous oxidation states of close stability, thermally induced tautomerism may result, as exemplified by manganese catecholate, Mn(C₆H₄O₂)₃.^[5]^{: 1057–1058} Assignment of such oxidation states requires spectroscopic,^[13] magnetic or structural data.
when the bond order has to be ascertained along with an isolated tandem of a heteronuclear and a homonuclear bond. An example is thiosulfate S
₂O²⁻
₃ having two possible oxidation states (bond orders are in blue and formal charges in green):

The S–S distance measurement in thiosulfate is needed to reveal that this bond order is very close to 1, as in the formula on the left.

Ambiguous/arbitrary oxidation states

when the electronegativity difference between two bonded atoms is very small (as in H₃PO₃). Two almost equivalent pairs of oxidation states, arbitrarily chosen, are obtained for these atoms.
when an electronegative p-block atom forms solely homonuclear bonds, the number of which differs from the number of two-electron bonds suggested by rules. Examples are homonuclear finite chains like N⁻
₃ (the central nitrogen connects two atoms with four two-electron bonds while only three two-electron bonds^[14] are required by 8 − N rule) or I⁻
₃ (the central iodine connects two atoms with two two-electron bonds while only one two-electron bond fulfills the 8 − N rule). A sensible approach is to distribute the ionic charge over the two outer atoms.^[5] Such a placement of charges in a polysulfide S²⁻
_n (where all inner sulfurs form two bonds, fulfilling the 8 − N rule) follows already from its Lewis structure.^[5]
when the isolated tandem of a heteronuclear and a homonuclear bond leads to a bonding compromise in between two Lewis structures of limiting bond orders. An example is N₂O:

The typical oxidation state of nitrogen in N₂O is +1, which also obtains for both nitrogens by a molecular orbital approach.^[15] The formal charges on the right comply with electronegativities, which implies an added ionic bonding contribution. Indeed, the estimated N−N and N−O bond orders are 2.76 and 1.9, respectively,^[5] approaching the formula of integer bond orders that would include the ionic contribution explicitly as a bond (in green):

Conversely, formal charges against electronegativities in a Lewis structure decrease the bond order of the corresponding bond. An example is carbon monoxide with a bond-order estimate of 2.6.^[16]

Fractional oxidation states

Fractional oxidation states are often used to represent the average oxidation state of several atoms of the same element in a structure. For example, the formula of magnetite is Fe
₃O
₄, implying an average oxidation state for iron of +8/3.^[17]^: 81–82 However, this average value may not be representative if the atoms are not equivalent. In a Fe
₃O
₄ crystal below 120 K (−153 °C), two-thirds of the cations are Fe³⁺
and one-third are Fe²⁺
, and the formula may be more clearly represented as FeO·Fe
₂O
₃.^[18]

Likewise, propane, C
₃H
₈, has been described as having a carbon oxidation state of −8/3.^[19] Again, this is an average value since the structure of the molecule is H
₃C−CH
₂−CH
₃, with the first and third carbon atoms each having an oxidation state of −3 and the central one −2.

An example with true fractional oxidation states for equivalent atoms is potassium superoxide, KO
₂. The diatomic superoxide ion O⁻
₂ has an overall charge of −1, so each of its two equivalent oxygen atoms is assigned an oxidation state of −1/2. This ion can be described as a resonance hybrid of two Lewis structures, where each oxygen has an oxidation state of 0 in one structure and −1 in the other.

For the cyclopentadienyl anion C
₅H⁻
₅, the oxidation state of C is −1 + −1/5 = −6/5. The −1 occurs because each carbon is bonded to one hydrogen atom (a less electronegative element), and the −1/5 because the total ionic charge of −1 is divided among five equivalent carbons. Again this can be described as a resonance hybrid of five equivalent structures, each having four carbons with oxidation state −1 and one with −2.

Examples of fractional oxidation states for carbon
Oxidation state	Example species
−6/5	C ₅H⁻ ₅
−6/7	C ₇H⁺ ₇
+3/2	C ₄O²⁻ ₄

Finally, fractional oxidation numbers are not used in the chemical nomenclature.^[20]^: 66 For example the red lead Pb
₃O
₄ is represented as lead(II,IV) oxide, showing the oxidation states of the two nonequivalent lead atoms.

Elements with multiple oxidation states

Most elements have more than one possible oxidation state. For example, carbon has nine possible integer oxidation states from −4 to +4:

Integer oxidation states of carbon
Oxidation state	Example compound
−4	CH ₄
−3	C ₂H ₆
−2	C ₂H ₄, CH ₃Cl
−1	C ₂H ₂, C ₆H ₆, (CH ₂OH) ₂
0	HCHO, CH ₂Cl ₂
+1	OCHCHO, CHCl ₂CHCl ₂
+2	HCOOH, CHCl ₃
+3	HOOCCOOH, C ₂Cl ₆
+4	CCl ₄, CO ₂

Oxidation state in metals

Many compounds with luster and electrical conductivity maintain a simple stoichiometric formula, such as the golden TiO, blue-black RuO₂ or coppery ReO₃, all of obvious oxidation state. Ultimately, assigning the free metallic electrons to one of the bonded atoms is not comprehensive and can yield unusual oxidation states. Examples are the LiPb and Cu
₃Au ordered alloys, the composition and structure of which are largely determined by atomic size and packing factors. Should oxidation state be needed for redox balancing, it is best set to 0 for all atoms of such an alloy.

List of oxidation states of the elements

This is a list of known oxidation states of the chemical elements, excluding nonintegral values. The most common states appear in bold. The table is based on that of Greenwood and Earnshaw,^[21] with additions noted. Every element exists in oxidation state 0 when it is the pure non-ionized element in any phase, whether monatomic or polyatomic allotrope. The column for oxidation state 0 only shows elements known to exist in oxidation state 0 in compounds.

Noble gas

+1 Bold values are main oxidation states

Oxidation states of the elements
Element			Negative states						Positive states									Group	Notes
Element			−5	−4	−3	−2	−1	0	+1	+2	+3	+4	+5	+6	+7	+8	+9	Group	Notes
Z
1	hydrogen	H					−1	0	+1									1	^[22]
2	helium	He						0										18	^[23]
3	lithium	Li						0	+1									1	^[24]^[25]
4	beryllium	Be						0	+1	+2								2	^[26]^[27]
5	boron	B	−5				−1	0	+1	+2	+3							13	^[28]^[29]^[30]
6	carbon	C		−4	−3	−2	−1	0	+1	+2	+3	+4						14
7	nitrogen	N			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[31]
8	oxygen	O				−2	−1	0	+1	+2								16
9	fluorine	F					−1	0										17	^[32]^[33]
10	neon	Ne						0										18	^[34]
11	sodium	Na					−1	0	+1									1	^[24]^[35]
12	magnesium	Mg						0	+1	+2								2	^[36]^[37]
13	aluminium	Al				−2	−1	0	+1	+2	+3							13	^[38]^[39]^[40]^[41]
14	silicon	Si		−4	−3	−2	−1	0	+1	+2	+3	+4						14	^[42]
15	phosphorus	P			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[43]
16	sulfur	S				−2	−1	0	+1	+2	+3	+4	+5	+6				16
17	chlorine	Cl					−1	0	+1	+2	+3	+4	+5	+6	+7			17	^[44]^[45]
18	argon	Ar						0										18	^[46]
19	potassium	K					−1		+1									1	^[24]
20	calcium	Ca							+1	+2								2	^[47]^[48]
21	scandium	Sc						0	+1	+2	+3							3	^[49]^[50]^[51]
22	titanium	Ti				−2	−1	0	+1	+2	+3	+4						4	^[52]^[53]^[54]^[55]
23	vanadium	V			−3		−1	0	+1	+2	+3	+4	+5					5	^[53]
24	chromium	Cr		−4		−2	−1	0	+1	+2	+3	+4	+5	+6				6	^[53]
25	manganese	Mn			−3		−1	0	+1	+2	+3	+4	+5	+6	+7			7	^[56]^[57]
26	iron	Fe		−4		−2	−1	0	+1	+2	+3	+4	+5	+6	+7			8	^[58]^[59]^[60]
27	cobalt	Co			−3		−1	0	+1	+2	+3	+4	+5					9	^[53]
28	nickel	Ni				−2	−1	0	+1	+2	+3	+4						10	^[61]
29	copper	Cu				−2		0	+1	+2	+3	+4						11	^[60]^[62]
30	zinc	Zn				−2		0	+1	+2								12	^[60]^[63]^[64]^[65]
31	gallium	Ga	−5	−4	−3	−2	−1	0	+1	+2	+3							13	^[39]^[66]^[67]^[68]
32	germanium	Ge		−4	−3	−2	−1	0	+1	+2	+3	+4						14	^[69]^[42]
33	arsenic	As			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[39]^[70]^[71]^[72]
34	selenium	Se				−2	−1	0	+1	+2	+3	+4	+5	+6				16	^[73]^[74]^[75]^[76]^[77]
35	bromine	Br					−1	0	+1	+2	+3	+4	+5		+7			17	^[78]^[79]
36	krypton	Kr						0	+1	+2								18
37	rubidium	Rb					−1		+1									1	^[24]
38	strontium	Sr							+1	+2								2	^[80]^[48]
39	yttrium	Y						0	+1	+2	+3							3	^[81]^[82]^[83]
40	zirconium	Zr				−2		0	+1	+2	+3	+4						4	^[53]^[84]^[85]
41	niobium	Nb			−3		−1	0	+1	+2	+3	+4	+5					5	^[53]^[86]^[87]
42	molybdenum	Mo		−4		−2	−1	0	+1	+2	+3	+4	+5	+6				6	^[53]
43	technetium	Tc					−1	0	+1	+2	+3	+4	+5	+6	+7			7	^[88]
44	ruthenium	Ru		−4		−2		0	+1	+2	+3	+4	+5	+6	+7	+8		8	^[53]^[60]
45	rhodium	Rh			−3		−1	0	+1	+2	+3	+4	+5	+6	+7			9	^[53]^[89]^[90]
46	palladium	Pd						0	+1	+2	+3	+4	+5					10	^[91]^[92]^[93]^[94]
47	silver	Ag				−2	−1	0	+1	+2	+3							11	^[60]^[95]^[96]
48	cadmium	Cd				−2			+1	+2								12	^[60]^[97]
49	indium	In	−5			−2	−1	0	+1	+2	+3							13	^[39]^[98]^[99]^[100]
50	tin	Sn		−4	−3	−2	−1	0	+1	+2	+3	+4						14	^[39]^[101]^[102]^[42]
51	antimony	Sb			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[39]^[103]^[104]^[105]^[106]
52	tellurium	Te				−2	−1	0	+1	+2	+3	+4	+5	+6				16	^[39]^[107]^[108]^[109]^[110]
53	iodine	I					−1	0	+1	+2	+3	+4	+5	+6	+7			17	^[111]^[112]^[113]^[114]
54	xenon	Xe						0		+2		+4		+6		+8		18	^[115]^[116]^[117]
55	caesium	Cs					−1		+1									1	^[24]
56	barium	Ba							+1	+2								2	^[118]^[48]
57	lanthanum	La						0	+1	+2	+3							f-block groups	^[81]^[119]
58	cerium	Ce								+2	+3	+4						f-block groups
59	praseodymium	Pr						0	+1	+2	+3	+4	+5					f-block groups	^[81]^[120]^[121]^[122]
60	neodymium	Nd						0		+2	+3	+4						f-block groups	^[81]^[123]
61	promethium	Pm								+2	+3							f-block groups	^[124]
62	samarium	Sm						0	+1	+2	+3							f-block groups	^[125]
63	europium	Eu						0		+2	+3							f-block groups	^[81]
64	gadolinium	Gd						0	+1	+2	+3							f-block groups	^[81]
65	terbium	Tb						0	+1	+2	+3	+4						f-block groups	^[81]^[119]^[124]
66	dysprosium	Dy						0		+2	+3	+4						f-block groups	^[81]^[126]
67	holmium	Ho						0		+2	+3							f-block groups	^[81]^[124]
68	erbium	Er						0		+2	+3							f-block groups	^[81]^[124]
69	thulium	Tm						0	+1	+2	+3							f-block groups	^[81]^[119]
70	ytterbium	Yb						0	+1	+2	+3							f-block groups	^[81]^[119]
71	lutetium	Lu						0		+2	+3							3	^[81]^[124]
72	hafnium	Hf				−2		0	+1	+2	+3	+4						4	^[53]^[85]^[127]
73	tantalum	Ta			−3		−1	0	+1	+2	+3	+4	+5					5	^[53]^[87]
74	tungsten	W		−4		−2	−1	0	+1	+2	+3	+4	+5	+6				6	^[53]
75	rhenium	Re			−3		−1	0	+1	+2	+3	+4	+5	+6	+7			7	^[128]
76	osmium	Os		−4		−2	−1	0	+1	+2	+3	+4	+5	+6	+7	+8		8	^[60]^[129]
77	iridium	Ir			−3	−2	−1	0	+1	+2	+3	+4	+5	+6	+7	+8	+9	9	^[130]^[131]^[132]^[133]^[134]
78	platinum	Pt			−3	−2	−1	0	+1	+2	+3	+4	+5	+6				10	^[60]^[135]^[136]
79	gold	Au			−3	−2	−1	0	+1	+2	+3		+5					11	^[60]^[137]
80	mercury	Hg				−2			+1	+2								12	^[60]^[138]
81	thallium	Tl	−5			−2	−1		+1	+2	+3							13	^[39]^[139]^[140]^[141]
82	lead	Pb		−4		−2	−1	0	+1	+2	+3	+4						14	^[39]^[142]^[143]^[144]
83	bismuth	Bi			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[145]^[146]^[147]^[148]^[149]
84	polonium	Po				−2				+2		+4	+5	+6				16	^[150]
85	astatine	At					−1		+1		+3		+5		+7			17
86	radon	Rn								+2				+6				18	^[151]^[152]^[153]
87	francium	Fr							+1									1
88	radium	Ra								+2								2
89	actinium	Ac									+3							f-block groups
90	thorium	Th					−1		+1	+2	+3	+4						f-block groups	^[154]^[155]^[156]
91	protactinium	Pa								+2	+3	+4	+5					f-block groups	^[157]
92	uranium	U					−1		+1	+2	+3	+4	+5	+6				f-block groups	^[158]^[159]^[160]
93	neptunium	Np								+2	+3	+4	+5	+6	+7			f-block groups	^[161]
94	plutonium	Pu								+2	+3	+4	+5	+6	+7	+8		f-block groups	^[162]^[163]
95	americium	Am								+2	+3	+4	+5	+6	+7			f-block groups	^[164]
96	curium	Cm									+3	+4	+5	+6				f-block groups	^[165]^[166]^[167]^[168]
97	berkelium	Bk								+2	+3	+4	+5					f-block groups	^[165]^[166]^[169]^[170]^[171]
98	californium	Cf								+2	+3	+4	+5					f-block groups	^[165]^[166]
99	einsteinium	Es								+2	+3	+4						f-block groups	^[172]
100	fermium	Fm								+2	+3							f-block groups
101	mendelevium	Md								+2	+3							f-block groups
102	nobelium	No								+2	+3							f-block groups
103	lawrencium	Lr									+3							3
104	rutherfordium	Rf										+4						4
105	dubnium	Db											+5					5	^[173]
106	seaborgium	Sg						0						+6				6	^[174]^[175]
107	bohrium	Bh													+7			7	^[176]
108	hassium	Hs														+8		8	^[177]
109	meitnerium	Mt																9
110	darmstadtium	Ds																10
111	roentgenium	Rg																11
112	copernicium	Cn								+2								12	^[178]
113	nihonium	Nh																13
114	flerovium	Fl																14
115	moscovium	Mc																15
116	livermorium	Lv																16
117	tennessine	Ts																17
118	oganesson	Og																18

Early forms (octet rule)

A figure with a similar format was used by Irving Langmuir in 1919 in one of the early papers about the octet rule.^[179] The periodicity of the oxidation states was one of the pieces of evidence that led Langmuir to adopt the rule.

Use in nomenclature

The oxidation state in compound naming for transition metals and lanthanides and actinides is placed either as a right superscript to the element symbol in a chemical formula, such as Fe^III or in parentheses after the name of the element in chemical names, such as iron(III). For example, Fe
₂(SO
₄)
₃ is named iron(III) sulfate and its formula can be shown as Fe^III
₂(SO
₄)
₃. This is because a sulfate ion has a charge of −2, so each iron atom takes a charge of +3.

History of the oxidation state concept

Early days

Oxidation itself was first studied by Antoine Lavoisier, who defined it as the result of reactions with oxygen (hence the name).^[180]^[181] The term has since been generalized to imply a formal loss of electrons. Oxidation states, called oxidation grades by Friedrich Wöhler in 1835,^[182] were one of the intellectual stepping stones that Dmitri Mendeleev used to derive the periodic table. William B. Jensen^[183] gives an overview of the history up to 1938.

Use in nomenclature

When it was realized that some metals form two different binary compounds with the same nonmetal, the two compounds were often distinguished by using the ending -ic for the higher metal oxidation state and the ending -ous for the lower. For example, FeCl₃ is ferric chloride and FeCl₂ is ferrous chloride. This system is not very satisfactory (although sometimes still used) because different metals have different oxidation states which have to be learned: ferric and ferrous are +3 and +2 respectively, but cupric and cuprous are +2 and +1, and stannic and stannous are +4 and +2. Also, there was no allowance for metals with more than two oxidation states, such as vanadium with oxidation states +2, +3, +4, and +5.^[17]^: 84

This system has been largely replaced by one suggested by Alfred Stock in 1919^[184] and adopted^[185] by IUPAC in 1940. Thus, FeCl₂ was written as iron(II) chloride rather than ferrous chloride. The Roman numeral II at the central atom came to be called the "Stock number" (now an obsolete term), and its value was obtained as a charge at the central atom after removing its ligands along with the electron pairs they shared with it.^[20]^: 147

Development towards the current concept

The term "oxidation state" in English chemical literature was popularized by Wendell Mitchell Latimer in his 1938 book about electrochemical potentials.^[186] He used it for the value (synonymous with the German term Wertigkeit) previously termed "valence", "polar valence" or "polar number"^[187] in English, or "oxidation stage" or indeed^[188]^[189] the "state of oxidation". Since 1938, the term "oxidation state" has been connected with electrochemical potentials and electrons exchanged in redox couples participating in redox reactions. By 1948, IUPAC used the 1940 nomenclature rules with the term "oxidation state",^[190]^[191] instead of the original^[185] valency. In 1948 Linus Pauling proposed that oxidation number could be determined by extrapolating bonds to being completely ionic in the direction of electronegativity.^[192] A full acceptance of this suggestion was complicated by the fact that the Pauling electronegativities as such depend on the oxidation state and that they may lead to unusual values of oxidation states for some transition metals. In 1990 IUPAC resorted to a postulatory (rule-based) method to determine the oxidation state.^[193] This was complemented by the synonymous term oxidation number as a descendant of the Stock number introduced in 1940 into the nomenclature. However, the terminology using "ligands"^[20]^: 147 gave the impression that oxidation number might be something specific to coordination complexes. This situation and the lack of a real single definition generated numerous debates about the meaning of oxidation state, suggestions about methods to obtain it and definitions of it. To resolve the issue, an IUPAC project (2008-040-1-200) was started in 2008 on the "Comprehensive Definition of Oxidation State", and was concluded by two reports^[5]^[4] and by the revised entries "Oxidation State"^[6] and "Oxidation Number"^[7] in the IUPAC Gold Book. The outcomes were a single definition of oxidation state and two algorithms to calculate it in molecular and extended-solid compounds, guided by Allen electronegativities that are independent of oxidation state.

References

↑ Wang, G.; Zhou, M.; Goettel, G. T.; Schrobilgen, G. J.; Su, J.; Li, J.; Schlöder, T.; Riedel, S. (2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786. S2CID 4463905.
↑ Yu, Haoyu S.; Truhlar, Donald G. (2016). "Oxidation State 10 Exists". Angewandte Chemie International Edition. 55 (31): 9004–9006. doi:10.1002/anie.201604670. PMID 27273799.
↑ Schroeder, Melanie, Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden (in German), p. 139, archived from the original on 2020-08-06, retrieved 2020-02-24
1 2 3 4 Karen, P.; McArdle, P.; Takats, J. (2016). "Comprehensive definition of oxidation state (IUPAC Recommendations 2016)". Pure Appl. Chem. 88 (8): 831–839. doi:10.1515/pac-2015-1204. hdl:10852/59520. S2CID 99403810.
1 2 3 4 5 6 7 8 Karen, P.; McArdle, P.; Takats, J. (2014). "Toward a comprehensive definition of oxidation state (IUPAC Technical Report)". Pure Appl. Chem. 86 (6): 1017–1081. doi:10.1515/pac-2013-0505.
1 2 3 IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation state". doi:10.1351/goldbook.O04365
1 2 IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation number". doi:10.1351/goldbook.O04363
1 2 3 Karen, Pavel (2015). "Oxidation State, A Long-Standing Issue!". Angewandte Chemie International Edition. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.
↑ Hooydonk, G. (1974). O n an Ionic Approximation to Chemical Bonding, Zeitschrift für Naturforschung A, 29(5), 763-767. doi: https://doi.org/10.1515/zna-1974-0517 Archived 2018-06-12 at the Wayback Machine
↑ "Oxidation state". IUPAC Compendium of Chemical Terminology. 2009. doi:10.1351/goldbook.O04365. ISBN 978-0-9678550-9-7.
↑ Pure and Applied Chemistry (2014), 86(6), 1017–1081 CODEN: PACHAS; ISSN 0033-4545. English.
↑ Muir, K. W.; Ibers, J. A. (1969). "The structure of chlorocarbonyl(sulfur dioxide)bis(triphenylphosphine)rhodium, (RhCl(CO)(SO2)(P(C6H5)3 2)". Inorg. Chem. 8 (9): 1921–1928. doi:10.1021/ic50079a024.
↑ Jørgensen, C. K. (1966). "Electric Polarizability, Innocent Ligands and Spectroscopic Oxidation States". Structure and Bonding. Vol. 1. Berlin: Springer-Verlag. pp. 234–248.
↑ "The Two-Electron Bond". Chemistry LibreTexts. June 25, 2016. Archived from the original on February 9, 2021. Retrieved September 1, 2020.
↑ Karen, P. (2015). "Oxidation state, a long-standing issue!". Angew. Chem. Int. Ed. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.
↑ Martinie, R. J.; Bultema, J. J.; Wal, M. N. V.; Burkhart, B. J.; Griend, D. A. V.; DeCock, R. L. (2011). "Bond order and chemical properties of BF, CO, and N₂". J. Chem. Educ. 88 (8): 1094–1097. Bibcode:2011JChEd..88.1094M. doi:10.1021/ed100758t.
1 2 Petrucci, R. H.; Harwood, W. S.; Herring, F. G. (2002). General Chemistry (8th ed.). Prentice-Hall. ISBN 978-0-13-033445-9.
↑ Senn, M. S.; Wright, J. P.; Attfield, J. P. (2012). "Charge order and three-site distortions in the Verwey structure of magnetite" (PDF). Nature. 481 (7380): 173–6. Bibcode:2012Natur.481..173S. doi:10.1038/nature10704. hdl:20.500.11820/1b3bb558-52d5-419f-9944-ab917dc95f5e. PMID 22190035. S2CID 4425300. Archived (PDF) from the original on 2022-10-09.
↑ Whitten, K. W.; Galley, K. D.; Davis, R. E. (1992). General Chemistry (4th ed.). Saunders. p. 147. ISBN 978-0-03-075156-1.
1 2 3 Connelly, N. G.; Damhus, T.; Hartshorn, R. M.; Hutton, A. T. Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005) (PDF). RSC Publishing. Archived (PDF) from the original on 2022-10-09.
↑ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 27–28. ISBN 978-0-08-037941-8.
↑ H(0) is found in dihydrogen complexes.
↑ Disodium helide, (Na⁺)₂He(e^-)₂, has been synthesized at high pressure, see Dong, Xiao; Oganov, Artem R.; Goncharov, Alexander F.; Stavrou, Elissaios; Lobanov, Sergey; Saleh, Gabriele; Qian, Guang-Rui; Zhu, Qiang; Gatti, Carlo; Deringer, Volker L.; Dronskowski, Richard; Zhou, Xiang-Feng; Prakapenka, Vitali B.; Konôpková, Zuzana; Popov, Ivan A.; Boldyrev, Alexander I.; Wang, Hui-Tian (6 February 2017). "A stable compound of helium and sodium at high pressure". Nature Chemistry. 9 (5): 440–445. arXiv:1309.3827. Bibcode:2017NatCh...9..440D. doi:10.1038/nchem.2716. PMID 28430195. S2CID 20459726.
1 2 3 4 5 Na(−1), K(−1), Rb(−1), and Cs(−1) are known in alkalides; the table by Greenwood and Earnshaw shows −1 only for Na and also erroneously for Li; no lithides are described.
↑ Li(0) atoms have been observed in various small lithium-chloride clusters; see Milovanović, Milan; Veličković, Suzana; Veljkovićb, Filip; Jerosimić, Stanka (October 30, 2017). "Structure and stability of small lithium-chloride Li_nCl_m^(0,1+) (n ≥ m, n = 1–6, m = 1–3) clusters". Physical Chemistry Chemical Physics. 19 (45): 30481–30497. doi:10.1039/C7CP04181K. PMID 29114648.
↑ Be(0) has been observed; see "Beryllium(0) Complex Found". Chemistry Europe. 13 June 2016.
↑ Be(I) has been observed in beryllium monohydride (BeH); see Shayesteh, A.; Tereszchuk, K.; Bernath, P. F.; Colin, R. (2003). "Infrared Emission Spectra of BeH and BeD" (PDF). J. Chem. Phys. 118 (3): 1158. Bibcode:2003JChPh.118.1158S. doi:10.1063/1.1528606. Archived from the original (PDF) on 2007-12-02. Retrieved 2007-12-10. and in [(CAAC)₂Be]^+• [CAAC = cyclic (alkyl)(amino)carbene], see Wang, Guocang; Walley, Jacob E.; Dickie, Diane E.; Pan, Sudip; Frenking, Gernot; Gilliard Jr., Robert G. (2020). "A Stable, Crystalline Beryllium Radical Cation". J. Am. Chem. Soc. 142 (10): 4560–4. doi:10.1021/jacs.9b13777. PMID 32088963. S2CID 211262005. Retrieved 2020-11-17.
↑ B(−5) has been observed in Al₃BC, see Schroeder, Melanie. "Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden" (in German). p. 139.
↑ B(−1) has been observed in magnesium diboride (MgB₂), see Keeler, James; Wothers, Peter (2014). Chemical Structure and Reactivity: An Integrated Approach. Oxford University Press. ISBN 9780199604135.
↑ B(0) has been observed in diborynes, see Braunschweig, H.; Dewhurst, R. D.; Hammond, K.; Mies, J.; Radacki, K.; Vargas, A. (2012). "Ambient-Temperature Isolation of a Compound with a Boron-Boron Triple Bond". Science. 336 (6087): 1420–1422. Bibcode:2012Sci...336.1420B. doi:10.1126/science.1221138. PMID 22700924. S2CID 206540959.
↑ Tetrazoles contain a pair of double-bonded nitrogen atoms with oxidation state 0 in the ring. A Synthesis of the parent 1H-tetrazole, CH₂N₄ (two atoms N(0)) is given in Henry, Ronald A.; Finnegan, William G. (1954). "An Improved Procedure for the Deamination of 5-Aminotetrazole". J. Am. Chem. Soc. 76 (1): 290–291. doi:10.1021/ja01630a086.
↑ Gold heptafluoride is calculated to be the pentafluoride with a molecular F₂ ligand. Himmel, Daniel; Riedel, Sebastian (2007). "After 20 Years, Theoretical Evidence That 'AuF₇' Is Actually AuF₅•F₂". Inorganic Chemistry. 46 (13): 5338–5342. doi:10.1021/ic700431s. PMID 17511450.
↑ A cluster of elusive SF₆⁺ with helium atoms is known to have fluorine(0) atom as a ligand; see Albertini, Simon; Bergmeister, Stefan; Laimer, Felix; Martini, Paul; Gruber, Elisabeth; Zappa, Fabio; Ončák, Milan; Scheier, Paul; Echt, Olof (2021-04-22). "SF 6 + : Stabilizing Transient Ions in Helium Nanodroplets". The Journal of Physical Chemistry Letters. 12 (17): 4112–4117. doi:10.1021/acs.jpclett.1c01024. ISSN 1948-7185. PMC 8154854. PMID 33886323.
↑ Ne(0) has been observed in Cr(CO)₅Ne. Perutz, Robin N.; Turner, James J. (August 1975). "Photochemistry of the Group 6 hexacarbonyls in low-temperature matrices. III. Interaction of the pentacarbonyls with noble gases and other matrices". Journal of the American Chemical Society. 97 (17): 4791–4800. doi:10.1021/ja00850a001.
↑ The compound NaCl has been shown in experiments to exists in several unusual stoichiometries under high pressure, including Na₃Cl in which contains a layer of sodium(0) atoms; see Zhang, W.; Oganov, A. R.; Goncharov, A. F.; Zhu, Q.; Boulfelfel, S. E.; Lyakhov, A. O.; Stavrou, E.; Somayazulu, M.; Prakapenka, V. B.; Konôpková, Z. (2013). "Unexpected Stable Stoichiometries of Sodium Chlorides". Science. 342 (6165): 1502–1505. arXiv:1310.7674. Bibcode:2013Sci...342.1502Z. doi:10.1126/science.1244989. PMID 24357316. S2CID 15298372.
↑ Low valent magnesium compounds with Mg(I) have been obtained using bulky ligands; see Green, S. P.; Jones C.; Stasch A. (December 2007). "Stable Magnesium(I) Compounds with Mg-Mg Bonds". Science. 318 (5857): 1754–1757. Bibcode:2007Sci...318.1754G. doi:10.1126/science.1150856. PMID 17991827. S2CID 40657565.
↑ Mg(0) has been synthesized in a compound containing a Na₂Mg₂²⁺ cluster coordinated to a bulky organic ligand; see Rösch, B.; Gentner, T. X.; Eyselein, J.; Langer, J.; Elsen, H.; Li, W.; Harder, S. (2021). "Strongly reducing magnesium(0) complexes". Nature. 592 (7856): 717–721. Bibcode:2021Natur.592..717R. doi:10.1038/s41586-021-03401-w. PMID 33911274. S2CID 233447380
↑ Al(II) has been observed in aluminium(II) oxide (AlO); see Tyte, D.C. (1964). "Red (B2Π–A2σ) Band System of Aluminium Monoxide". Nature. 202 (4930): 383–384. Bibcode:1964Natur.202..383T. doi:10.1038/202383a0. S2CID 4163250, and in dialanes (R₂Al—AlR₂); see Uhl, Werner (2004). "Organoelement Compounds Possessing Al—Al, Ga—Ga, In—In, and Tl—Tl Single Bonds". Advances in Organometallic Chemistry. 51: 53–108. doi:10.1016/S0065-3055(03)51002-4.
1 2 3 4 5 6 7 8 9 Negative oxidation states of p-block metals (Al, Ga, In, Sn, Tl, Pb, Bi, Po) and metalloids (Si, Ge, As, Sb, Te, At) may occur in Zintl phases, see: Riedel, Erwin, ed. (2007). Moderne Anorganische Chemie (in German). p. 259, and "Vorlesung Intermetallische Phasen § 6.2 Binäre Zintl-Phasen" (in German).
↑ Unstable carbonyl of Al(0) has been detected in reaction of Al₂(CH₃)₆ with carbon monoxide; see Sanchez, Ramiro; Arrington, Caleb; Arrington Jr., C. A. (December 1, 1989). "Reaction of trimethylaluminum with carbon monoxide in low-temperature matrixes". American Chemical Society. 111 (25): 9110-9111. doi:10.1021/ja00207a023. OSTI 6973516.
↑ Al(−2) has been observed in Sr₁₄[Al₄]₂[Ge]₃, see Wemdorff, Marco; Röhr, Caroline (2007). "Sr₁₄[Al₄]₂[Ge]₃: Eine Zintl-Phase mit isolierten [Ge]^4–- und [Al₄]^8–-Anionen / Sr₁₄[Al₄]₂[Ge]₃: A Zintl Phase with Isolated [Ge]^4–- and [Al₄]^8– Anions". Zeitschrift für Naturforschung B (in German). 62 (10): 1227. doi:10.1515/znb-2007-1001. S2CID 94972243.
1 2 3 "New Type of Zero-Valent Tin Compound". Chemistry Europe. 27 August 2016.
↑ P(0) has been observed, see Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; King, R. Bruce; Schaefer, Iii; Schleyer, Paul v. R.; Robinson, Gregory H. (2008). "Carbene-Stabilized Diphosphorus". Journal of the American Chemical Society. 130 (45): 14970–1. doi:10.1021/ja807828t. PMID 18937460.
↑ Chlorine(0) is present as dichlorine in {SnCl₆^2--Cl₂}_x and {PbCl₆^2--Cl₂}_x polymeric anion complexes see Usoltsev, Andrey N.; Korobeynikov, Nikita A.; Kolesov, Boris A.; Novikov, Alexander S.; Samsonenko, Denis G.; Fedin, Vladimir P.; Sokolov, Maxim N.; Adonin, Sergey A. (February 24, 2021). "Rule, Not Exclusion: Formation of Dichlorine-Containing Supramolecular Complexes with Chlorometalates(IV)". Inorg. Chem. 60 (6): 4171–4177. doi:10.1021/acs.inorgchem.1c00436. PMID 33626273. S2CID 232047538.
↑ The equilibrium Cl₂O₆⇌2ClO₃ is mentioned by Greenwood and Earnshaw, but it has been refuted, see Lopez, Maria; Juan E. Sicre (1990). "Physicochemical properties of chlorine oxides. 1. Composition, ultraviolet spectrum, and kinetics of the thermolysis of gaseous dichlorine hexoxide". J. Phys. Chem. 94 (9): 3860–3863. doi:10.1021/j100372a094., and Cl₂O₆ is actually chlorine(V,VII) oxide. However, ClO₃ has been observed, see Grothe, Hinrich; Willner, Helge (1994). "Chlorine Trioxide: Spectroscopic Properties, Molecular Structure, and Photochemical Behavior". Angew. Chem. Int. Ed. 33 (14): 1482–1484. doi:10.1002/anie.199414821.
↑ Ar(0) has been observed in argon fluorohydride (HArF) and ArCF₂²⁺, see Lockyear, J.F.; Douglas, K.; Price, S.D.; Karwowska, M.; et al. (2010). "Generation of the ArCF₂²⁺ Dication". Journal of Physical Chemistry Letters. 1: 358. doi:10.1021/jz900274p.
↑ Ca(I) has been observed; see Krieck, Sven; Görls, Helmar; Westerhausen, Matthias (2010). "Mechanistic Elucidation of the Formation of the Inverse Ca(I) Sandwich Complex [(thf)₃Ca(μ-C₆H₃-1,3,5-Ph₃)Ca(thf)₃] and Stability of Aryl-Substituted Phenylcalcium Complexes". Journal of the American Chemical Society. 132 (35): 12492–501. doi:10.1021/ja105534w. PMID 20718434.
1 2 3 Octacarbonyl complexes isolated of Ca, Sr, Ba have been observed in a neon matrix, but it remains unclear whether these are metal(0) complexes because calculations disagree whether the metal is covalently or ionically bonded to the ligands; see Wu, X.; Zhao, L.; Jin, J.; Pan, S.; Li, W.; Jin, X.; Wang, G.; Zhou, M.; Frenking, G. (2018). "Observation of alkaline earth complexes M(CO)8 (M = Ca, Sr, or Ba) that mimic transition metals". Science. 361 (6405): 912–916. Bibcode:2018Sci...361..912W. doi:10.1126/science.aau0839. PMID 30166489. S2CID 52131470
↑ Sc(0) has been observed; see F. Geoffrey N. Cloke; Karl Khan & Robin N. Perutz (1991). "η-Arene complexes of scandium(0) and scandium(II)". J. Chem. Soc., Chem. Commun. (19): 1372–1373. doi:10.1039/C39910001372.
↑ Sc(I) has been observed; see Polly L. Arnold; F. Geoffrey; N. Cloke; Peter B. Hitchcock & John F. Nixon (1996). "The First Example of a Formal Scandium(I) Complex: Synthesis and Molecular Structure of a 22-Electron Scandium Triple Decker Incorporating the Novel 1,3,5-Triphosphabenzene Ring". J. Am. Chem. Soc. 118 (32): 7630–7631. doi:10.1021/ja961253o.
↑ Sc(II) has been observed; see Woen, David H.; Chen, Guo P.; Ziller, Joseph W.; Boyle, Timothy J.; Furche, Filipp; Evans, William J. (January 2017). "Solution Synthesis, Structure, and CO Reduction Reactivity of a Scandium(II) Complex". Angewandte Chemie International Edition. 56 (8): 2050–2053. doi:10.1002/anie.201611758. PMID 28097771.
↑ Ti(I) has been observed in [Ti(η⁶-1,3,5-C₆H₃ⁱPr₃)2][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂); see Calderazzo, Fausto; Ferri, Isabella; Pampaloni, Guido; Englert, Ulli; Green, Malcolm L. H. (1997). "Synthesis of [Ti(η⁶-1,3,5-C₆H₃iPr₃)₂][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂), the First Titanium(I) Derivatives". Organometallics. 16 (14): 3100–3101. doi:10.1021/om970155o.
1 2 3 4 5 6 7 8 9 10 11 12 Ti(−2), V(−3), Cr(−4), Co(−3), Zr(−2), Nb(−3), Mo(−4), Ru(−2), Rh(−3), Hf(−2), Ta(−3), and W(−4) occur in anionic binary metal carbonyls; see Christian Bach (January 1999). Carbonylkomplexe der Platinmetalle [Carbonyl complexes of the platinum metals] (Doctor of Science) (in German). p. 4.; Werner, Helmut (2008). Landmarks in Organo-Transition Metal Chemistry: A Personal View. Springer Science & Business Media. pp. 97–100. ISBN 978-0-387-09848-7.; Haiduc, Ionel; Zuckerman, Jerry J. (2011). Basic Organometallic Chemistry: Containing Comprehensive Bibliography. Walter de Gruyter. p. 239. ISBN 978-0-89925-006-9.
↑ Ti(−1) has been reported in [Ti(bipy)₃]⁻, but was later shown to be Ti(+3); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–2256. doi:10.1021/ic302799s. PMID 23387926. However, Ti(−1) occurs in [Ti(η-C₆H₆]⁻ and [Ti(η-C₆H₅CH₃)]⁻, see Bandy, J. A.; Berry, A.; Green, M. L. H.; Perutz, R. N.; Prout, K.; Verpeautz, J.-N. (1984). "Synthesis of anionic sandwich compounds: [Ti(η-C₆H₅R)₂]^– and the crystal structure of [K(18-crown-6)(µ-H)Mo(η-C₅H₅)₂]". Inorganic Chemistry. 52 (4): 729–731. doi:10.1039/C39840000729.
↑ Jilek, Robert E.; Tripepi, Giovanna; Urnezius, Eugenijus; Brennessel, William W.; Young, Victor G. Jr.; Ellis, John E. (2007). "Zerovalent titanium–sulfur complexes. Novel dithiocarbamato derivatives of Ti(CO)₆: [Ti(CO)₄(S₂CNR₂)]⁻". Chem. Commun. (25): 2639–2641. doi:10.1039/B700808B. PMID 17579764.
↑ Mn(–3) and Mn(–1) occurs in Mn(NO)₃(CO) and HMn(CO)₅ respectively; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1046. ISBN 978-0-08-037941-8.
↑ Mn(–2) has been described erroneously by Greenwood as [MnPc]^2–; for a correct explanation, see Gcineka Mbambisa; Prudence Tau; Edith Antunes; Tebello Nyokong (2007). "Synthesis and electrochemical properties of purple manganese(III) and red titanium(IV) phthalocyanine complexes octa-substituted at non-peripheral positions with pentylthio groups". Polyhedron. 26 (18): 5355–5364. doi:10.1016/j.poly.2007.08.007.
↑ Fe(VII) has been observed in [FeO₄]⁻; see Lu, Jun-Bo; Jian, Jiwen; Huang, Wei; Lin, Hailu; Zhou, Mingfei (2016). "Experimental and theoretical identification of the Fe(VII) oxidation state in FeO₄⁻". Physical Chemistry Chemical Physics. 18 (45): 31125–31131. Bibcode:2016PCCP...1831125L. doi:10.1039/C6CP06753K. PMID 27812577.
↑ Fe(VIII) has been reported; see Yurii D. Perfiliev; Virender K. Sharma (2008). "Higher Oxidation States of Iron in Solid State: Synthesis and Their Mössbauer Characterization – Ferrates – ACS Symposium Series (ACS Publications)". Platinum Metals Review. 48 (4): 157–158. doi:10.1021/bk-2008-0985.ch007. However, its existence has been disputed.
1 2 3 4 5 6 7 8 9 10 Fe(−4), Ru(−4), and Os(−4) have been observed in metal-rich compounds containing octahedral complexes [MIn_6−xSn_x]; Pt(−3) (as a dimeric anion [Pt–Pt]⁶⁻), Cu(−2), Zn(−2), Ag(−2), Cd(−2), Au(−2), and Hg(−2) have been observed (as dimeric and monomeric anions; dimeric ions were initially reported to be [T–T]²⁻ for Zn, Cd, Hg, but later shown to be [T–T]⁴⁻ for all these elements) in La₂Pt₂In, La₂Cu₂In, Ca₅Au₃, Ca₅Ag₃, Ca₅Hg₃, Sr₅Cd₃, Ca₅Zn₃(structure (AE²⁺)₅(T–T)⁴⁻T²⁻⋅4e⁻), Yb₃Ag₂, Ca₅Au₄, and Ca₃Hg₂; Au(–3) has been observed in ScAuSn and in other 18-electron half-Heusler compounds. See Changhoon Lee; Myung-Hwan Whangbo (2008). "Late transition metal anions acting as p-metal elements". Solid State Sciences. 10 (4): 444–449. Bibcode:2008SSSci..10..444K. doi:10.1016/j.solidstatesciences.2007.12.001. and Changhoon Lee; Myung-Hwan Whangbo; Jürgen Köhler (2010). "Analysis of Electronic Structures and Chemical Bonding of Metal-rich Compounds. 2. Presence of Dimer (T–T)^4– and Isolated T^2– Anions in the Polar Intermetallic Cr₅B₃-Type Compounds AE₅T₃ (AE = Ca, Sr; T = Au, Ag, Hg, Cd, Zn)". Zeitschrift für Anorganische und Allgemeine Chemie. 636 (1): 36–40. doi:10.1002/zaac.200900421.
↑ Ni(−2) has been observed in Li₂[Ni(1,5-COD)₂], see Jonas, Klaus (1975). "Dilithium-Nickel-Olefin Complexes. Novel Bimetal Complexes Containing a Transition Metal and a Main Group Metal". Angew. Chem. Int. Ed. 14 (11): 752–753. doi:10.1002/anie.197507521. and Ellis, John E. (2006). "Adventures with Substances Containing Metals in Negative Oxidation States". Inorganic Chemistry. 45 (8): 3167–86. doi:10.1021/ic052110i. PMID 16602773.
↑ Cu(0) has been observed in Cu(tris[2-(diisopropylphosphino)- phenyl]borane), see Moret, Marc-Etienne; Zhang, Limei; Peters, Jonas C. (2013). "A Polar Copper–Boron One-Electron σ-Bond". J. Am. Chem. Soc. 135 (10): 3792–3795. doi:10.1021/ja4006578. PMID 23418750.
↑ Zn(0) has been observed; see Singh, Amit Pratap; Samuel, Prinson P.; Roesky, Herbert W.; Schwarzer, Martin C.; Frenking, Gernot; Sidhu, Navdeep S.; Dittrich, Birger (2013). "A Singlet Biradicaloid Zinc Compound and Its Nonradical Counterpart". J. Am. Chem. Soc. 135 (19): 7324–9. doi:10.1021/ja402351x. PMID 23600486. and Soleilhavoup, Michèle; Bertrand, Guy (2015). "Cyclic (Alkyl)(Amino)Carbenes (CAACs): Stable Carbenes on the Rise". Acc. Chem. Res. 48 (2): 256–266. doi:10.1021/ar5003494. PMID 25515548.
↑ Zn(I) has been observed in decamethyldizincocene (Zn₂(η⁵–C₅Me₅)₂); see Resa, I.; Carmona, E.; Gutierrez-Puebla, E.; Monge, A. (2004). "Decamethyldizincocene, a Stable Compound of Zn(I) with a Zn-Zn Bond". Science. 305 (5687): 1136–8. Bibcode:2004Sci...305.1136R. doi:10.1126/science.1101356. PMID 15326350. S2CID 38990338.
↑ Zn(III) has been predicted to be stable in compounds with highly stabilized borane-based trianions, but no Zn(III) candidates are known experimentally; see Hong Fang; Huta Banjade; Deepika; Puru Jena (2021). "Realization of the Zn3+ oxidation state". Nanoscale. 13 (33): 14041–14048. doi:10.1039/D1NR02816B. PMID 34477685. S2CID 237400349.
↑ Ga(−2), Ga(−4), and Ga(−5) have been observed in the magnesium gallides MgGa, Mg₂Ga, and Mg₅Ga₂, respectively; see Patrick Hofmann. "Colture. Ein Programm zur interaktiven Visualisierung von Festkörperstrukturen sowie Synthese, Struktur und Eigenschaften von binären und ternären Alkali- und Erdalkalimetallgalliden" (PDF) (in German). p. 72.
↑ Ga(−3) has been observed in LaGa, see Dürr, Ines; Bauer, Britta; Röhr, Caroline (2011). "Lanthan-Triel/Tetrel-ide La(Al,Ga)_x(Si,Ge)_1-x. Experimentelle und theoretische Studien zur Stabilität intermetallischer 1:1-Phasen" (PDF). Z. Naturforsch. (in German). 66b: 1107–1121.
↑ Ga(0) has been observed in Gallium monoiodide among other gallium's oxidation states
↑ Ge(−1), Ge(−2), and Ge(−3) have been observed in germanides; see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Germanium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. pp. 953–959. ISBN 978-3-11-012641-9.
↑ As(0) has been observed; see Abraham, Mariham Y.; Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; Shaefer III, Henry F.; Schleyer, P. von R.; Robinson, Gregory H. (2010). "Carbene Stabilization of Diarsenic: From Hypervalency to Allotropy". Chemistry: A European Journal. 16 (2): 432–5. doi:10.1002/chem.200902840. PMID 19937872.
↑ As(I) has been observed in arsenic(I) iodide (AsI); see Ellis, Bobby D.; MacDonald, Charles L. B. (2004). "Stabilized Arsenic(I) Iodide: A Ready Source of Arsenic Iodide Fragments and a Useful Reagent for the Generation of Clusters". Inorganic Chemistry. 43 (19): 5981–6. doi:10.1021/ic049281s. PMID 15360247.
↑ As(IV) has been observed in arsenic(IV) hydroxide (As(OH)₄) and HAsO⁻; see Kläning, Ulrik K.; Bielski, Benon H. J.; Sehested, K. (1989). "Arsenic(IV). A pulse-radiolysis study". Inorganic Chemistry. 28 (14): 2717–24. doi:10.1021/ic00313a007.
↑ Se(−1) has been observed in diselenides(2−) (Se₂²⁻).
↑ A Se(0) atom has been identified using DFT in [ReOSe(2-pySe)₃]; see Cargnelutti, Roberta; Lang, Ernesto S.; Piquini, Paulo; Abram, Ulrich (2014). "Synthesis and structure of [ReOSe(2-Se-py)3]: A rhenium(V) complex with selenium(0) as a ligand". Inorganic Chemistry Communications. 45: 48–50. doi:10.1016/j.inoche.2014.04.003. ISSN 1387-7003.
↑ Se(I) has been observed in selenium(I) chloride (Se₂Cl₂); see "Selenium: Selenium(I) chloride compound data". WebElements.com. Retrieved 2007-12-10.
↑ Se(III) has been observed in Se₂NBr₃; see Lau, Carsten; Neumüller, Bernhard; Vyboishchikov, Sergei F.; Frenking, Gernot; Dehnicke, Kurt; Hiller, Wolfgang; Herker, Martin (1996). "Se₂NBr₃, Se₂NCl₅, Se₂NCl⁻₆: New Nitride Halides of Selenium(III) and Selenium(IV)". Chemistry: A European Journal. 2 (11): 1393–1396. doi:10.1002/chem.19960021108.
↑ Se(V) has been observed in SeO−3 and HSeO2−4; see Kläning, Ulrik K.; Sehested, K. (1986). "Selenium(V). A pulse radiolysis study". Inorganic Chemistry. 90 (21): 5460–4. doi:10.1021/j100412a112.
↑ Bromine(0) is present as an adduct in a copper-bromine complex, see Okrut, Alexander; Feldmann, Claus (5 March 2008). "{[P(o-tolyl)3]Br}2[Cu2Br6](Br2)—An Ionic Compound Containing Molecular Bromine". Inorganic Chemistry. 47 (8): 3084–3087. doi:10.1021/ic7021038. PMID 18318489.
↑ Br(II) is known to occur in bromine monoxide radical; see
↑ Sr(I) has been observed in strontium monofluoride (SrF); see Colarusso, P.; Guo, B.; Zhang, K.-Q.; Bernath, P.F. (1996). "High-Resolution Infrared Emission Spectrum of Strontium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 175 (1): 158–171. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2012-03-08.
1 2 3 4 5 6 7 8 9 10 11 12 13 Yttrium and all lanthanides except Ce and Pm have been observed in the oxidation state 0 in bis(1,3,5-tri-t-butylbenzene) complexes, see Cloke, F. Geoffrey N. (1993). "Zero Oxidation State Compounds of Scandium, Yttrium, and the Lanthanides". Chem. Soc. Rev. 22: 17–24. doi:10.1039/CS9932200017. and Arnold, Polly L.; Petrukhina, Marina A.; Bochenkov, Vladimir E.; Shabatina, Tatyana I.; Zagorskii, Vyacheslav V.; Cloke (2003-12-15). "Arene complexation of Sm, Eu, Tm and Yb atoms: a variable temperature spectroscopic investigation". Journal of Organometallic Chemistry. 688 (1–2): 49–55. doi:10.1016/j.jorganchem.2003.08.028.
↑ Y(I) has been observed in yttrium(I) bromide (YBr); see Kaley A. Walker; Michael C. L. Gerry (1998). "The pure rotational spectrum of yttrium monobromide". The Journal of Chemical Physics. 109 (13): 5439–5445. doi:10.1063/1.477162.
↑ Y(II) has been observed in [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]; see MacDonald, M. R.; Ziller, J. W.; Evans, W. J. (2011). "Synthesis of a Crystalline Molecular Complex of Y²⁺, [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]". J. Am. Chem. Soc. 133 (40): 15914–17. doi:10.1021/ja207151y. PMID 21919538.
↑ Zr(−1) has been reported in [Zr(bipy)₃]⁻ (see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 960. ISBN 978-0-08-037941-8. and Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Zirconium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1413. ISBN 978-3-11-012641-9.), but was later shown to be Zr(+4); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–56. doi:10.1021/ic302799s. PMID 23387926.
1 2 Zr(0) and Hf(0) occur in (η⁶-(1,3,5-^tBu)₃C₆H₃)₂M (M=Zr, Hf) and [(η⁵-C₅R₅M(CO)₄]⁻, see Chirik, P. J.; Bradley, C. A. (2007). "4.06 - Complexes of Zirconium and Hafnium in Oxidation States 0 to ii". Comprehensive Organometallic Chemistry III. From Fundamentals to Applications. Vol. 4. Elsevier Ltd. pp. 697–739. doi:10.1016/B0-08-045047-4/00062-5. ISBN 9780080450476.
↑ Complexes of Nb(0) and Ta(0) have been observed, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (2003). "4.5.7. Niobium(0) and Tantalum(0)". In J. A. McCleverty; T.J. Meyer (eds.). Comprehensive Coordination Chemistry II: From Biology to Nanotechnology. Vol. 4 (2 ed.). Newnes. pp. 297–299. ISBN 978-0-08-091316-2.
1 2 Nb(I) and Ta(I) occur in CpNb(CO)₄ and CpTa(CO)₄, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Tantal". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1430. ISBN 978-3-11-012641-9. and King, R. Bruce (1969). Transition-Metal Organometallic Chemistry: An Introduction. Academic Press. p. 11. ISBN 978-0-32-315996-8.
↑ Tc(–1) occurs in HTc(CO)₅; see John E. Ellis (2003). "Metal Carbonyl Anions: from [Fe(CO)₄]₂^- to [Hf(CO)₆]₂^- and Beyond†". Organometallics. 22 (17): 3322–3338. doi:10.1021/om030105l. Tc(–3) is erroneously reported by Greenwood.
↑ George, G.N.; Klein, S.I.; Nixon, J.F. (1984). "Electron paramagnetic resonance spectroscopic studies on the zero-valent rhodium complex [Rh(P(OPrⁱ)₃)₄] at X-and Q-band frequencies". Chemical Physics Letters. 108 (6): 627–630. Bibcode:1984CPL...108..627G. doi:10.1016/0009-2614(84)85069-1.
↑ Rh(VII) is known in the RhO₃⁺ cation, see Da Silva Santos, Mayara; Stüker, Tony; Flach, Max; Ablyasova, Olesya S.; Timm, Martin; von Issendorff, Bernd; Hirsch, Konstantin; Zamudio‐Bayer, Vicente; Riedel, Sebastian; Lau, J. Tobias (2022). "The Highest Oxidation State of Rhodium: Rhodium(VII) in [RhO3]+". Angew. Chem. Int. Ed. 61 (38). doi:10.1002/anie.202207688. PMID 35818987. S2CID 250455408.
↑ Pd(I) has been observed; see Crabtree, R. H. (2002). "CHEMISTRY: A New Oxidation State for Pd?". Science. 295 (5553): 288–289. doi:10.1126/science.1067921. PMID 11786632. S2CID 94579227.
↑ Pd(III) has been observed; see Powers, D. C.; Ritter, T. (2011). "Palladium(III) in Synthesis and Catalysis" (PDF). Higher Oxidation State Organopalladium and Platinum Chemistry. Topics in Organometallic Chemistry. Vol. 35. pp. 129–156. Bibcode:2011hoso.book..129P. doi:10.1007/978-3-642-17429-2_6. ISBN 978-3-642-17428-5. PMC 3066514. PMID 21461129. Archived from the original (PDF) on June 12, 2013.
↑ Palladium(V) has been identified in complexes with organosilicon compounds containing pentacoordinate palladium; see Shimada, Shigeru; Li, Yong-Hua; Choe, Yoong-Kee; Tanaka, Masato; Bao, Ming; Uchimaru, Tadafumi (2007). "Multinuclear palladium compounds containing palladium centers ligated by five silicon atoms". Proceedings of the National Academy of Sciences. 104 (19): 7758–7763. doi:10.1073/pnas.0700450104. PMC 1876520. PMID 17470819.
↑ Palladium(VI) has been claimed to exist in Dagani, RON (2002). "New Palladium Oxidation State?". Chem. Eng. News. 80 (2): 8. doi:10.1021/cen-v080n002.p008., but this has been refuted showing it is a Palladium(II).
↑ The Ag⁻ ion has been observed in metal ammonia solutions: see Tran, N. E.; Lagowski, J. J. (2001). "Metal Ammonia Solutions: Solutions Containing Argentide Ions". Inorganic Chemistry. 40 (5): 1067–68. doi:10.1021/ic000333x.
↑ Ag(0) has been observed in carbonyl complexes in low-temperature matrices: see McIntosh, D.; Ozin, G. A. (1976). "Synthesis using metal vapors. Silver carbonyls. Matrix infrared, ultraviolet-visible, and electron spin resonance spectra, structures, and bonding of silver tricarbonyl, silver dicarbonyl, silver monocarbonyl, and disilver hexacarbonyl". J. Am. Chem. Soc. 98 (11): 3167–75. doi:10.1021/ja00427a018. Also, Ag(0) has been observed in [Ag₄py₂]_n, see Hoi Ri Moon; Cheol Ho Choi; Myunghyun Paik Suh (2008). "A Stair-Shaped Molecular Silver(0) Chain". Angewandte Chemie International Edition. 47 (44): 8390–93. doi:10.1002/anie.200803465. PMID 18830949.
↑ Cd(I) has been observed in cadmium(I) tetrachloroaluminate (Cd₂(AlCl₄)₂); see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Cadmium". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 1056–1057. ISBN 978-3-11-007511-3.
↑ In(–5) has been observed in La₃InGe, see Guloy, A. M.; Corbett, J. D. (1996). "Synthesis, Structure, and Bonding of Two Lanthanum Indium Germanides with Novel Structures and Properties". Inorganic Chemistry. 35 (9): 2616–22. doi:10.1021/ic951378e. PMID 11666477.
↑ In(−2) has been observed in Na₂In, see , p. 69.
↑ Unstable In(0) carbonyls and clusters have been detected, see , p. 6.
↑ Sn(−3) has been observed in [Sn₂]⁶⁻, e.g. in (Ba₂)⁴⁺(Mg₄)⁸⁺Sn⁴⁻(Sn₂)⁶⁻Sn²⁻ (with square (Sn²⁻)_n sheets), see Papoian, Garegin A.; Hoffmann, Roald (2000). "Hypervalent Bonding in One, Two, and Three Dimensions: Extending the Zintl–Klemm Concept to Nonclassical Electron-Rich Networks". Angew. Chem. Int. Ed. 2000 (39): 2408–2448. doi:10.1002/1521-3773(20000717)39:14<2408::aid-anie2408>3.0.co;2-u. PMID 10941096. Retrieved 2015-02-23.
↑ Sn(I) and Sn(III) have been observed in organotin compounds
↑ Sb(−2) has been observed in [Sb₂]⁴⁻, e.g. in RbBa₄[Sb₂][Sb][O], see Boss, Michael; Petri, Denis; Pickhard, Frank; Zönnchen, Peter; Röhr, Caroline (2005). "Neue Barium-Antimonid-Oxide mit den Zintl-Ionen [Sb]³⁻, [Sb₂]⁴⁻ und ¹_∞[Sb_n]ⁿ⁻ / New Barium Antimonide Oxides containing Zintl Ions [Sb]³⁻, [Sb₂]⁴⁻ and ¹_∞[Sb_n]ⁿ⁻". Zeitschrift für Anorganische und Allgemeine Chemie (in German). 631 (6–7): 1181–1190. doi:10.1002/zaac.200400546.
↑ Sb(0) has been observed, see Anastas Sidiropoulos (2019). "Studies of N-heterocyclic Carbene (NHC) Complexes of the Main Group Elements" (PDF). p. 39. doi:10.4225/03/5B0F4BDF98F60. S2CID 132399530.
↑ Sb(I) and Sb(II) have been observed in organoantimony compounds; for Sb(I), see Šimon, Petr; de Proft, Frank; Jambor, Roman; Růžička, Aleš; Dostál, Libor (2010). "Monomeric Organoantimony(I) and Organobismuth(I) Compounds Stabilized by an NCN Chelating Ligand: Syntheses and Structures". Angewandte Chemie International Edition. 49 (32): 5468–5471. doi:10.1002/anie.201002209. PMID 20602393.
↑ Sb(IV) has been observed in [SbCl₆]²⁻, see Nobuyoshi Shinohara; Masaaki Ohsima (2000). "Production of Sb(IV) Chloro Complex by Flash Photolysis of the Corresponding Sb(III) and Sb(V) Complexes in CH3CN and CHCl3". Bulletin of the Chemical Society of Japan. 73 (7): 1599–1604. doi:10.1246/bcsj.73.1599.
↑ Te(0) has been observed in tellurolates.
↑ Te(I) has been observed in tellurium iodide (TeI), see "Tellurium: tellurium iodide". WebElements.com. Retrieved 2015-02-23.
↑ Te(III) has been observed in [Te(N(SiMe₃)₂)₂]⁺, see Heinze, Thorsten; Roesky, Herbert W.; Pauer, Frank; Stalke, Dietmar; Sheldrick, George M. (1991). "Synthesis and Structure of the First Tellurium(III) Radical Cation". Angewandte Chemie International Edition. 30 (12): 1678. doi:10.1002/anie.199116771. Retrieved 2015-02-23.
↑ Te(V) is mentioned by Greenwood and Earnshaw, but they do not give any example of a Te(V) compound. What was long thought to be ditellurium decafluoride (Te₂F₁₀) is actually bis(pentafluorotelluryl) oxide, F₅TeOTeF₅: see Watkins, P. M. (1974). "Ditellurium decafluoride - A Continuing Myth". Journal of Chemical Education. 51 (9): 520–521. Bibcode:1974JChEd..51..520W. doi:10.1021/ed051p520. However, Te(V) has been observed in HTeO⁻, TeO⁻, HTeO−2, and TeO−3; see Kläning, Ulrik K.; Sehested, K. (2001). "Tellurium(V). A Pulse Radiolysis Study". The Journal of Physical Chemistry A. 105 (27): 6637–45. Bibcode:2001JPCA..105.6637K. doi:10.1021/jp010577i.
↑ Iodine(0) appears as I₂ in polymeric {Sb₂I₉^3--I₂}_x and {Bi₂I₉^3--I₂}_x polymeric complex anions: see Korobeynikov, Nikita A; Usoltsev, Andrey N; Abramov, Pavel A; Sokolov, Maxim N; Adonin, Sergey A (2 Dec 2022). "One-Dimensional Iodoantimonate(III) and Iodobismuthate(III) Supramolecular Hybrids with Diiodine: Structural Features, Stability and Optical Properties". Molecules. 27 (23): 8487. doi:10.3390/molecules27238487. PMC 9735928. PMID 36500578.
↑ I(II) is known to exist in monoxide (IO); see Nikitin, I V (31 August 2008). "Halogen monoxides". Russian Chemical Reviews. 77 (8): 739–749. Bibcode:2008RuCRv..77..739N. doi:10.1070/RC2008v077n08ABEH003788. S2CID 250898175.
↑ I(IV) has been observed in iodine dioxide (IO₂); see Pauling, Linus (1988). "Oxygen Compounds of Nonmetallic Elements". General Chemistry (3rd ed.). Dover Publications, Inc. p. 259. ISBN 978-0-486-65622-9.
↑ I(VI) has been observed in IO₃, IO₄²⁻, H₅IO₆⁻, H₂IO₅²⁻, H₄IO₆²⁻, and HIO₅³⁻; see Kläning, Ulrik K.; Sehested, Knud; Wolff, Thomas (1981). "Laser flash photolysis and pulse radiolysis of iodate and periodate in aqueous solution. Properties of iodine(VI)". J. Chem. Soc., Faraday Trans. 1. 77 (7): 1707–18. doi:10.1039/F19817701707.
↑ Xe compounds: see Xenon
↑ Xe(0) has been observed in tetraxenonogold(II) (AuXe₄²⁺).
↑ Xe(I) has been reported in xenon hexafluoroplatinate and xenon hexafluororhodate (see Pauling, Linus (1988). General Chemistry (3rd ed.). Dover Publications, Inc. p. 250. ISBN 978-0-486-65622-9.), however these compounds were later found to contain Xe(II).
↑ Ba(I) has been observed in barium monofluoride (BaF); see Colarusso, P.; Guo, B.; Zhang, K.-Q.; Bernath, P.F. (1995). "High-Resolution Fourier Transform Infrared Emission Spectrum of Barium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 170 (1): 59. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2005-03-10.
1 2 3 4 La(I), Pr(I), Tb(I), Tm(I), and Yb(I) have been observed in MB₈⁻ clusters; see Li, Wan-Lu; Chen, Teng-Teng; Chen, Wei-Jia; Li, Jun; Wang, Lai-Sheng (2021). "Monovalent lanthanide(I) in borozene complexes". Nature Communications. 12 (1): 6467. doi:10.1038/s41467-021-26785-9. PMC 8578558. PMID 34753931.
↑ Pr(I) has been observed in [PrB₄]⁻; see Chen, Xin; Chen, Teng-Teng; Li, Wang-Lu; Lu, Jun-Bo; Zhao, Li-Juan; Jian, Tian; Hu, Han-Shi; Wang, Lai-Sheng; Li, Jun (2018-12-13). "Lanthanides with Unusually Low Oxidation States in the PrB₃^– and PrB₄^– Boride Clusters". Inorganic Chemistry. 58 (1): 411–418. doi:10.1021/acs.inorgchem.8b02572. PMID 30543295. S2CID 56148031.
↑ Pr(V) has been observed in [PrO₂]⁺; see Zhang, Qingnan; Hu, Shu-Xian; Qu, Hui; Su, Jing; Wang, Guanjun; Lu, Jun-Bo; Chen, Mohua; Zhou, Mingfei; Li, Jun (2016-06-06). "Pentavalent Lanthanide Compounds: Formation and Characterization of Praseodymium(V) Oxides". Angewandte Chemie International Edition. 55 (24): 6896–6900. doi:10.1002/anie.201602196. ISSN 1521-3773. PMID 27100273.
↑ Hu, Shu-Xian; Jian, Jiwen; Su, Jing; Wu, Xuan; Li, Jun; Zhou, Mingfei (2017). "Pentavalent lanthanide nitride-oxides: NPrO and NPrO− complexes with N≡Pr triple bonds". Chemical Science. 8 (5): 4035–4043. doi:10.1039/C7SC00710H. ISSN 2041-6520. PMC 5434915. PMID 28580119.
↑ Nd(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5
1 2 3 4 5 All the lanthanides (La–Lu) in the +2 oxidation state have been observed (except La, Gd, Lu) in dilute, solid solutions of dihalides of these elements in alkaline earth dihalides (see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5) and (except Pm) in organometallic molecular complexes, see Lanthanides Topple Assumptions and Meyer, G. (2014). "All the Lanthanides Do It and Even Uranium Does Oxidation State +2". Angewandte Chemie International Edition. 53 (14): 3550–51. doi:10.1002/anie.201311325. PMID 24616202.. Additionally, all the lanthanides (La–Lu) form dihydrides (LnH₂), dicarbides (LnC₂), monosulfides (LnS), monoselenides (LnSe), and monotellurides (LnTe), but for most elements these compounds have Ln³⁺ ions with electrons delocalized into conduction bands, e. g. Ln³⁺(H⁻)₂(e⁻).
↑ SmB6- cluster anion has been reported and contains Sm in rare oxidation state of +1; see Paul, J. Robinson; Xinxing, Zhang; Tyrel, McQueen; Kit, H. Bowen; Anastassia, N. Alexandrova (2017). "SmB₆^– Cluster Anion: Covalency Involving f Orbitals". J. Phys. Chem. A 2017, 121, 8, 1849–1854. 121 (8): 1849–1854. doi:10.1021/acs.jpca.7b00247. PMID 28182423..
↑ Dy(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5
↑ Hf(I) has been observed in hafnium monobromide (HfBr), see Marek, G.S.; Troyanov, S.I.; Tsirel'nikov, V.I. (1979). "Кристаллическое строение и термодинамические характеристики монобромидов циркония и гафния / Crystal structure and thermodynamic characteristics of monobromides of zirconium and hafnium". Журнал неорганической химии / Russian Journal of Inorganic Chemistry (in Russian). 24 (4): 890–893.
↑ Re(–3) and Re(–1) occurs in Na₃[Re(CO)₄] and HRe(CO)₅ respectively; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1046. ISBN 978-0-08-037941-8.
↑ Os(−1) has been observed in Na[Os(CO)₁₃]; see Krause, J.; Siriwardane, Upali; Salupo, Terese A.; Wermer, Joseph R.; Knoeppel, David W.; Shore, Sheldon G. (1993). "Preparation of [Os₃(CO)₁₁]²⁻ and its reactions with Os₃(CO)₁₂; structures of [Et₄N] [HOs₃(CO)₁₁] and H₂OsS₄(CO)". Journal of Organometallic Chemistry. 454 (1–2): 263–271. doi:10.1016/0022-328X(93)83250-Y. and Carter, Willie J.; Kelland, John W.; Okrasinski, Stanley J.; Warner, Keith E.; Norton, Jack R. (1982). "Mononuclear hydrido alkyl carbonyl complexes of osmium and their polynuclear derivatives". Inorganic Chemistry. 21 (11): 3955–3960. doi:10.1021/ic00141a019.
↑ Ir(−3) has been observed in Ir(CO)₃³⁻; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1117. ISBN 978-0-08-037941-8.
↑ Ir(–2) has been observed in IrVO₂^–; see Le-Shi Chen; Yun-Zhu Liu; Jiao-Jiao Chen; Si-Dun Wang; Tong-Mei Ma; Xiao-Na Li; Sheng-Gui He (2022). "Water–Gas Shift Catalyzed by Iridium–Vanadium Oxide Clusters IrVO₂^– with Iridium in a Rare Oxidation State of −II". The Journal of Physical Chemistry A. 126 (32): 5294–5301. doi:10.1021/acs.jpca.2c03974.
↑ Ir(VII) has been observed in [(η²-O₂)IrO₂]⁺; see C&EN: Iridium dressed to the nines.
↑ Ir(VIII) has been observed in iridium tetroxide (IrO₄); see Gong, Yu; Zhou, Mingfei; Kaupp, Martin; Riedel, Sebastian (2009). "Formation and Characterization of the Iridium Tetroxide Molecule with Iridium in the Oxidation State +VIII". Angewandte Chemie International Edition. 48 (42): 7879–7883. doi:10.1002/anie.200902733. PMID 19593837.
↑ Ir(IX) has been observed in IrO+4; see Wang, Guanjun; Zhou, Mingfei; Goettel, James T.; Schrobilgen, Gary G.; Su, Jing; Li, Jun; Schlöder, Tobias; Riedel, Sebastian (21 August 2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786. S2CID 4463905.
↑ Pt(−1) and Pt(−2) have been observed in the barium platinides BaPt and Ba₂Pt, respectively: see Karpov, Andrey; Konuma, Mitsuharu; Jansen, Martin (2006). "An experimental proof for negative oxidation states of platinum: ESCA-measurements on barium platinides". Chemical Communications (8): 838–840. doi:10.1039/b514631c. PMID 16479284.
↑ Pt(I) and Pt(III) have been observed in bimetallic and polymetallic species; see Kauffman, George B.; Thurner, Joseph J.; Zatko, David A. (1967). "Ammonium Hexachloroplatinate(IV)". Inorganic Syntheses. Vol. 9. pp. 182–185. doi:10.1002/9780470132401.ch51. ISBN 978-0-470-13240-1.
↑ Au(0) has been observed, see Mézaille, Nicolas; Avarvari, Narcis; Maigrot, Nicole; Ricard, Louis; Mathey, François; Le Floch, Pascal; Cataldo, Laurent; Berclaz, Théo; Geoffroy, Michel (1999). "Gold(I) and Gold(0) Complexes of Phosphinine‐Based Macrocycles". Angewandte Chemie International Edition. 38 (21): 3194–3197. doi:10.1002/(SICI)1521-3773(19991102)38:21<3194::AID-ANIE3194>3.0.CO;2-O. PMID 10556900.
↑ Hg(IV) has been reported in mercury(IV) fluoride (HgF₄); see Xuefang Wang; Lester Andrews; Sebastian Riedel; Martin Kaupp (2007). "Mercury Is a Transition Metal: The First Experimental Evidence for HgF₄". Angew. Chem. Int. Ed. 46 (44): 8371–8375. doi:10.1002/anie.200703710. PMID 17899620. However, it could not be confirmed by later experiments; see Young, Nigel (2016-07-12). "Is mercury a transition metal?". University of Hull. Archived from the original on 2016-10-12.
↑ Tl(−5) has been observed in Na₂₃K₉Tl_15.3, see Dong, Z.-C.; Corbett, J. D. (1996). "Na₂₃K₉Tl_15.3: An Unusual Zintl Compound Containing Apparent Tl₅⁷⁻, Tl₄⁸⁻, Tl₃⁷⁻, and Tl⁵⁻ Anions". Inorganic Chemistry. 35 (11): 3107–12. doi:10.1021/ic960014z. PMID 11666505.
↑ Tl(−1) has been observed in caesium thallide (CsTl); see King, R. B.; Schleyer, R. (2004). "Theory and concepts in main-group cluster chemistry". In Driess, M.; Nöth, H. (eds.). Molecular clusters of the main group elements. Wiley-VCH, Chichester. p. 19. ISBN 978-3-527-61437-0.
↑ Tl(+2) has been observed in tetrakis(hypersilyl)dithallium ([(Me₃Si)Si]₂Tl—Tl[Si(SiMe₃)]₂), see Sonja Henkel; Dr. Karl Wilhelm Klinkhammer; Dr. Wolfgang Schwarz (1994). "Tetrakis(hypersilyl)dithallium(Tl—Tl): A Divalent Thallium Compound". Angew. Chem. Int. Ed. 33 (6): 681–683. doi:10.1002/anie.199406811.
↑ Pb(−2) has been observed in BaPb, see Ferro, Riccardo (2008). Nicholas C. Norman (ed.). Intermetallic Chemistry. Elsevier. p. 505. ISBN 978-0-08-044099-6. and Todorov, Iliya; Sevov, Slavi C. (2004). "Heavy-Metal Aromatic Rings: Cyclopentadienyl Anion Analogues Sn₅⁶⁻ and Pb₅⁶⁻ in the Zintl Phases Na₈BaPb₆, Na₈BaSn₆, and Na₈EuSn₆". Inorganic Chemistry. 43 (20): 6490–94. doi:10.1021/ic000333x.
↑ Pb(0) carbonyls have been observered in reaction between lead atoms and carbon monoxide; see Ling, Jiang; Qiang, Xu (2005). "Observation of the lead carbonyls Pb_nCO (n=1–4): Reactions of lead atoms and small clusters with carbon monoxide in solid argon". The Journal of Chemical Physics. 122 (3): 034505. 122 (3): 34505. Bibcode:2005JChPh.122c4505J. doi:10.1063/1.1834915. ISSN 0021-9606. PMID 15740207. Also, Pb(0) has been observed in [Si^II(Xant)Si^II]PbFe(CO)₄; see Jian Xu; Sudip Pan; Shenglai Yao; Gernot Frenking; Matthias Driess (2022). "The Heaviest Bottleable Metallylone: Synthesis of a Monatomic, Zero-Valent Lead Complex ("Plumbylone")". Angewandte Chemie International Edition. 61 (38): e202209442. doi:10.1002/anie.202209442. PMC 9545849. PMID 35848899.
↑ Pb(+1) and Pb(+3) have been observed in organolead compounds, e.g. hexamethyldiplumbane Pb₂(CH₃)₆; for Pb(I), see Siew-Peng Chia; Hong-Wei Xi; Yongxin Li; Kok Hwa Lim; Cheuk-Wai So (2013). "A Base-Stabilized Lead(I) Dimer and an Aromatic Plumbylidenide Anion". Angew. Chem. Int. Ed. 52 (24): 6298–6301. doi:10.1002/anie.201301954. PMID 23629949.
↑ Bi(−2) and Bi(−1) occur in Zintl phases, e.g. (Ca²⁺)₂₂[Bi₄]⁴⁻([Bi₂]⁴⁻)₄[Bi³⁻]₈; see Ponou, Siméon (2006). "Germanides, Germanide-Tungstate Double Salts and Substitution Effects in Zintl Phases". Technische Universität München. Lehrstuhl für Anorganische Chemie mit Schwerpunkt Neue Materialien. p. 68.
↑ Bi(0) state is known to exist in a N-heterocyclic carbene complex of dibismuthene; see Deka, Rajesh; Orthaber, Andreas (May 6, 2022). "Carbene chemistry of arsenic, antimony, and bismuth: origin, evolution and future prospects". Royal Society of Chemistry. 51 (22): 8540–8556. doi:10.1039/d2dt00755j. PMID 35578901. S2CID 248675805.
↑ Bi(I) has been observed in bismuth monobromide (BiBr) and bismuth monoiodide (BiI); see Godfrey, S. M.; McAuliffe, C. A.; Mackie, A. G.; Pritchard, R. G. (1998). Nicholas C. Norman (ed.). Chemistry of arsenic, antimony, and bismuth. Springer. pp. 67–84. ISBN 978-0-7514-0389-3.
↑ Bi(+2) has been observed in dibismuthines (R₂Bi—BiR₂), see Ashe, Arthur J. III (1990). "Thermochromic Distibines and Dibismuthines". Advances in Organometallic Chemistry. 30: 77–97. doi:10.1016/S0065-3055(08)60499-2. ISBN 9780120311309.
↑ Bi(IV) has been observed; see A. I. Aleksandrov, I. E. Makarov (1987). "Formation of Bi(II) and Bi(IV) in aqueous hydrochloric solutions of Bi(III)". Bulletin of the Academy of Sciences of the USSR, Division of Chemical Science. 36 (2): 217–220. doi:10.1007/BF00959349. S2CID 94865394.
↑ Po(V) has been observed in dioxidopolonium(1+) (PoO⁺); see Thayer, John S. (2010). "Relativistic Effects and the Chemistry of the Heavier Main Group Elements". Relativistic Methods for Chemists. Challenges and Advances in Computational Chemistry and Physics. Vol. 10. p. 78. doi:10.1007/978-1-4020-9975-5_2. ISBN 978-1-4020-9974-8.
↑ Rn(II) has been observed in radon difluoride (RnF₂); see Stein, L. (1970). "Ionic Radon Solution". Science. 168 (3929): 362–4. Bibcode:1970Sci...168..362S. doi:10.1126/science.168.3929.362. PMID 17809133. S2CID 31959268. and Kenneth S. Pitzer (1975). "Fluorides of radon and element 118". J. Chem. Soc., Chem. Commun. (18): 760b–761. doi:10.1039/C3975000760b.
↑ Rn(IV) is reported by Greenwood and Earnshaw, but is not known to exist; see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. Vol. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.
↑ Rn(VI) is known in radon trioxide (RnO₃); see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. Vol. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.
↑ Th(-I) and U(-I) have been detected in the gas phase as octacarbonyl anions; see Chaoxian, Chi; Sudip, Pan; Jiaye, Jin; Luyan, Meng; Mingbiao, Luo; Lili, Zhao; Mingfei, Zhou; Gernot, Frenking (2019). "Octacarbonyl Ion Complexes of Actinides [An(CO)₈]^+/− (An=Th, U) and the Role of f Orbitals in Metal–Ligand Bonding". Chemistry (Weinheim an der Bergstrasse, Germany). 25 (50): 11772–11784. 25 (50): 11772–11784. doi:10.1002/chem.201902625. ISSN 0947-6539. PMC 6772027. PMID 31276242.
↑ Th(I) is known in thorium(I) bromide (ThBr); see Wickleder, Mathias S.; Fourest, Blandine; Dorhout, Peter K. (2006). "Thorium". In Morss, Lester R.; Edelstein, Norman M.; Fuger, Jean (eds.). The Chemistry of the Actinide and Transactinide Elements (PDF). Vol. 3 (3rd ed.). Dordrecht, the Netherlands: Springer. pp. 52–160. doi:10.1007/1-4020-3598-5_3. ISBN 978-1-4020-3555-5. Archived from the original (PDF) on 2016-03-07.
↑ Th(II) and Th(III) are observed in [Th^II{η⁵-C₅H₃(SiMe₃)₂}₃]⁻ and [Th^III{η⁵-C₅H₃(SiMe₃)₂}₃], see Langeslay, Ryan R.; Fieser, Megan E.; Ziller, Joseph W.; Furche, Philip; Evans, William J. (2015). "Synthesis, structure, and reactivity of crystalline molecular complexes of the {[C₅H₃(SiMe₃)₂]₃Th}¹⁻ anion containing thorium in the formal +2 oxidation state". Chem. Sci. 6 (1): 517–521. doi:10.1039/C4SC03033H. PMC 5811171. PMID 29560172.
↑ Pa(II) occurs in proctactinium(II) oxide
↑ Th(-I) and U(-I) have been detected in the gas phase as octacarbonyl anions; see Chaoxian, Chi; Sudip, Pan; Jiaye, Jin; Luyan, Meng; Mingbiao, Luo; Lili, Zhao; Mingfei, Zhou; Gernot, Frenking (2019). "Octacarbonyl Ion Complexes of Actinides [An(CO)₈]^+/− (An=Th, U) and the Role of f Orbitals in Metal–Ligand Bonding". Chemistry (Weinheim an der Bergstrasse, Germany). 25 (50): 11772–11784. 25 (50): 11772–11784. doi:10.1002/chem.201902625. ISSN 0947-6539. PMC 6772027. PMID 31276242.
↑ U(I) has been observed in uranium monofluoride (UF) and uranium monochloride (UCl), see Sykes, A. G. (1990). "Compounds of Thorium and Uranium". Advances in Inorganic Chemistry. Vol. 34. Academic Press. pp. 87–88. ISBN 978-0-12-023634-3. Retrieved 22 March 2015. Also, U(I) has been observed in [U(η⁵-C₅ⁱPr₅)₂]⁻, see Barluzzi, Luciano; Giblin, Sean R.; Mansikkamäki, Akseli; Layfield, Richard A. (2022). "Identification of Oxidation State +1 in a Molecular Uranium Complex". J. Am. Chem. Soc. 144 (40): 18229–18233. doi:10.1021/jacs.2c06519. PMID 36169550. S2CID 252567088. Retrieved 13 July 2023.
↑ U(II) has been observed in [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U], see MacDonald, Matthew R.; Fieser, Megan E.; Bates, Jefferson E.; Ziller, Joseph W.; Furche, Filipp; Evans, William J. (2013). "Identification of the +2 Oxidation State for Uranium in a Crystalline Molecular Complex, [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U]". J. Am. Chem. Soc. 135 (36): 13310–13313. doi:10.1021/ja406791t. PMID 23984753.
↑ Np(II), (III) and (IV) have been observed, see Dutkiewicz, Michał S.; Apostolidis, Christos; Walter, Olaf; Arnold, Polly L (2017). "Reduction chemistry of neptunium cyclopentadienide complexes: from structure to understanding". Chem. Sci. 8 (4): 2553–2561. doi:10.1039/C7SC00034K. PMC 5431675. PMID 28553487.
↑ Pu(II) has been observed in {Pu[C₅H₃(SiMe₃)₂]₃}−; see Windorff, Cory J.; Chen, Guo P; Cross, Justin N; Evans, William J.; Furche, Filipp; Gaunt, Andrew J.; Janicke, Michael T.; Kozimor, Stosh A.; Scott, Brian L. (2017). "Identification of the Formal +2 Oxidation State of Plutonium: Synthesis and Characterization ofref name="curium5" {Pu^II[C₅H₃(SiMe₃)₂]₃}−". J. Am. Chem. Soc. 139 (11): 3970–3973. doi:10.1021/jacs.7b00706. PMID 28235179.
↑ Pu(VIII) has been observed in PuO₄; see Nikonov, M. V.; Kiselev, Yu. M.; Tananaev, I. G.; Myasoedov, B. F. (March 2011). "Plutonium volatility in ozonization of alkaline solutions of Pu(VI) hydroxo complexes". Doklady Chemistry. 437 (1): 69–71. doi:10.1134/S0012500811030104. S2CID 95951175. Also see Kiselev, Yu. M.; Nikonov, M. V.; Dolzhenko, V. D.; Ermilov, A. Yu.; Tananaev, I. G.; Myasoedov, B. F. (17 January 2014). "On existence and properties of plutonium(VIII) derivatives". Radiochimica Acta. 102 (3): 227–237. doi:10.1515/ract-2014-2146. S2CID 100915090.
↑ Am(VII) has been observed in AmO−5; see Americium, Das Periodensystem der Elemente für den Schulgebrauch (The periodic table of elements for schools) chemie-master.de (in German), Retrieved 28 November 2010 and Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1265. ISBN 978-0-08-037941-8.
1 2 3 Cm(V), Bk(V), and Cf(V) have been observed in BkO₂⁺, CfO₂⁺, CmO₂(NO₃)₂⁻, BkO₂(NO₃)₂⁻, and CfO₂(NO₃)₂⁻; see Dau, Phuong Diem; Vasiliu, Monica; Peterson, Kirk A; Dixon, David A; Gibsoon, John K (October 2017). "Remarkably High Stability of Late Actinide Dioxide Cations: Extending Chemistry to Pentavalent Berkelium and Californium". Chemistry - A European Journal. 23 (68): 17369–17378. doi:10.1002/chem.201704193. PMID 29024093.
1 2 3 Kovács, Attila; Dau, Phuong D.; Marçalo, Joaquim; Gibson, John K. (2018). "Pentavalent Curium, Berkelium, and Californium in Nitrate Complexes: Extending Actinide Chemistry and Oxidation States". Inorg. Chem. American Chemical Society. 57 (15): 9453–9467. doi:10.1021/acs.inorgchem.8b01450. OSTI 1631597. PMID 30040397. S2CID 51717837.
↑ Cm(VI) has been observed in curium trioxide (CmO₃) and dioxidocurium(2+) (CmO+2); see Domanov, V. P.; Lobanov, Yu. V. (October 2011). "Formation of volatile curium(VI) trioxide CmO₃". Radiochemistry. 53 (5): 453–6. doi:10.1134/S1066362211050018. S2CID 98052484.
↑ Cm(VIII) has been reported to possibly occur in curium tetroxide (CmO₄); see Domanov, V. P. (January 2013). "Possibility of generation of octavalent curium in the gas phase in the form of volatile tetraoxide CmO₄". Radiochemistry. 55 (1): 46–51. doi:10.1134/S1066362213010098. S2CID 98076989. However, new experiments seem to indicate its nonexistence: Zaitsevskii, Andréi; Schwarz, W H Eugen (April 2014). "Structures and stability of AnO4 isomers, An = Pu, Am, and Cm: a relativistic density functional study". Physical Chemistry Chemical Physics. 2014 (16): 8997–9001. Bibcode:2014PCCP...16.8997Z. doi:10.1039/c4cp00235k. PMID 24695756.
↑ Peterson, J. R.; Hobart, D. E. (1984). "The Chemistry of Berkelium". In Emeléus, Harry Julius (ed.). Advances in inorganic chemistry and radiochemistry. Vol. 28. Academic Press. pp. 29–64. doi:10.1016/S0898-8838(08)60204-4. ISBN 978-0-12-023628-2.
↑ Peterson & Hobart 1984, p. 55.
↑ Sullivan, Jim C.; Schmidt, K. H.; Morss, L. R.; Pippin, C. G.; Williams, C. (1988). "Pulse radiolysis studies of berkelium(III): preparation and identification of berkelium(II) in aqueous perchlorate media". Inorganic Chemistry. 27 (4): 597. doi:10.1021/ic00277a005.
↑ Es(IV) is known in einsteinium(IV) fluoride (EsF₄); see Kleinschmidt, P. (1994). "Thermochemistry of the actinides". Journal of Alloys and Compounds. 213–214: 169–172. doi:10.1016/0925-8388(94)90898-2.
↑ Db(V) has been observed in dubnium pentachloride (DbCl₅); see H. W. Gäggeler (2007). "Gas Phase Chemistry of Superheavy Elements" (PDF). Paul Scherrer Institute. pp. 26–28. Archived from the original (PDF) on 2012-02-20.
↑ Sg(VI) has been observed in seaborgium oxide hydroxide (SgO₂(OH)₂); see Huebener, S.; Taut, S.; Vahle, A.; Dressler, R.; et al. (2001). "Physico-chemical characterization of seaborgium as oxide hydroxide" (PDF). Radiochim. Acta. 89 (11–12): 737–741. doi:10.1524/ract.2001.89.11-12.737. S2CID 98583998. Archived from the original (PDF) on 2014-10-25.
↑ Sg(0) has been observed in seaborgium hexacarbonyl (Sg(CO)₆); see Even, J.; Yakushev, A.; Dullmann, C. E.; Haba, H.; et al. (2014). "Synthesis and detection of a seaborgium carbonyl complex". Science. 345 (6203): 1491–3. Bibcode:2014Sci...345.1491E. doi:10.1126/science.1255720. PMID 25237098. S2CID 206558746.
↑ Bh(VII) has been observed in bohrium oxychloride (BhO₃Cl); see Eichler R, Düllmann C, Gäggeler HW, Eichler B, et al. "Gas chemical investigation of bohrium (Bh, element 107)" (PDF). GSI Annual Report 2000. Archived from the original (PDF) on 2008-02-28. Retrieved 2008-02-29.
↑ Hs(VIII) has been observed in hassium tetroxide (HsO₄); see "Chemistry of Hassium" (PDF). Gesellschaft für Schwerionenforschung mbH. 2002. Retrieved 2007-01-31.
↑ Cn(II) has been observed in copernicium selenide (CnSe); see "Annual Report 2015: Laboratory of Radiochemistry and Environmental Chemistry" (PDF). Paul Scherrer Institute. 2015. p. 3.
↑ Langmuir, Irving (1919). "The arrangement of electrons in atoms and molecules". J. Am. Chem. Soc. 41 (6): 868–934. doi:10.1021/ja02227a002. Archived from the original on 2019-06-21. Retrieved 2019-07-01.
↑ "Antoine Laurent Lavoisier The Chemical Revolution – Landmark – American Chemical Society". American Chemical Society. Archived from the original on 5 January 2021. Retrieved 14 July 2018.
↑ "Lavoisier on Elements". Chem125-oyc.webspace.yale.edu. Archived from the original on 13 June 2020. Retrieved 14 July 2018.
↑ Wöhler, F. (1835). Grundriss der Chemie: Unorganische Chemie [Foundations of Chemistry: Inorganic Chemistry]. Berlin: Duncker und Humblot. p. 4.
↑ Jensen, W. B. (2007). "the origin of the oxidation-state concept". J. Chem. Educ. 84 (9): 1418–1419. Bibcode:2007JChEd..84.1418J. doi:10.1021/ed084p1418.
↑ Stock, A. (1919). "Einige Nomenklaturfragen der anorganischen Chemie" [Some nomenclature issues of inorganic chemistry]. Angew. Chem. 32 (98): 373–374. Bibcode:1919AngCh..32..373S. doi:10.1002/ange.19190329802. Archived from the original on 2020-08-06. Retrieved 2019-07-01.
1 2 Jorissen, W. P.; Bassett, H.; Damiens, A.; Fichter, F.; Rémy, H. (1941). "Rules for naming inorganic compounds". J. Am. Chem. Soc. 63: 889–897. doi:10.1021/ja01849a001.
↑ Latimer, W. M. (1938). The Oxidation States of the Elements and their Potentials in Aqueous Solutions (1st ed.). Prentice-Hall.
↑ Bray, W. C.; Branch, G. E. K. (1913). "Valence and tautomerism". J. Am. Chem. Soc. 35 (10): 1440–1447. doi:10.1021/ja02199a003. Archived from the original on 2021-02-09. Retrieved 2019-09-16.
↑ Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, I. The oxidation and reduction reactions". J. Am. Chem. Soc. 57 (7): 1221–1229. doi:10.1021/ja01310a018.
↑ Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, II. The oxidation state of argentic salts". J. Am. Chem. Soc. 57 (7): 1229–1237. doi:10.1021/ja01310a019.
↑ Fernelius, W. C. (1948). "Some problems of inorganic nomenclature". Chem. Eng. News. 26: 161–163. doi:10.1021/cen-v026n003.p161.
↑ Fernelius, W. C.; Larsen, E. M.; Marchi, L. E.; Rollinson, C. L. (1948). "Nomenclature of coördination compounds". Chem. Eng. News. 26 (8): 520–523. doi:10.1021/cen-v026n008.p520.
↑ Pauling, L. (1948). "The modern theory of valency". J. Chem. Soc. 1948: 1461–1467. doi:10.1039/JR9480001461. PMID 18893624. Archived from the original on 2021-12-07. Retrieved 2021-11-22.
↑ Calvert, J. G. (1990). "IUPAC Recommendation 1990". Pure Appl. Chem. 62: 2204. doi:10.1351/pac199062112167.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Wang, G.; Zhou, M.; Goettel, G. T.; Schrobilgen, G. J.; Su, J.; Li, J.; Schlöder, T.; Riedel, S. (2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786. S2CID 4463905.

[2] Yu, Haoyu S.; Truhlar, Donald G. (2016). "Oxidation State 10 Exists". Angewandte Chemie International Edition. 55 (31): 9004–9006. doi:10.1002/anie.201604670. PMID 27273799.

[3] Schroeder, Melanie, Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden (in German), p. 139, archived from the original on 2020-08-06, retrieved 2020-02-24

[10.1515/pac-2015-1204-4] 1 2 3 4 Karen, P.; McArdle, P.; Takats, J. (2016). "Comprehensive definition of oxidation state (IUPAC Recommendations 2016)". Pure Appl. Chem. 88 (8): 831–839. doi:10.1515/pac-2015-1204. hdl:10852/59520. S2CID 99403810.

[10.1515/pac-2013-0505-5] 1 2 3 4 5 6 7 8 Karen, P.; McArdle, P.; Takats, J. (2014). "Toward a comprehensive definition of oxidation state (IUPAC Technical Report)". Pure Appl. Chem. 86 (6): 1017–1081. doi:10.1515/pac-2013-0505.

[goldbookoxstate-6] 1 2 3 IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation state". doi:10.1351/goldbook.O04365

[goldbookoxnumber-7] 1 2 IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation number". doi:10.1351/goldbook.O04363

[doi.org-8] 1 2 3 Karen, Pavel (2015). "Oxidation State, A Long-Standing Issue!". Angewandte Chemie International Edition. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.

[9] Hooydonk, G. (1974). O n an Ionic Approximation to Chemical Bonding, Zeitschrift für Naturforschung A, 29(5), 763-767. doi: https://doi.org/10.1515/zna-1974-0517 Archived 2018-06-12 at the Wayback Machine

[10] "Oxidation state". IUPAC Compendium of Chemical Terminology. 2009. doi:10.1351/goldbook.O04365. ISBN 978-0-9678550-9-7.

[11] Pure and Applied Chemistry (2014), 86(6), 1017–1081 CODEN: PACHAS; ISSN 0033-4545. English.

[12] Muir, K. W.; Ibers, J. A. (1969). "The structure of chlorocarbonyl(sulfur dioxide)bis(triphenylphosphine)rhodium, (RhCl(CO)(SO2)(P(C6H5)3 2)". Inorg. Chem. 8 (9): 1921–1928. doi:10.1021/ic50079a024.

[13] Jørgensen, C. K. (1966). "Electric Polarizability, Innocent Ligands and Spectroscopic Oxidation States". Structure and Bonding. Vol. 1. Berlin: Springer-Verlag. pp. 234–248.

[14] "The Two-Electron Bond". Chemistry LibreTexts. June 25, 2016. Archived from the original on February 9, 2021. Retrieved September 1, 2020.

[15] Karen, P. (2015). "Oxidation state, a long-standing issue!". Angew. Chem. Int. Ed. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.

[16] Martinie, R. J.; Bultema, J. J.; Wal, M. N. V.; Burkhart, B. J.; Griend, D. A. V.; DeCock, R. L. (2011). "Bond order and chemical properties of BF, CO, and N₂". J. Chem. Educ. 88 (8): 1094–1097. Bibcode:2011JChEd..88.1094M. doi:10.1021/ed100758t.

[Petrucci-17] 1 2 Petrucci, R. H.; Harwood, W. S.; Herring, F. G. (2002). General Chemistry (8th ed.). Prentice-Hall. ISBN 978-0-13-033445-9.

[18] Senn, M. S.; Wright, J. P.; Attfield, J. P. (2012). "Charge order and three-site distortions in the Verwey structure of magnetite" (PDF). Nature. 481 (7380): 173–6. Bibcode:2012Natur.481..173S. doi:10.1038/nature10704. hdl:20.500.11820/1b3bb558-52d5-419f-9944-ab917dc95f5e. PMID 22190035. S2CID 4425300. Archived (PDF) from the original on 2022-10-09.

[19] Whitten, K. W.; Galley, K. D.; Davis, R. E. (1992). General Chemistry (4th ed.). Saunders. p. 147. ISBN 978-0-03-075156-1.

[RedBook2005-20] 1 2 3 Connelly, N. G.; Damhus, T.; Hartshorn, R. M.; Hutton, A. T. Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005) (PDF). RSC Publishing. Archived (PDF) from the original on 2022-10-09.

[G&E-21] Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 27–28. ISBN 978-0-08-037941-8.

[22] H(0) is found in dihydrogen complexes.

[23] Disodium helide, (Na⁺)₂He(e^-)₂, has been synthesized at high pressure, see Dong, Xiao; Oganov, Artem R.; Goncharov, Alexander F.; Stavrou, Elissaios; Lobanov, Sergey; Saleh, Gabriele; Qian, Guang-Rui; Zhu, Qiang; Gatti, Carlo; Deringer, Volker L.; Dronskowski, Richard; Zhou, Xiang-Feng; Prakapenka, Vitali B.; Konôpková, Zuzana; Popov, Ivan A.; Boldyrev, Alexander I.; Wang, Hui-Tian (6 February 2017). "A stable compound of helium and sodium at high pressure". Nature Chemistry. 9 (5): 440–445. arXiv:1309.3827. Bibcode:2017NatCh...9..440D. doi:10.1038/nchem.2716. PMID 28430195. S2CID 20459726.

[G&E_Lithides-24] 1 2 3 4 5 Na(−1), K(−1), Rb(−1), and Cs(−1) are known in alkalides; the table by Greenwood and Earnshaw shows −1 only for Na and also erroneously for Li; no lithides are described.

[25] Li(0) atoms have been observed in various small lithium-chloride clusters; see Milovanović, Milan; Veličković, Suzana; Veljkovićb, Filip; Jerosimić, Stanka (October 30, 2017). "Structure and stability of small lithium-chloride Li_nCl_m^(0,1+) (n ≥ m, n = 1–6, m = 1–3) clusters". Physical Chemistry Chemical Physics. 19 (45): 30481–30497. doi:10.1039/C7CP04181K. PMID 29114648.

[ZeroValentBeryllium-26] Be(0) has been observed; see "Beryllium(0) Complex Found". Chemistry Europe. 13 June 2016.

[27] Be(I) has been observed in beryllium monohydride (BeH); see Shayesteh, A.; Tereszchuk, K.; Bernath, P. F.; Colin, R. (2003). "Infrared Emission Spectra of BeH and BeD" (PDF). J. Chem. Phys. 118 (3): 1158. Bibcode:2003JChPh.118.1158S. doi:10.1063/1.1528606. Archived from the original (PDF) on 2007-12-02. Retrieved 2007-12-10. and in [(CAAC)₂Be]^+• [CAAC = cyclic (alkyl)(amino)carbene], see Wang, Guocang; Walley, Jacob E.; Dickie, Diane E.; Pan, Sudip; Frenking, Gernot; Gilliard Jr., Robert G. (2020). "A Stable, Crystalline Beryllium Radical Cation". J. Am. Chem. Soc. 142 (10): 4560–4. doi:10.1021/jacs.9b13777. PMID 32088963. S2CID 211262005. Retrieved 2020-11-17.

[28] B(−5) has been observed in Al₃BC, see Schroeder, Melanie. "Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden" (in German). p. 139.

[29] B(−1) has been observed in magnesium diboride (MgB₂), see Keeler, James; Wothers, Peter (2014). Chemical Structure and Reactivity: An Integrated Approach. Oxford University Press. ISBN 9780199604135.

[30] B(0) has been observed in diborynes, see Braunschweig, H.; Dewhurst, R. D.; Hammond, K.; Mies, J.; Radacki, K.; Vargas, A. (2012). "Ambient-Temperature Isolation of a Compound with a Boron-Boron Triple Bond". Science. 336 (6087): 1420–1422. Bibcode:2012Sci...336.1420B. doi:10.1126/science.1221138. PMID 22700924. S2CID 206540959.

[31] Tetrazoles contain a pair of double-bonded nitrogen atoms with oxidation state 0 in the ring. A Synthesis of the parent 1H-tetrazole, CH₂N₄ (two atoms N(0)) is given in Henry, Ronald A.; Finnegan, William G. (1954). "An Improved Procedure for the Deamination of 5-Aminotetrazole". J. Am. Chem. Soc. 76 (1): 290–291. doi:10.1021/ja01630a086.

[32] Gold heptafluoride is calculated to be the pentafluoride with a molecular F₂ ligand. Himmel, Daniel; Riedel, Sebastian (2007). "After 20 Years, Theoretical Evidence That 'AuF₇' Is Actually AuF₅•F₂". Inorganic Chemistry. 46 (13): 5338–5342. doi:10.1021/ic700431s. PMID 17511450.

[33] A cluster of elusive SF₆⁺ with helium atoms is known to have fluorine(0) atom as a ligand; see Albertini, Simon; Bergmeister, Stefan; Laimer, Felix; Martini, Paul; Gruber, Elisabeth; Zappa, Fabio; Ončák, Milan; Scheier, Paul; Echt, Olof (2021-04-22). "SF 6 + : Stabilizing Transient Ions in Helium Nanodroplets". The Journal of Physical Chemistry Letters. 12 (17): 4112–4117. doi:10.1021/acs.jpclett.1c01024. ISSN 1948-7185. PMC 8154854. PMID 33886323.

[34] Ne(0) has been observed in Cr(CO)₅Ne. Perutz, Robin N.; Turner, James J. (August 1975). "Photochemistry of the Group 6 hexacarbonyls in low-temperature matrices. III. Interaction of the pentacarbonyls with noble gases and other matrices". Journal of the American Chemical Society. 97 (17): 4791–4800. doi:10.1021/ja00850a001.

[35] The compound NaCl has been shown in experiments to exists in several unusual stoichiometries under high pressure, including Na₃Cl in which contains a layer of sodium(0) atoms; see Zhang, W.; Oganov, A. R.; Goncharov, A. F.; Zhu, Q.; Boulfelfel, S. E.; Lyakhov, A. O.; Stavrou, E.; Somayazulu, M.; Prakapenka, V. B.; Konôpková, Z. (2013). "Unexpected Stable Stoichiometries of Sodium Chlorides". Science. 342 (6165): 1502–1505. arXiv:1310.7674. Bibcode:2013Sci...342.1502Z. doi:10.1126/science.1244989. PMID 24357316. S2CID 15298372.

[36] Low valent magnesium compounds with Mg(I) have been obtained using bulky ligands; see Green, S. P.; Jones C.; Stasch A. (December 2007). "Stable Magnesium(I) Compounds with Mg-Mg Bonds". Science. 318 (5857): 1754–1757. Bibcode:2007Sci...318.1754G. doi:10.1126/science.1150856. PMID 17991827. S2CID 40657565.

[37] Mg(0) has been synthesized in a compound containing a Na₂Mg₂²⁺ cluster coordinated to a bulky organic ligand; see Rösch, B.; Gentner, T. X.; Eyselein, J.; Langer, J.; Elsen, H.; Li, W.; Harder, S. (2021). "Strongly reducing magnesium(0) complexes". Nature. 592 (7856): 717–721. Bibcode:2021Natur.592..717R. doi:10.1038/s41586-021-03401-w. PMID 33911274. S2CID 233447380

[38] Al(II) has been observed in aluminium(II) oxide (AlO); see Tyte, D.C. (1964). "Red (B2Π–A2σ) Band System of Aluminium Monoxide". Nature. 202 (4930): 383–384. Bibcode:1964Natur.202..383T. doi:10.1038/202383a0. S2CID 4163250, and in dialanes (R₂Al—AlR₂); see Uhl, Werner (2004). "Organoelement Compounds Possessing Al—Al, Ga—Ga, In—In, and Tl—Tl Single Bonds". Advances in Organometallic Chemistry. 51: 53–108. doi:10.1016/S0065-3055(03)51002-4.

[Zintl-39] 1 2 3 4 5 6 7 8 9 Negative oxidation states of p-block metals (Al, Ga, In, Sn, Tl, Pb, Bi, Po) and metalloids (Si, Ge, As, Sb, Te, At) may occur in Zintl phases, see: Riedel, Erwin, ed. (2007). Moderne Anorganische Chemie (in German). p. 259, and "Vorlesung Intermetallische Phasen § 6.2 Binäre Zintl-Phasen" (in German).

[40] Unstable carbonyl of Al(0) has been detected in reaction of Al₂(CH₃)₆ with carbon monoxide; see Sanchez, Ramiro; Arrington, Caleb; Arrington Jr., C. A. (December 1, 1989). "Reaction of trimethylaluminum with carbon monoxide in low-temperature matrixes". American Chemical Society. 111 (25): 9110-9111. doi:10.1021/ja00207a023. OSTI 6973516.

[41] Al(−2) has been observed in Sr₁₄[Al₄]₂[Ge]₃, see Wemdorff, Marco; Röhr, Caroline (2007). "Sr₁₄[Al₄]₂[Ge]₃: Eine Zintl-Phase mit isolierten [Ge]^4–- und [Al₄]^8–-Anionen / Sr₁₄[Al₄]₂[Ge]₃: A Zintl Phase with Isolated [Ge]^4–- and [Al₄]^8– Anions". Zeitschrift für Naturforschung B (in German). 62 (10): 1227. doi:10.1515/znb-2007-1001. S2CID 94972243.

[ZeroValentTin-42] 1 2 3 "New Type of Zero-Valent Tin Compound". Chemistry Europe. 27 August 2016.

[43] P(0) has been observed, see Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; King, R. Bruce; Schaefer, Iii; Schleyer, Paul v. R.; Robinson, Gregory H. (2008). "Carbene-Stabilized Diphosphorus". Journal of the American Chemical Society. 130 (45): 14970–1. doi:10.1021/ja807828t. PMID 18937460.

[44] Chlorine(0) is present as dichlorine in {SnCl₆^2--Cl₂}_x and {PbCl₆^2--Cl₂}_x polymeric anion complexes see Usoltsev, Andrey N.; Korobeynikov, Nikita A.; Kolesov, Boris A.; Novikov, Alexander S.; Samsonenko, Denis G.; Fedin, Vladimir P.; Sokolov, Maxim N.; Adonin, Sergey A. (February 24, 2021). "Rule, Not Exclusion: Formation of Dichlorine-Containing Supramolecular Complexes with Chlorometalates(IV)". Inorg. Chem. 60 (6): 4171–4177. doi:10.1021/acs.inorgchem.1c00436. PMID 33626273. S2CID 232047538.

[45] The equilibrium Cl₂O₆⇌2ClO₃ is mentioned by Greenwood and Earnshaw, but it has been refuted, see Lopez, Maria; Juan E. Sicre (1990). "Physicochemical properties of chlorine oxides. 1. Composition, ultraviolet spectrum, and kinetics of the thermolysis of gaseous dichlorine hexoxide". J. Phys. Chem. 94 (9): 3860–3863. doi:10.1021/j100372a094., and Cl₂O₆ is actually chlorine(V,VII) oxide. However, ClO₃ has been observed, see Grothe, Hinrich; Willner, Helge (1994). "Chlorine Trioxide: Spectroscopic Properties, Molecular Structure, and Photochemical Behavior". Angew. Chem. Int. Ed. 33 (14): 1482–1484. doi:10.1002/anie.199414821.

[46] Ar(0) has been observed in argon fluorohydride (HArF) and ArCF₂²⁺, see Lockyear, J.F.; Douglas, K.; Price, S.D.; Karwowska, M.; et al. (2010). "Generation of the ArCF₂²⁺ Dication". Journal of Physical Chemistry Letters. 1: 358. doi:10.1021/jz900274p.

[47] Ca(I) has been observed; see Krieck, Sven; Görls, Helmar; Westerhausen, Matthias (2010). "Mechanistic Elucidation of the Formation of the Inverse Ca(I) Sandwich Complex [(thf)₃Ca(μ-C₆H₃-1,3,5-Ph₃)Ca(thf)₃] and Stability of Aryl-Substituted Phenylcalcium Complexes". Journal of the American Chemical Society. 132 (35): 12492–501. doi:10.1021/ja105534w. PMID 20718434.

[Ca0-48] 1 2 3 Octacarbonyl complexes isolated of Ca, Sr, Ba have been observed in a neon matrix, but it remains unclear whether these are metal(0) complexes because calculations disagree whether the metal is covalently or ionically bonded to the ligands; see Wu, X.; Zhao, L.; Jin, J.; Pan, S.; Li, W.; Jin, X.; Wang, G.; Zhou, M.; Frenking, G. (2018). "Observation of alkaline earth complexes M(CO)8 (M = Ca, Sr, or Ba) that mimic transition metals". Science. 361 (6405): 912–916. Bibcode:2018Sci...361..912W. doi:10.1126/science.aau0839. PMID 30166489. S2CID 52131470

[49] Sc(0) has been observed; see F. Geoffrey N. Cloke; Karl Khan & Robin N. Perutz (1991). "η-Arene complexes of scandium(0) and scandium(II)". J. Chem. Soc., Chem. Commun. (19): 1372–1373. doi:10.1039/C39910001372.

[50] Sc(I) has been observed; see Polly L. Arnold; F. Geoffrey; N. Cloke; Peter B. Hitchcock & John F. Nixon (1996). "The First Example of a Formal Scandium(I) Complex: Synthesis and Molecular Structure of a 22-Electron Scandium Triple Decker Incorporating the Novel 1,3,5-Triphosphabenzene Ring". J. Am. Chem. Soc. 118 (32): 7630–7631. doi:10.1021/ja961253o.

[51] Sc(II) has been observed; see Woen, David H.; Chen, Guo P.; Ziller, Joseph W.; Boyle, Timothy J.; Furche, Filipp; Evans, William J. (January 2017). "Solution Synthesis, Structure, and CO Reduction Reactivity of a Scandium(II) Complex". Angewandte Chemie International Edition. 56 (8): 2050–2053. doi:10.1002/anie.201611758. PMID 28097771.

[52] Ti(I) has been observed in [Ti(η⁶-1,3,5-C₆H₃ⁱPr₃)2][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂); see Calderazzo, Fausto; Ferri, Isabella; Pampaloni, Guido; Englert, Ulli; Green, Malcolm L. H. (1997). "Synthesis of [Ti(η⁶-1,3,5-C₆H₃iPr₃)₂][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂), the First Titanium(I) Derivatives". Organometallics. 16 (14): 3100–3101. doi:10.1021/om970155o.

[Carbonyls-53] 1 2 3 4 5 6 7 8 9 10 11 12 Ti(−2), V(−3), Cr(−4), Co(−3), Zr(−2), Nb(−3), Mo(−4), Ru(−2), Rh(−3), Hf(−2), Ta(−3), and W(−4) occur in anionic binary metal carbonyls; see Christian Bach (January 1999). Carbonylkomplexe der Platinmetalle [Carbonyl complexes of the platinum metals] (Doctor of Science) (in German). p. 4.; Werner, Helmut (2008). Landmarks in Organo-Transition Metal Chemistry: A Personal View. Springer Science & Business Media. pp. 97–100. ISBN 978-0-387-09848-7.; Haiduc, Ionel; Zuckerman, Jerry J. (2011). Basic Organometallic Chemistry: Containing Comprehensive Bibliography. Walter de Gruyter. p. 239. ISBN 978-0-89925-006-9.

[54] Ti(−1) has been reported in [Ti(bipy)₃]⁻, but was later shown to be Ti(+3); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–2256. doi:10.1021/ic302799s. PMID 23387926. However, Ti(−1) occurs in [Ti(η-C₆H₆]⁻ and [Ti(η-C₆H₅CH₃)]⁻, see Bandy, J. A.; Berry, A.; Green, M. L. H.; Perutz, R. N.; Prout, K.; Verpeautz, J.-N. (1984). "Synthesis of anionic sandwich compounds: [Ti(η-C₆H₅R)₂]^– and the crystal structure of [K(18-crown-6)(µ-H)Mo(η-C₅H₅)₂]". Inorganic Chemistry. 52 (4): 729–731. doi:10.1039/C39840000729.

[55] Jilek, Robert E.; Tripepi, Giovanna; Urnezius, Eugenijus; Brennessel, William W.; Young, Victor G. Jr.; Ellis, John E. (2007). "Zerovalent titanium–sulfur complexes. Novel dithiocarbamato derivatives of Ti(CO)₆: [Ti(CO)₄(S₂CNR₂)]⁻". Chem. Commun. (25): 2639–2641. doi:10.1039/B700808B. PMID 17579764.

[56] Mn(–3) and Mn(–1) occurs in Mn(NO)₃(CO) and HMn(CO)₅ respectively; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1046. ISBN 978-0-08-037941-8.

[57] Mn(–2) has been described erroneously by Greenwood as [MnPc]^2–; for a correct explanation, see Gcineka Mbambisa; Prudence Tau; Edith Antunes; Tebello Nyokong (2007). "Synthesis and electrochemical properties of purple manganese(III) and red titanium(IV) phthalocyanine complexes octa-substituted at non-peripheral positions with pentylthio groups". Polyhedron. 26 (18): 5355–5364. doi:10.1016/j.poly.2007.08.007.

[58] Fe(VII) has been observed in [FeO₄]⁻; see Lu, Jun-Bo; Jian, Jiwen; Huang, Wei; Lin, Hailu; Zhou, Mingfei (2016). "Experimental and theoretical identification of the Fe(VII) oxidation state in FeO₄⁻". Physical Chemistry Chemical Physics. 18 (45): 31125–31131. Bibcode:2016PCCP...1831125L. doi:10.1039/C6CP06753K. PMID 27812577.

[59] Fe(VIII) has been reported; see Yurii D. Perfiliev; Virender K. Sharma (2008). "Higher Oxidation States of Iron in Solid State: Synthesis and Their Mössbauer Characterization – Ferrates – ACS Symposium Series (ACS Publications)". Platinum Metals Review. 48 (4): 157–158. doi:10.1021/bk-2008-0985.ch007. However, its existence has been disputed.

[MetalAnions-60] 1 2 3 4 5 6 7 8 9 10 Fe(−4), Ru(−4), and Os(−4) have been observed in metal-rich compounds containing octahedral complexes [MIn_6−xSn_x]; Pt(−3) (as a dimeric anion [Pt–Pt]⁶⁻), Cu(−2), Zn(−2), Ag(−2), Cd(−2), Au(−2), and Hg(−2) have been observed (as dimeric and monomeric anions; dimeric ions were initially reported to be [T–T]²⁻ for Zn, Cd, Hg, but later shown to be [T–T]⁴⁻ for all these elements) in La₂Pt₂In, La₂Cu₂In, Ca₅Au₃, Ca₅Ag₃, Ca₅Hg₃, Sr₅Cd₃, Ca₅Zn₃(structure (AE²⁺)₅(T–T)⁴⁻T²⁻⋅4e⁻), Yb₃Ag₂, Ca₅Au₄, and Ca₃Hg₂; Au(–3) has been observed in ScAuSn and in other 18-electron half-Heusler compounds. See Changhoon Lee; Myung-Hwan Whangbo (2008). "Late transition metal anions acting as p-metal elements". Solid State Sciences. 10 (4): 444–449. Bibcode:2008SSSci..10..444K. doi:10.1016/j.solidstatesciences.2007.12.001. and Changhoon Lee; Myung-Hwan Whangbo; Jürgen Köhler (2010). "Analysis of Electronic Structures and Chemical Bonding of Metal-rich Compounds. 2. Presence of Dimer (T–T)^4– and Isolated T^2– Anions in the Polar Intermetallic Cr₅B₃-Type Compounds AE₅T₃ (AE = Ca, Sr; T = Au, Ag, Hg, Cd, Zn)". Zeitschrift für Anorganische und Allgemeine Chemie. 636 (1): 36–40. doi:10.1002/zaac.200900421.

[61] Ni(−2) has been observed in Li₂[Ni(1,5-COD)₂], see Jonas, Klaus (1975). "Dilithium-Nickel-Olefin Complexes. Novel Bimetal Complexes Containing a Transition Metal and a Main Group Metal". Angew. Chem. Int. Ed. 14 (11): 752–753. doi:10.1002/anie.197507521. and Ellis, John E. (2006). "Adventures with Substances Containing Metals in Negative Oxidation States". Inorganic Chemistry. 45 (8): 3167–86. doi:10.1021/ic052110i. PMID 16602773.

[62] Cu(0) has been observed in Cu(tris[2-(diisopropylphosphino)- phenyl]borane), see Moret, Marc-Etienne; Zhang, Limei; Peters, Jonas C. (2013). "A Polar Copper–Boron One-Electron σ-Bond". J. Am. Chem. Soc. 135 (10): 3792–3795. doi:10.1021/ja4006578. PMID 23418750.

[63] Zn(0) has been observed; see Singh, Amit Pratap; Samuel, Prinson P.; Roesky, Herbert W.; Schwarzer, Martin C.; Frenking, Gernot; Sidhu, Navdeep S.; Dittrich, Birger (2013). "A Singlet Biradicaloid Zinc Compound and Its Nonradical Counterpart". J. Am. Chem. Soc. 135 (19): 7324–9. doi:10.1021/ja402351x. PMID 23600486. and Soleilhavoup, Michèle; Bertrand, Guy (2015). "Cyclic (Alkyl)(Amino)Carbenes (CAACs): Stable Carbenes on the Rise". Acc. Chem. Res. 48 (2): 256–266. doi:10.1021/ar5003494. PMID 25515548.

[64] Zn(I) has been observed in decamethyldizincocene (Zn₂(η⁵–C₅Me₅)₂); see Resa, I.; Carmona, E.; Gutierrez-Puebla, E.; Monge, A. (2004). "Decamethyldizincocene, a Stable Compound of Zn(I) with a Zn-Zn Bond". Science. 305 (5687): 1136–8. Bibcode:2004Sci...305.1136R. doi:10.1126/science.1101356. PMID 15326350. S2CID 38990338.

[65] Zn(III) has been predicted to be stable in compounds with highly stabilized borane-based trianions, but no Zn(III) candidates are known experimentally; see Hong Fang; Huta Banjade; Deepika; Puru Jena (2021). "Realization of the Zn3+ oxidation state". Nanoscale. 13 (33): 14041–14048. doi:10.1039/D1NR02816B. PMID 34477685. S2CID 237400349.

[66] Ga(−2), Ga(−4), and Ga(−5) have been observed in the magnesium gallides MgGa, Mg₂Ga, and Mg₅Ga₂, respectively; see Patrick Hofmann. "Colture. Ein Programm zur interaktiven Visualisierung von Festkörperstrukturen sowie Synthese, Struktur und Eigenschaften von binären und ternären Alkali- und Erdalkalimetallgalliden" (PDF) (in German). p. 72.

[67] Ga(−3) has been observed in LaGa, see Dürr, Ines; Bauer, Britta; Röhr, Caroline (2011). "Lanthan-Triel/Tetrel-ide La(Al,Ga)_x(Si,Ge)_1-x. Experimentelle und theoretische Studien zur Stabilität intermetallischer 1:1-Phasen" (PDF). Z. Naturforsch. (in German). 66b: 1107–1121.

[68] Ga(0) has been observed in Gallium monoiodide among other gallium's oxidation states

[69] Ge(−1), Ge(−2), and Ge(−3) have been observed in germanides; see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Germanium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. pp. 953–959. ISBN 978-3-11-012641-9.

[70] As(0) has been observed; see Abraham, Mariham Y.; Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; Shaefer III, Henry F.; Schleyer, P. von R.; Robinson, Gregory H. (2010). "Carbene Stabilization of Diarsenic: From Hypervalency to Allotropy". Chemistry: A European Journal. 16 (2): 432–5. doi:10.1002/chem.200902840. PMID 19937872.

[71] As(I) has been observed in arsenic(I) iodide (AsI); see Ellis, Bobby D.; MacDonald, Charles L. B. (2004). "Stabilized Arsenic(I) Iodide: A Ready Source of Arsenic Iodide Fragments and a Useful Reagent for the Generation of Clusters". Inorganic Chemistry. 43 (19): 5981–6. doi:10.1021/ic049281s. PMID 15360247.

[72] As(IV) has been observed in arsenic(IV) hydroxide (As(OH)₄) and HAsO⁻; see Kläning, Ulrik K.; Bielski, Benon H. J.; Sehested, K. (1989). "Arsenic(IV). A pulse-radiolysis study". Inorganic Chemistry. 28 (14): 2717–24. doi:10.1021/ic00313a007.

[73] Se(−1) has been observed in diselenides(2−) (Se₂²⁻).

[74] A Se(0) atom has been identified using DFT in [ReOSe(2-pySe)₃]; see Cargnelutti, Roberta; Lang, Ernesto S.; Piquini, Paulo; Abram, Ulrich (2014). "Synthesis and structure of [ReOSe(2-Se-py)3]: A rhenium(V) complex with selenium(0) as a ligand". Inorganic Chemistry Communications. 45: 48–50. doi:10.1016/j.inoche.2014.04.003. ISSN 1387-7003.

[75] Se(I) has been observed in selenium(I) chloride (Se₂Cl₂); see "Selenium: Selenium(I) chloride compound data". WebElements.com. Retrieved 2007-12-10.

[76] Se(III) has been observed in Se₂NBr₃; see Lau, Carsten; Neumüller, Bernhard; Vyboishchikov, Sergei F.; Frenking, Gernot; Dehnicke, Kurt; Hiller, Wolfgang; Herker, Martin (1996). "Se₂NBr₃, Se₂NCl₅, Se₂NCl⁻₆: New Nitride Halides of Selenium(III) and Selenium(IV)". Chemistry: A European Journal. 2 (11): 1393–1396. doi:10.1002/chem.19960021108.

[77] Se(V) has been observed in SeO−3 and HSeO2−4; see Kläning, Ulrik K.; Sehested, K. (1986). "Selenium(V). A pulse radiolysis study". Inorganic Chemistry. 90 (21): 5460–4. doi:10.1021/j100412a112.

[78] Bromine(0) is present as an adduct in a copper-bromine complex, see Okrut, Alexander; Feldmann, Claus (5 March 2008). "{[P(o-tolyl)3]Br}2[Cu2Br6](Br2)—An Ionic Compound Containing Molecular Bromine". Inorganic Chemistry. 47 (8): 3084–3087. doi:10.1021/ic7021038. PMID 18318489.

[79] Br(II) is known to occur in bromine monoxide radical; see

[80] Sr(I) has been observed in strontium monofluoride (SrF); see Colarusso, P.; Guo, B.; Zhang, K.-Q.; Bernath, P.F. (1996). "High-Resolution Infrared Emission Spectrum of Strontium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 175 (1): 158–171. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2012-03-08.

[Cloke1993-81] 1 2 3 4 5 6 7 8 9 10 11 12 13 Yttrium and all lanthanides except Ce and Pm have been observed in the oxidation state 0 in bis(1,3,5-tri-t-butylbenzene) complexes, see Cloke, F. Geoffrey N. (1993). "Zero Oxidation State Compounds of Scandium, Yttrium, and the Lanthanides". Chem. Soc. Rev. 22: 17–24. doi:10.1039/CS9932200017. and Arnold, Polly L.; Petrukhina, Marina A.; Bochenkov, Vladimir E.; Shabatina, Tatyana I.; Zagorskii, Vyacheslav V.; Cloke (2003-12-15). "Arene complexation of Sm, Eu, Tm and Yb atoms: a variable temperature spectroscopic investigation". Journal of Organometallic Chemistry. 688 (1–2): 49–55. doi:10.1016/j.jorganchem.2003.08.028.

[82] Y(I) has been observed in yttrium(I) bromide (YBr); see Kaley A. Walker; Michael C. L. Gerry (1998). "The pure rotational spectrum of yttrium monobromide". The Journal of Chemical Physics. 109 (13): 5439–5445. doi:10.1063/1.477162.

[83] Y(II) has been observed in [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]; see MacDonald, M. R.; Ziller, J. W.; Evans, W. J. (2011). "Synthesis of a Crystalline Molecular Complex of Y²⁺, [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]". J. Am. Chem. Soc. 133 (40): 15914–17. doi:10.1021/ja207151y. PMID 21919538.

[84] Zr(−1) has been reported in [Zr(bipy)₃]⁻ (see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 960. ISBN 978-0-08-037941-8. and Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Zirconium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1413. ISBN 978-3-11-012641-9.), but was later shown to be Zr(+4); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–56. doi:10.1021/ic302799s. PMID 23387926.

[Zr0-85] 1 2 Zr(0) and Hf(0) occur in (η⁶-(1,3,5-^tBu)₃C₆H₃)₂M (M=Zr, Hf) and [(η⁵-C₅R₅M(CO)₄]⁻, see Chirik, P. J.; Bradley, C. A. (2007). "4.06 - Complexes of Zirconium and Hafnium in Oxidation States 0 to ii". Comprehensive Organometallic Chemistry III. From Fundamentals to Applications. Vol. 4. Elsevier Ltd. pp. 697–739. doi:10.1016/B0-08-045047-4/00062-5. ISBN 9780080450476.

[NbTa0-86] Complexes of Nb(0) and Ta(0) have been observed, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (2003). "4.5.7. Niobium(0) and Tantalum(0)". In J. A. McCleverty; T.J. Meyer (eds.). Comprehensive Coordination Chemistry II: From Biology to Nanotechnology. Vol. 4 (2 ed.). Newnes. pp. 297–299. ISBN 978-0-08-091316-2.

[NbTa-87] 1 2 Nb(I) and Ta(I) occur in CpNb(CO)₄ and CpTa(CO)₄, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Tantal". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1430. ISBN 978-3-11-012641-9. and King, R. Bruce (1969). Transition-Metal Organometallic Chemistry: An Introduction. Academic Press. p. 11. ISBN 978-0-32-315996-8.

[88] Tc(–1) occurs in HTc(CO)₅; see John E. Ellis (2003). "Metal Carbonyl Anions: from [Fe(CO)₄]₂^- to [Hf(CO)₆]₂^- and Beyond†". Organometallics. 22 (17): 3322–3338. doi:10.1021/om030105l. Tc(–3) is erroneously reported by Greenwood.

[89] George, G.N.; Klein, S.I.; Nixon, J.F. (1984). "Electron paramagnetic resonance spectroscopic studies on the zero-valent rhodium complex [Rh(P(OPrⁱ)₃)₄] at X-and Q-band frequencies". Chemical Physics Letters. 108 (6): 627–630. Bibcode:1984CPL...108..627G. doi:10.1016/0009-2614(84)85069-1.

[90] Rh(VII) is known in the RhO₃⁺ cation, see Da Silva Santos, Mayara; Stüker, Tony; Flach, Max; Ablyasova, Olesya S.; Timm, Martin; von Issendorff, Bernd; Hirsch, Konstantin; Zamudio‐Bayer, Vicente; Riedel, Sebastian; Lau, J. Tobias (2022). "The Highest Oxidation State of Rhodium: Rhodium(VII) in [RhO3]+". Angew. Chem. Int. Ed. 61 (38). doi:10.1002/anie.202207688. PMID 35818987. S2CID 250455408.

[91] Pd(I) has been observed; see Crabtree, R. H. (2002). "CHEMISTRY: A New Oxidation State for Pd?". Science. 295 (5553): 288–289. doi:10.1126/science.1067921. PMID 11786632. S2CID 94579227.

[92] Pd(III) has been observed; see Powers, D. C.; Ritter, T. (2011). "Palladium(III) in Synthesis and Catalysis" (PDF). Higher Oxidation State Organopalladium and Platinum Chemistry. Topics in Organometallic Chemistry. Vol. 35. pp. 129–156. Bibcode:2011hoso.book..129P. doi:10.1007/978-3-642-17429-2_6. ISBN 978-3-642-17428-5. PMC 3066514. PMID 21461129. Archived from the original (PDF) on June 12, 2013.

[93] Palladium(V) has been identified in complexes with organosilicon compounds containing pentacoordinate palladium; see Shimada, Shigeru; Li, Yong-Hua; Choe, Yoong-Kee; Tanaka, Masato; Bao, Ming; Uchimaru, Tadafumi (2007). "Multinuclear palladium compounds containing palladium centers ligated by five silicon atoms". Proceedings of the National Academy of Sciences. 104 (19): 7758–7763. doi:10.1073/pnas.0700450104. PMC 1876520. PMID 17470819.

[94] Palladium(VI) has been claimed to exist in Dagani, RON (2002). "New Palladium Oxidation State?". Chem. Eng. News. 80 (2): 8. doi:10.1021/cen-v080n002.p008., but this has been refuted showing it is a Palladium(II).

[95] The Ag⁻ ion has been observed in metal ammonia solutions: see Tran, N. E.; Lagowski, J. J. (2001). "Metal Ammonia Solutions: Solutions Containing Argentide Ions". Inorganic Chemistry. 40 (5): 1067–68. doi:10.1021/ic000333x.

[96] Ag(0) has been observed in carbonyl complexes in low-temperature matrices: see McIntosh, D.; Ozin, G. A. (1976). "Synthesis using metal vapors. Silver carbonyls. Matrix infrared, ultraviolet-visible, and electron spin resonance spectra, structures, and bonding of silver tricarbonyl, silver dicarbonyl, silver monocarbonyl, and disilver hexacarbonyl". J. Am. Chem. Soc. 98 (11): 3167–75. doi:10.1021/ja00427a018. Also, Ag(0) has been observed in [Ag₄py₂]_n, see Hoi Ri Moon; Cheol Ho Choi; Myunghyun Paik Suh (2008). "A Stair-Shaped Molecular Silver(0) Chain". Angewandte Chemie International Edition. 47 (44): 8390–93. doi:10.1002/anie.200803465. PMID 18830949.

[97] Cd(I) has been observed in cadmium(I) tetrachloroaluminate (Cd₂(AlCl₄)₂); see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Cadmium". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 1056–1057. ISBN 978-3-11-007511-3.

[98] In(–5) has been observed in La₃InGe, see Guloy, A. M.; Corbett, J. D. (1996). "Synthesis, Structure, and Bonding of Two Lanthanum Indium Germanides with Novel Structures and Properties". Inorganic Chemistry. 35 (9): 2616–22. doi:10.1021/ic951378e. PMID 11666477.

[99] In(−2) has been observed in Na₂In, see , p. 69.

[100] Unstable In(0) carbonyls and clusters have been detected, see , p. 6.

[101] Sn(−3) has been observed in [Sn₂]⁶⁻, e.g. in (Ba₂)⁴⁺(Mg₄)⁸⁺Sn⁴⁻(Sn₂)⁶⁻Sn²⁻ (with square (Sn²⁻)_n sheets), see Papoian, Garegin A.; Hoffmann, Roald (2000). "Hypervalent Bonding in One, Two, and Three Dimensions: Extending the Zintl–Klemm Concept to Nonclassical Electron-Rich Networks". Angew. Chem. Int. Ed. 2000 (39): 2408–2448. doi:10.1002/1521-3773(20000717)39:14<2408::aid-anie2408>3.0.co;2-u. PMID 10941096. Retrieved 2015-02-23.

[102] Sn(I) and Sn(III) have been observed in organotin compounds

[103] Sb(−2) has been observed in [Sb₂]⁴⁻, e.g. in RbBa₄[Sb₂][Sb][O], see Boss, Michael; Petri, Denis; Pickhard, Frank; Zönnchen, Peter; Röhr, Caroline (2005). "Neue Barium-Antimonid-Oxide mit den Zintl-Ionen [Sb]³⁻, [Sb₂]⁴⁻ und ¹_∞[Sb_n]ⁿ⁻ / New Barium Antimonide Oxides containing Zintl Ions [Sb]³⁻, [Sb₂]⁴⁻ and ¹_∞[Sb_n]ⁿ⁻". Zeitschrift für Anorganische und Allgemeine Chemie (in German). 631 (6–7): 1181–1190. doi:10.1002/zaac.200400546.

[104] Sb(0) has been observed, see Anastas Sidiropoulos (2019). "Studies of N-heterocyclic Carbene (NHC) Complexes of the Main Group Elements" (PDF). p. 39. doi:10.4225/03/5B0F4BDF98F60. S2CID 132399530.

[105] Sb(I) and Sb(II) have been observed in organoantimony compounds; for Sb(I), see Šimon, Petr; de Proft, Frank; Jambor, Roman; Růžička, Aleš; Dostál, Libor (2010). "Monomeric Organoantimony(I) and Organobismuth(I) Compounds Stabilized by an NCN Chelating Ligand: Syntheses and Structures". Angewandte Chemie International Edition. 49 (32): 5468–5471. doi:10.1002/anie.201002209. PMID 20602393.

[106] Sb(IV) has been observed in [SbCl₆]²⁻, see Nobuyoshi Shinohara; Masaaki Ohsima (2000). "Production of Sb(IV) Chloro Complex by Flash Photolysis of the Corresponding Sb(III) and Sb(V) Complexes in CH3CN and CHCl3". Bulletin of the Chemical Society of Japan. 73 (7): 1599–1604. doi:10.1246/bcsj.73.1599.

[107] Te(0) has been observed in tellurolates.

[108] Te(I) has been observed in tellurium iodide (TeI), see "Tellurium: tellurium iodide". WebElements.com. Retrieved 2015-02-23.

[109] Te(III) has been observed in [Te(N(SiMe₃)₂)₂]⁺, see Heinze, Thorsten; Roesky, Herbert W.; Pauer, Frank; Stalke, Dietmar; Sheldrick, George M. (1991). "Synthesis and Structure of the First Tellurium(III) Radical Cation". Angewandte Chemie International Edition. 30 (12): 1678. doi:10.1002/anie.199116771. Retrieved 2015-02-23.

[110] Te(V) is mentioned by Greenwood and Earnshaw, but they do not give any example of a Te(V) compound. What was long thought to be ditellurium decafluoride (Te₂F₁₀) is actually bis(pentafluorotelluryl) oxide, F₅TeOTeF₅: see Watkins, P. M. (1974). "Ditellurium decafluoride - A Continuing Myth". Journal of Chemical Education. 51 (9): 520–521. Bibcode:1974JChEd..51..520W. doi:10.1021/ed051p520. However, Te(V) has been observed in HTeO⁻, TeO⁻, HTeO−2, and TeO−3; see Kläning, Ulrik K.; Sehested, K. (2001). "Tellurium(V). A Pulse Radiolysis Study". The Journal of Physical Chemistry A. 105 (27): 6637–45. Bibcode:2001JPCA..105.6637K. doi:10.1021/jp010577i.

[111] Iodine(0) appears as I₂ in polymeric {Sb₂I₉^3--I₂}_x and {Bi₂I₉^3--I₂}_x polymeric complex anions: see Korobeynikov, Nikita A; Usoltsev, Andrey N; Abramov, Pavel A; Sokolov, Maxim N; Adonin, Sergey A (2 Dec 2022). "One-Dimensional Iodoantimonate(III) and Iodobismuthate(III) Supramolecular Hybrids with Diiodine: Structural Features, Stability and Optical Properties". Molecules. 27 (23): 8487. doi:10.3390/molecules27238487. PMC 9735928. PMID 36500578.

[112] I(II) is known to exist in monoxide (IO); see Nikitin, I V (31 August 2008). "Halogen monoxides". Russian Chemical Reviews. 77 (8): 739–749. Bibcode:2008RuCRv..77..739N. doi:10.1070/RC2008v077n08ABEH003788. S2CID 250898175.

[113] I(IV) has been observed in iodine dioxide (IO₂); see Pauling, Linus (1988). "Oxygen Compounds of Nonmetallic Elements". General Chemistry (3rd ed.). Dover Publications, Inc. p. 259. ISBN 978-0-486-65622-9.

[114] I(VI) has been observed in IO₃, IO₄²⁻, H₅IO₆⁻, H₂IO₅²⁻, H₄IO₆²⁻, and HIO₅³⁻; see Kläning, Ulrik K.; Sehested, Knud; Wolff, Thomas (1981). "Laser flash photolysis and pulse radiolysis of iodate and periodate in aqueous solution. Properties of iodine(VI)". J. Chem. Soc., Faraday Trans. 1. 77 (7): 1707–18. doi:10.1039/F19817701707.

[115] Xe compounds: see Xenon

[116] Xe(0) has been observed in tetraxenonogold(II) (AuXe₄²⁺).

[117] Xe(I) has been reported in xenon hexafluoroplatinate and xenon hexafluororhodate (see Pauling, Linus (1988). General Chemistry (3rd ed.). Dover Publications, Inc. p. 250. ISBN 978-0-486-65622-9.), however these compounds were later found to contain Xe(II).

[118] Ba(I) has been observed in barium monofluoride (BaF); see Colarusso, P.; Guo, B.; Zhang, K.-Q.; Bernath, P.F. (1995). "High-Resolution Fourier Transform Infrared Emission Spectrum of Barium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 170 (1): 59. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2005-03-10.

[LnI-119] 1 2 3 4 La(I), Pr(I), Tb(I), Tm(I), and Yb(I) have been observed in MB₈⁻ clusters; see Li, Wan-Lu; Chen, Teng-Teng; Chen, Wei-Jia; Li, Jun; Wang, Lai-Sheng (2021). "Monovalent lanthanide(I) in borozene complexes". Nature Communications. 12 (1): 6467. doi:10.1038/s41467-021-26785-9. PMC 8578558. PMID 34753931.

[120] Pr(I) has been observed in [PrB₄]⁻; see Chen, Xin; Chen, Teng-Teng; Li, Wang-Lu; Lu, Jun-Bo; Zhao, Li-Juan; Jian, Tian; Hu, Han-Shi; Wang, Lai-Sheng; Li, Jun (2018-12-13). "Lanthanides with Unusually Low Oxidation States in the PrB₃^– and PrB₄^– Boride Clusters". Inorganic Chemistry. 58 (1): 411–418. doi:10.1021/acs.inorgchem.8b02572. PMID 30543295. S2CID 56148031.

[121] Pr(V) has been observed in [PrO₂]⁺; see Zhang, Qingnan; Hu, Shu-Xian; Qu, Hui; Su, Jing; Wang, Guanjun; Lu, Jun-Bo; Chen, Mohua; Zhou, Mingfei; Li, Jun (2016-06-06). "Pentavalent Lanthanide Compounds: Formation and Characterization of Praseodymium(V) Oxides". Angewandte Chemie International Edition. 55 (24): 6896–6900. doi:10.1002/anie.201602196. ISSN 1521-3773. PMID 27100273.

[122] Hu, Shu-Xian; Jian, Jiwen; Su, Jing; Wu, Xuan; Li, Jun; Zhou, Mingfei (2017). "Pentavalent lanthanide nitride-oxides: NPrO and NPrO− complexes with N≡Pr triple bonds". Chemical Science. 8 (5): 4035–4043. doi:10.1039/C7SC00710H. ISSN 2041-6520. PMC 5434915. PMID 28580119.

[123] Nd(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5

[Lanthanides-124] 1 2 3 4 5 All the lanthanides (La–Lu) in the +2 oxidation state have been observed (except La, Gd, Lu) in dilute, solid solutions of dihalides of these elements in alkaline earth dihalides (see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5) and (except Pm) in organometallic molecular complexes, see Lanthanides Topple Assumptions and Meyer, G. (2014). "All the Lanthanides Do It and Even Uranium Does Oxidation State +2". Angewandte Chemie International Edition. 53 (14): 3550–51. doi:10.1002/anie.201311325. PMID 24616202.. Additionally, all the lanthanides (La–Lu) form dihydrides (LnH₂), dicarbides (LnC₂), monosulfides (LnS), monoselenides (LnSe), and monotellurides (LnTe), but for most elements these compounds have Ln³⁺ ions with electrons delocalized into conduction bands, e. g. Ln³⁺(H⁻)₂(e⁻).

[125] SmB6- cluster anion has been reported and contains Sm in rare oxidation state of +1; see Paul, J. Robinson; Xinxing, Zhang; Tyrel, McQueen; Kit, H. Bowen; Anastassia, N. Alexandrova (2017). "SmB₆^– Cluster Anion: Covalency Involving f Orbitals". J. Phys. Chem. A 2017, 121, 8, 1849–1854. 121 (8): 1849–1854. doi:10.1021/acs.jpca.7b00247. PMID 28182423..

[126] Dy(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5

[127] Hf(I) has been observed in hafnium monobromide (HfBr), see Marek, G.S.; Troyanov, S.I.; Tsirel'nikov, V.I. (1979). "Кристаллическое строение и термодинамические характеристики монобромидов циркония и гафния / Crystal structure and thermodynamic characteristics of monobromides of zirconium and hafnium". Журнал неорганической химии / Russian Journal of Inorganic Chemistry (in Russian). 24 (4): 890–893.

[128] Re(–3) and Re(–1) occurs in Na₃[Re(CO)₄] and HRe(CO)₅ respectively; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1046. ISBN 978-0-08-037941-8.

[129] Os(−1) has been observed in Na[Os(CO)₁₃]; see Krause, J.; Siriwardane, Upali; Salupo, Terese A.; Wermer, Joseph R.; Knoeppel, David W.; Shore, Sheldon G. (1993). "Preparation of [Os₃(CO)₁₁]²⁻ and its reactions with Os₃(CO)₁₂; structures of [Et₄N] [HOs₃(CO)₁₁] and H₂OsS₄(CO)". Journal of Organometallic Chemistry. 454 (1–2): 263–271. doi:10.1016/0022-328X(93)83250-Y. and Carter, Willie J.; Kelland, John W.; Okrasinski, Stanley J.; Warner, Keith E.; Norton, Jack R. (1982). "Mononuclear hydrido alkyl carbonyl complexes of osmium and their polynuclear derivatives". Inorganic Chemistry. 21 (11): 3955–3960. doi:10.1021/ic00141a019.

[130] Ir(−3) has been observed in Ir(CO)₃³⁻; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1117. ISBN 978-0-08-037941-8.

[131] Ir(–2) has been observed in IrVO₂^–; see Le-Shi Chen; Yun-Zhu Liu; Jiao-Jiao Chen; Si-Dun Wang; Tong-Mei Ma; Xiao-Na Li; Sheng-Gui He (2022). "Water–Gas Shift Catalyzed by Iridium–Vanadium Oxide Clusters IrVO₂^– with Iridium in a Rare Oxidation State of −II". The Journal of Physical Chemistry A. 126 (32): 5294–5301. doi:10.1021/acs.jpca.2c03974.

[132] Ir(VII) has been observed in [(η²-O₂)IrO₂]⁺; see C&EN: Iridium dressed to the nines.

[133] Ir(VIII) has been observed in iridium tetroxide (IrO₄); see Gong, Yu; Zhou, Mingfei; Kaupp, Martin; Riedel, Sebastian (2009). "Formation and Characterization of the Iridium Tetroxide Molecule with Iridium in the Oxidation State +VIII". Angewandte Chemie International Edition. 48 (42): 7879–7883. doi:10.1002/anie.200902733. PMID 19593837.

[134] Ir(IX) has been observed in IrO+4; see Wang, Guanjun; Zhou, Mingfei; Goettel, James T.; Schrobilgen, Gary G.; Su, Jing; Li, Jun; Schlöder, Tobias; Riedel, Sebastian (21 August 2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786. S2CID 4463905.

[135] Pt(−1) and Pt(−2) have been observed in the barium platinides BaPt and Ba₂Pt, respectively: see Karpov, Andrey; Konuma, Mitsuharu; Jansen, Martin (2006). "An experimental proof for negative oxidation states of platinum: ESCA-measurements on barium platinides". Chemical Communications (8): 838–840. doi:10.1039/b514631c. PMID 16479284.

[136] Pt(I) and Pt(III) have been observed in bimetallic and polymetallic species; see Kauffman, George B.; Thurner, Joseph J.; Zatko, David A. (1967). "Ammonium Hexachloroplatinate(IV)". Inorganic Syntheses. Vol. 9. pp. 182–185. doi:10.1002/9780470132401.ch51. ISBN 978-0-470-13240-1.

[137] Au(0) has been observed, see Mézaille, Nicolas; Avarvari, Narcis; Maigrot, Nicole; Ricard, Louis; Mathey, François; Le Floch, Pascal; Cataldo, Laurent; Berclaz, Théo; Geoffroy, Michel (1999). "Gold(I) and Gold(0) Complexes of Phosphinine‐Based Macrocycles". Angewandte Chemie International Edition. 38 (21): 3194–3197. doi:10.1002/(SICI)1521-3773(19991102)38:21<3194::AID-ANIE3194>3.0.CO;2-O. PMID 10556900.

[138] Hg(IV) has been reported in mercury(IV) fluoride (HgF₄); see Xuefang Wang; Lester Andrews; Sebastian Riedel; Martin Kaupp (2007). "Mercury Is a Transition Metal: The First Experimental Evidence for HgF₄". Angew. Chem. Int. Ed. 46 (44): 8371–8375. doi:10.1002/anie.200703710. PMID 17899620. However, it could not be confirmed by later experiments; see Young, Nigel (2016-07-12). "Is mercury a transition metal?". University of Hull. Archived from the original on 2016-10-12.

[139] Tl(−5) has been observed in Na₂₃K₉Tl_15.3, see Dong, Z.-C.; Corbett, J. D. (1996). "Na₂₃K₉Tl_15.3: An Unusual Zintl Compound Containing Apparent Tl₅⁷⁻, Tl₄⁸⁻, Tl₃⁷⁻, and Tl⁵⁻ Anions". Inorganic Chemistry. 35 (11): 3107–12. doi:10.1021/ic960014z. PMID 11666505.

[140] Tl(−1) has been observed in caesium thallide (CsTl); see King, R. B.; Schleyer, R. (2004). "Theory and concepts in main-group cluster chemistry". In Driess, M.; Nöth, H. (eds.). Molecular clusters of the main group elements. Wiley-VCH, Chichester. p. 19. ISBN 978-3-527-61437-0.

[141] Tl(+2) has been observed in tetrakis(hypersilyl)dithallium ([(Me₃Si)Si]₂Tl—Tl[Si(SiMe₃)]₂), see Sonja Henkel; Dr. Karl Wilhelm Klinkhammer; Dr. Wolfgang Schwarz (1994). "Tetrakis(hypersilyl)dithallium(Tl—Tl): A Divalent Thallium Compound". Angew. Chem. Int. Ed. 33 (6): 681–683. doi:10.1002/anie.199406811.

[142] Pb(−2) has been observed in BaPb, see Ferro, Riccardo (2008). Nicholas C. Norman (ed.). Intermetallic Chemistry. Elsevier. p. 505. ISBN 978-0-08-044099-6. and Todorov, Iliya; Sevov, Slavi C. (2004). "Heavy-Metal Aromatic Rings: Cyclopentadienyl Anion Analogues Sn₅⁶⁻ and Pb₅⁶⁻ in the Zintl Phases Na₈BaPb₆, Na₈BaSn₆, and Na₈EuSn₆". Inorganic Chemistry. 43 (20): 6490–94. doi:10.1021/ic000333x.

[143] Pb(0) carbonyls have been observered in reaction between lead atoms and carbon monoxide; see Ling, Jiang; Qiang, Xu (2005). "Observation of the lead carbonyls Pb_nCO (n=1–4): Reactions of lead atoms and small clusters with carbon monoxide in solid argon". The Journal of Chemical Physics. 122 (3): 034505. 122 (3): 34505. Bibcode:2005JChPh.122c4505J. doi:10.1063/1.1834915. ISSN 0021-9606. PMID 15740207. Also, Pb(0) has been observed in [Si^II(Xant)Si^II]PbFe(CO)₄; see Jian Xu; Sudip Pan; Shenglai Yao; Gernot Frenking; Matthias Driess (2022). "The Heaviest Bottleable Metallylone: Synthesis of a Monatomic, Zero-Valent Lead Complex ("Plumbylone")". Angewandte Chemie International Edition. 61 (38): e202209442. doi:10.1002/anie.202209442. PMC 9545849. PMID 35848899.

[144] Pb(+1) and Pb(+3) have been observed in organolead compounds, e.g. hexamethyldiplumbane Pb₂(CH₃)₆; for Pb(I), see Siew-Peng Chia; Hong-Wei Xi; Yongxin Li; Kok Hwa Lim; Cheuk-Wai So (2013). "A Base-Stabilized Lead(I) Dimer and an Aromatic Plumbylidenide Anion". Angew. Chem. Int. Ed. 52 (24): 6298–6301. doi:10.1002/anie.201301954. PMID 23629949.

[145] Bi(−2) and Bi(−1) occur in Zintl phases, e.g. (Ca²⁺)₂₂[Bi₄]⁴⁻([Bi₂]⁴⁻)₄[Bi³⁻]₈; see Ponou, Siméon (2006). "Germanides, Germanide-Tungstate Double Salts and Substitution Effects in Zintl Phases". Technische Universität München. Lehrstuhl für Anorganische Chemie mit Schwerpunkt Neue Materialien. p. 68.

[146] Bi(0) state is known to exist in a N-heterocyclic carbene complex of dibismuthene; see Deka, Rajesh; Orthaber, Andreas (May 6, 2022). "Carbene chemistry of arsenic, antimony, and bismuth: origin, evolution and future prospects". Royal Society of Chemistry. 51 (22): 8540–8556. doi:10.1039/d2dt00755j. PMID 35578901. S2CID 248675805.

[147] Bi(I) has been observed in bismuth monobromide (BiBr) and bismuth monoiodide (BiI); see Godfrey, S. M.; McAuliffe, C. A.; Mackie, A. G.; Pritchard, R. G. (1998). Nicholas C. Norman (ed.). Chemistry of arsenic, antimony, and bismuth. Springer. pp. 67–84. ISBN 978-0-7514-0389-3.

[148] Bi(+2) has been observed in dibismuthines (R₂Bi—BiR₂), see Ashe, Arthur J. III (1990). "Thermochromic Distibines and Dibismuthines". Advances in Organometallic Chemistry. 30: 77–97. doi:10.1016/S0065-3055(08)60499-2. ISBN 9780120311309.

[149] Bi(IV) has been observed; see A. I. Aleksandrov, I. E. Makarov (1987). "Formation of Bi(II) and Bi(IV) in aqueous hydrochloric solutions of Bi(III)". Bulletin of the Academy of Sciences of the USSR, Division of Chemical Science. 36 (2): 217–220. doi:10.1007/BF00959349. S2CID 94865394.

[150] Po(V) has been observed in dioxidopolonium(1+) (PoO⁺); see Thayer, John S. (2010). "Relativistic Effects and the Chemistry of the Heavier Main Group Elements". Relativistic Methods for Chemists. Challenges and Advances in Computational Chemistry and Physics. Vol. 10. p. 78. doi:10.1007/978-1-4020-9975-5_2. ISBN 978-1-4020-9974-8.

[151] Rn(II) has been observed in radon difluoride (RnF₂); see Stein, L. (1970). "Ionic Radon Solution". Science. 168 (3929): 362–4. Bibcode:1970Sci...168..362S. doi:10.1126/science.168.3929.362. PMID 17809133. S2CID 31959268. and Kenneth S. Pitzer (1975). "Fluorides of radon and element 118". J. Chem. Soc., Chem. Commun. (18): 760b–761. doi:10.1039/C3975000760b.

[152] Rn(IV) is reported by Greenwood and Earnshaw, but is not known to exist; see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. Vol. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.

[153] Rn(VI) is known in radon trioxide (RnO₃); see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. Vol. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.

[154] Th(-I) and U(-I) have been detected in the gas phase as octacarbonyl anions; see Chaoxian, Chi; Sudip, Pan; Jiaye, Jin; Luyan, Meng; Mingbiao, Luo; Lili, Zhao; Mingfei, Zhou; Gernot, Frenking (2019). "Octacarbonyl Ion Complexes of Actinides [An(CO)₈]^+/− (An=Th, U) and the Role of f Orbitals in Metal–Ligand Bonding". Chemistry (Weinheim an der Bergstrasse, Germany). 25 (50): 11772–11784. 25 (50): 11772–11784. doi:10.1002/chem.201902625. ISSN 0947-6539. PMC 6772027. PMID 31276242.

[155] Th(I) is known in thorium(I) bromide (ThBr); see Wickleder, Mathias S.; Fourest, Blandine; Dorhout, Peter K. (2006). "Thorium". In Morss, Lester R.; Edelstein, Norman M.; Fuger, Jean (eds.). The Chemistry of the Actinide and Transactinide Elements (PDF). Vol. 3 (3rd ed.). Dordrecht, the Netherlands: Springer. pp. 52–160. doi:10.1007/1-4020-3598-5_3. ISBN 978-1-4020-3555-5. Archived from the original (PDF) on 2016-03-07.

[156] Th(II) and Th(III) are observed in [Th^II{η⁵-C₅H₃(SiMe₃)₂}₃]⁻ and [Th^III{η⁵-C₅H₃(SiMe₃)₂}₃], see Langeslay, Ryan R.; Fieser, Megan E.; Ziller, Joseph W.; Furche, Philip; Evans, William J. (2015). "Synthesis, structure, and reactivity of crystalline molecular complexes of the {[C₅H₃(SiMe₃)₂]₃Th}¹⁻ anion containing thorium in the formal +2 oxidation state". Chem. Sci. 6 (1): 517–521. doi:10.1039/C4SC03033H. PMC 5811171. PMID 29560172.

[157] Pa(II) occurs in proctactinium(II) oxide

[158] Th(-I) and U(-I) have been detected in the gas phase as octacarbonyl anions; see Chaoxian, Chi; Sudip, Pan; Jiaye, Jin; Luyan, Meng; Mingbiao, Luo; Lili, Zhao; Mingfei, Zhou; Gernot, Frenking (2019). "Octacarbonyl Ion Complexes of Actinides [An(CO)₈]^+/− (An=Th, U) and the Role of f Orbitals in Metal–Ligand Bonding". Chemistry (Weinheim an der Bergstrasse, Germany). 25 (50): 11772–11784. 25 (50): 11772–11784. doi:10.1002/chem.201902625. ISSN 0947-6539. PMC 6772027. PMID 31276242.

[159] U(I) has been observed in uranium monofluoride (UF) and uranium monochloride (UCl), see Sykes, A. G. (1990). "Compounds of Thorium and Uranium". Advances in Inorganic Chemistry. Vol. 34. Academic Press. pp. 87–88. ISBN 978-0-12-023634-3. Retrieved 22 March 2015. Also, U(I) has been observed in [U(η⁵-C₅ⁱPr₅)₂]⁻, see Barluzzi, Luciano; Giblin, Sean R.; Mansikkamäki, Akseli; Layfield, Richard A. (2022). "Identification of Oxidation State +1 in a Molecular Uranium Complex". J. Am. Chem. Soc. 144 (40): 18229–18233. doi:10.1021/jacs.2c06519. PMID 36169550. S2CID 252567088. Retrieved 13 July 2023.

[160] U(II) has been observed in [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U], see MacDonald, Matthew R.; Fieser, Megan E.; Bates, Jefferson E.; Ziller, Joseph W.; Furche, Filipp; Evans, William J. (2013). "Identification of the +2 Oxidation State for Uranium in a Crystalline Molecular Complex, [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U]". J. Am. Chem. Soc. 135 (36): 13310–13313. doi:10.1021/ja406791t. PMID 23984753.

[Dutkiewicz2017-161] Np(II), (III) and (IV) have been observed, see Dutkiewicz, Michał S.; Apostolidis, Christos; Walter, Olaf; Arnold, Polly L (2017). "Reduction chemistry of neptunium cyclopentadienide complexes: from structure to understanding". Chem. Sci. 8 (4): 2553–2561. doi:10.1039/C7SC00034K. PMC 5431675. PMID 28553487.

[162] Pu(II) has been observed in {Pu[C₅H₃(SiMe₃)₂]₃}−; see Windorff, Cory J.; Chen, Guo P; Cross, Justin N; Evans, William J.; Furche, Filipp; Gaunt, Andrew J.; Janicke, Michael T.; Kozimor, Stosh A.; Scott, Brian L. (2017). "Identification of the Formal +2 Oxidation State of Plutonium: Synthesis and Characterization ofref name="curium5" {Pu^II[C₅H₃(SiMe₃)₂]₃}−". J. Am. Chem. Soc. 139 (11): 3970–3973. doi:10.1021/jacs.7b00706. PMID 28235179.

[163] Pu(VIII) has been observed in PuO₄; see Nikonov, M. V.; Kiselev, Yu. M.; Tananaev, I. G.; Myasoedov, B. F. (March 2011). "Plutonium volatility in ozonization of alkaline solutions of Pu(VI) hydroxo complexes". Doklady Chemistry. 437 (1): 69–71. doi:10.1134/S0012500811030104. S2CID 95951175. Also see Kiselev, Yu. M.; Nikonov, M. V.; Dolzhenko, V. D.; Ermilov, A. Yu.; Tananaev, I. G.; Myasoedov, B. F. (17 January 2014). "On existence and properties of plutonium(VIII) derivatives". Radiochimica Acta. 102 (3): 227–237. doi:10.1515/ract-2014-2146. S2CID 100915090.

[164] Am(VII) has been observed in AmO−5; see Americium, Das Periodensystem der Elemente für den Schulgebrauch (The periodic table of elements for schools) chemie-master.de (in German), Retrieved 28 November 2010 and Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1265. ISBN 978-0-08-037941-8.

[Dau2017-165] 1 2 3 Cm(V), Bk(V), and Cf(V) have been observed in BkO₂⁺, CfO₂⁺, CmO₂(NO₃)₂⁻, BkO₂(NO₃)₂⁻, and CfO₂(NO₃)₂⁻; see Dau, Phuong Diem; Vasiliu, Monica; Peterson, Kirk A; Dixon, David A; Gibsoon, John K (October 2017). "Remarkably High Stability of Late Actinide Dioxide Cations: Extending Chemistry to Pentavalent Berkelium and Californium". Chemistry - A European Journal. 23 (68): 17369–17378. doi:10.1002/chem.201704193. PMID 29024093.

[Kovács2018-166] 1 2 3 Kovács, Attila; Dau, Phuong D.; Marçalo, Joaquim; Gibson, John K. (2018). "Pentavalent Curium, Berkelium, and Californium in Nitrate Complexes: Extending Actinide Chemistry and Oxidation States". Inorg. Chem. American Chemical Society. 57 (15): 9453–9467. doi:10.1021/acs.inorgchem.8b01450. OSTI 1631597. PMID 30040397. S2CID 51717837.

[167] Cm(VI) has been observed in curium trioxide (CmO₃) and dioxidocurium(2+) (CmO+2); see Domanov, V. P.; Lobanov, Yu. V. (October 2011). "Formation of volatile curium(VI) trioxide CmO₃". Radiochemistry. 53 (5): 453–6. doi:10.1134/S1066362211050018. S2CID 98052484.

[168] Cm(VIII) has been reported to possibly occur in curium tetroxide (CmO₄); see Domanov, V. P. (January 2013). "Possibility of generation of octavalent curium in the gas phase in the form of volatile tetraoxide CmO₄". Radiochemistry. 55 (1): 46–51. doi:10.1134/S1066362213010098. S2CID 98076989. However, new experiments seem to indicate its nonexistence: Zaitsevskii, Andréi; Schwarz, W H Eugen (April 2014). "Structures and stability of AnO4 isomers, An = Pu, Am, and Cm: a relativistic density functional study". Physical Chemistry Chemical Physics. 2014 (16): 8997–9001. Bibcode:2014PCCP...16.8997Z. doi:10.1039/c4cp00235k. PMID 24695756.

[Peterson-169] Peterson, J. R.; Hobart, D. E. (1984). "The Chemistry of Berkelium". In Emeléus, Harry Julius (ed.). Advances in inorganic chemistry and radiochemistry. Vol. 28. Academic Press. pp. 29–64. doi:10.1016/S0898-8838(08)60204-4. ISBN 978-0-12-023628-2.

[FOOTNOTEPetersonHobart198455-170] Peterson & Hobart 1984, p. 55.

[171] Sullivan, Jim C.; Schmidt, K. H.; Morss, L. R.; Pippin, C. G.; Williams, C. (1988). "Pulse radiolysis studies of berkelium(III): preparation and identification of berkelium(II) in aqueous perchlorate media". Inorganic Chemistry. 27 (4): 597. doi:10.1021/ic00277a005.

[172] Es(IV) is known in einsteinium(IV) fluoride (EsF₄); see Kleinschmidt, P. (1994). "Thermochemistry of the actinides". Journal of Alloys and Compounds. 213–214: 169–172. doi:10.1016/0925-8388(94)90898-2.

[173] Db(V) has been observed in dubnium pentachloride (DbCl₅); see H. W. Gäggeler (2007). "Gas Phase Chemistry of Superheavy Elements" (PDF). Paul Scherrer Institute. pp. 26–28. Archived from the original (PDF) on 2012-02-20.

[174] Sg(VI) has been observed in seaborgium oxide hydroxide (SgO₂(OH)₂); see Huebener, S.; Taut, S.; Vahle, A.; Dressler, R.; et al. (2001). "Physico-chemical characterization of seaborgium as oxide hydroxide" (PDF). Radiochim. Acta. 89 (11–12): 737–741. doi:10.1524/ract.2001.89.11-12.737. S2CID 98583998. Archived from the original (PDF) on 2014-10-25.

[175] Sg(0) has been observed in seaborgium hexacarbonyl (Sg(CO)₆); see Even, J.; Yakushev, A.; Dullmann, C. E.; Haba, H.; et al. (2014). "Synthesis and detection of a seaborgium carbonyl complex". Science. 345 (6203): 1491–3. Bibcode:2014Sci...345.1491E. doi:10.1126/science.1255720. PMID 25237098. S2CID 206558746.

[176] Bh(VII) has been observed in bohrium oxychloride (BhO₃Cl); see Eichler R, Düllmann C, Gäggeler HW, Eichler B, et al. "Gas chemical investigation of bohrium (Bh, element 107)" (PDF). GSI Annual Report 2000. Archived from the original (PDF) on 2008-02-28. Retrieved 2008-02-29.

[177] Hs(VIII) has been observed in hassium tetroxide (HsO₄); see "Chemistry of Hassium" (PDF). Gesellschaft für Schwerionenforschung mbH. 2002. Retrieved 2007-01-31.

[178] Cn(II) has been observed in copernicium selenide (CnSe); see "Annual Report 2015: Laboratory of Radiochemistry and Environmental Chemistry" (PDF). Paul Scherrer Institute. 2015. p. 3.

[179] Langmuir, Irving (1919). "The arrangement of electrons in atoms and molecules". J. Am. Chem. Soc. 41 (6): 868–934. doi:10.1021/ja02227a002. Archived from the original on 2019-06-21. Retrieved 2019-07-01.

[180] "Antoine Laurent Lavoisier The Chemical Revolution – Landmark – American Chemical Society". American Chemical Society. Archived from the original on 5 January 2021. Retrieved 14 July 2018.

[181] "Lavoisier on Elements". Chem125-oyc.webspace.yale.edu. Archived from the original on 13 June 2020. Retrieved 14 July 2018.

[182] Wöhler, F. (1835). Grundriss der Chemie: Unorganische Chemie [Foundations of Chemistry: Inorganic Chemistry]. Berlin: Duncker und Humblot. p. 4.

[183] Jensen, W. B. (2007). "the origin of the oxidation-state concept". J. Chem. Educ. 84 (9): 1418–1419. Bibcode:2007JChEd..84.1418J. doi:10.1021/ed084p1418.

[184] Stock, A. (1919). "Einige Nomenklaturfragen der anorganischen Chemie" [Some nomenclature issues of inorganic chemistry]. Angew. Chem. 32 (98): 373–374. Bibcode:1919AngCh..32..373S. doi:10.1002/ange.19190329802. Archived from the original on 2020-08-06. Retrieved 2019-07-01.

[1940IUPACinorgnom-185] 1 2 Jorissen, W. P.; Bassett, H.; Damiens, A.; Fichter, F.; Rémy, H. (1941). "Rules for naming inorganic compounds". J. Am. Chem. Soc. 63: 889–897. doi:10.1021/ja01849a001.

[186] Latimer, W. M. (1938). The Oxidation States of the Elements and their Potentials in Aqueous Solutions (1st ed.). Prentice-Hall.

[187] Bray, W. C.; Branch, G. E. K. (1913). "Valence and tautomerism". J. Am. Chem. Soc. 35 (10): 1440–1447. doi:10.1021/ja02199a003. Archived from the original on 2021-02-09. Retrieved 2019-09-16.

[188] Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, I. The oxidation and reduction reactions". J. Am. Chem. Soc. 57 (7): 1221–1229. doi:10.1021/ja01310a018.

[189] Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, II. The oxidation state of argentic salts". J. Am. Chem. Soc. 57 (7): 1229–1237. doi:10.1021/ja01310a019.

[190] Fernelius, W. C. (1948). "Some problems of inorganic nomenclature". Chem. Eng. News. 26: 161–163. doi:10.1021/cen-v026n003.p161.

[191] Fernelius, W. C.; Larsen, E. M.; Marchi, L. E.; Rollinson, C. L. (1948). "Nomenclature of coördination compounds". Chem. Eng. News. 26 (8): 520–523. doi:10.1021/cen-v026n008.p520.

[192] Pauling, L. (1948). "The modern theory of valency". J. Chem. Soc. 1948: 1461–1467. doi:10.1039/JR9480001461. PMID 18893624. Archived from the original on 2021-12-07. Retrieved 2021-11-22.

[193] Calvert, J. G. (1990). "IUPAC Recommendation 1990". Pure Appl. Chem. 62: 2204. doi:10.1351/pac199062112167.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

[27]

[28]

[29]

[30]

[31]

[32]

[33]

[34]

[35]

[36]

[37]

[38]

[39]

[40]

[41]

[42]

[43]

[44]

[45]

[46]

[47]

[48]

[49]

[50]

[51]

[52]

[53]

[54]

[55]

[56]

[57]

[58]

[59]

[60]

[61]

[62]

[63]

[64]

[65]

[66]

[67]

[68]

[69]

[70]

[71]

[72]

[73]

[74]

[75]

[76]

[77]

[78]

[79]

[80]

[81]

[82]

[83]

[84]

[85]

[86]

[87]

[88]

[89]

[90]

[91]

[92]

[93]

[94]

[95]

[96]

[97]

[98]

[99]

[100]

Oxides
Mixed oxidation states	Antimony tetroxide (Sb₂O₄) Boron suboxide (B₁₂O₂) Carbon suboxide (C₃O₂) Chlorine perchlorate (Cl₂O₄) Chloryl perchlorate (Cl₂O₆) Cobalt(II,III) oxide (Co₃O₄) Dichlorine pentoxide (Cl₂O₅) Iron(II,III) oxide (Fe₃O₄) Lead(II,IV) oxide (Pb₃O₄) Manganese(II,III) oxide (Mn₃O₄) Mellitic anhydride (C₁₂O₉) Praseodymium(III,IV) oxide (Pr₆O₁₁) Silver(I,III) oxide (Ag₂O₂) Terbium(III,IV) oxide (Tb₄O₇) Tribromine octoxide (Br₃O₈) Triuranium octoxide (U₃O₈)
+1 oxidation state	Aluminium(I) oxide (Al₂O) Copper(I) oxide (Cu₂O) Caesium monoxide (Cs₂O) Dicarbon monoxide (C₂O) Dichlorine monoxide (Cl₂O) Gallium(I) oxide (Ga₂O) Iodine(I) oxide (I₂O) Lithium oxide (Li₂O) Mercury(I) oxide (Hg₂O) Nitrous oxide (N₂O) Potassium oxide (K₂O) Rubidium oxide (Rb₂O) Silver oxide (Ag₂O) Thallium(I) oxide (Tl₂O) Sodium oxide (Na₂O) Water (hydrogen oxide) (H₂O)
+2 oxidation state	Aluminium(II) oxide (AlO) Barium oxide (BaO) Beryllium oxide (BeO) Bromine monoxide (BrO) Cadmium oxide (CdO) Calcium oxide (CaO) Carbon monoxide (CO) Chlorine monoxide (ClO) Chromium(II) oxide (CrO) Cobalt(II) oxide (CoO) Copper(II) oxide (CuO) Dinitrogen dioxide (N₂O₂) Europium(II) oxide (EuO) Germanium monoxide (GeO) Iron(II) oxide (FeO) Iodine monoxide (IO) Lead(II) oxide (PbO) Magnesium oxide (MgO) Manganese(II) oxide (MnO) Mercury(II) oxide (HgO) Nickel(II) oxide (NiO) Nitric oxide (NO) Palladium(II) oxide (PdO) Phosphorus monoxide (PO) Polonium monoxide (PoO) Protactinium monoxide (PaO) Radium oxide (RaO) Silicon monoxide (SiO) Strontium oxide (SrO) Sulfur monoxide (SO) Disulfur dioxide (S₂O₂) Thorium monoxide (ThO) Tin(II) oxide (SnO) Titanium(II) oxide (TiO) Vanadium(II) oxide (VO) Zinc oxide (ZnO)
+3 oxidation state	Actinium(III) oxide (Ac₂O₃) Aluminium oxide (Al₂O₃) Americium(III) oxide (Am₂O₃) Antimony trioxide (Sb₂O₃) Arsenic trioxide (As₂O₃) Berkelium(III) oxide (Bk₂O₃) Bismuth(III) oxide (Bi₂O₃) Boron trioxide (B₂O₃) Caesium sesquioxide (Cs₂O₃) Californium(III) oxide (Cf₂O₃) Cerium(III) oxide (Ce₂O₃) Chromium(III) oxide (Cr₂O₃) Cobalt(III) oxide (Co₂O₃) Dinitrogen trioxide (N₂O₃) Dysprosium(III) oxide (Dy₂O₃) Einsteinium(III) oxide (Es₂O₃) Erbium(III) oxide (Er₂O₃) Europium(III) oxide (Eu₂O₃) Gadolinium(III) oxide (Gd₂O₃) Gallium(III) oxide (Ga₂O₃) Gold(III) oxide (Au₂O₃) Holmium(III) oxide (Ho₂O₃) Indium(III) oxide (In₂O₃) Iron(III) oxide (Fe₂O₃) Lanthanum oxide (La₂O₃) Lutetium(III) oxide (Lu₂O₃) Manganese(III) oxide (Mn₂O₃) Neodymium(III) oxide (Nd₂O₃) Nickel(III) oxide (Ni₂O₃) Phosphorus trioxide (P₄O₆) Praseodymium(III) oxide (Pr₂O₃) Promethium(III) oxide (Pm₂O₃) Rhodium(III) oxide (Rh₂O₃) Samarium(III) oxide (Sm₂O₃) Scandium oxide (Sc₂O₃) Terbium(III) oxide (Tb₂O₃) Thallium(III) oxide (Tl₂O₃) Thulium(III) oxide (Tm₂O₃) Titanium(III) oxide (Ti₂O₃) Tungsten(III) oxide (W₂O₃) Vanadium(III) oxide (V₂O₃) Ytterbium(III) oxide (Yb₂O₃) Yttrium(III) oxide (Y₂O₃)
+4 oxidation state	Americium dioxide (AmO₂) Berkelium(IV) oxide (BkO₂) Bromine dioxide (BrO₂) Californium dioxide (CfO₂) Carbon dioxide (CO₂) Carbon trioxide (CO₃) Cerium(IV) oxide (CeO₂) Chlorine dioxide (ClO₂) Chromium(IV) oxide (CrO₂) Curium(IV) oxide (CmO₂) Dinitrogen tetroxide (N₂O₄) Germanium dioxide (GeO₂) Iodine dioxide (IO₂) Hafnium(IV) oxide (HfO₂) Lead dioxide (PbO₂) Manganese dioxide (MnO₂) Neptunium(IV) oxide (NpO₂) Nitrogen dioxide (NO₂) Osmium dioxide (OsO₂) Plutonium(IV) oxide (PuO₂) Polonium dioxide (PoO₂) Praseodymium(IV) oxide (PrO₂) Protactinium(IV) oxide (PaO₂) Rhodium(IV) oxide (RhO₂) Ruthenium(IV) oxide (RuO₂) Selenium dioxide (SeO₂) Silicon dioxide (SiO₂) Sulfur dioxide (SO₂) Technetium(IV) oxide (TcO₂) Tellurium dioxide (TeO₂) Terbium(IV) oxide (TbO₂) Thorium dioxide (ThO₂) Tin dioxide (SnO₂) Titanium dioxide (TiO₂) Tungsten(IV) oxide (WO₂) Uranium dioxide (UO₂) Vanadium(IV) oxide (VO₂) Zirconium dioxide (ZrO₂)
+5 oxidation state	Antimony pentoxide (Sb₂O₅) Arsenic pentoxide (As₂O₅) Bismuth pentoxide (Bi₂O₅) Dinitrogen pentoxide (N₂O₅) Niobium pentoxide (Nb₂O₅) Phosphorus pentoxide (P₂O₅) Protactinium(V) oxide (Pa₂O₅) Tantalum pentoxide (Ta₂O₅) Vanadium(V) oxide (V₂O₅)
+6 oxidation state	Chromium trioxide (CrO₃) Molybdenum trioxide (MoO₃) Polonium trioxide (PoO₃) Rhenium trioxide (ReO₃) Selenium trioxide (SeO₃) Sulfur trioxide (SO₃) Tellurium trioxide (TeO₃) Tungsten trioxide (WO₃) Uranium trioxide (UO₃) Xenon trioxide (XeO₃)
+7 oxidation state	Dichlorine heptoxide (Cl₂O₇) Manganese heptoxide (Mn₂O₇) Rhenium(VII) oxide (Re₂O₇) Technetium(VII) oxide (Tc₂O₇)
+8 oxidation state	Iridium tetroxide (IrO₄) Osmium tetroxide (OsO₄) Ruthenium tetroxide (RuO₄) Xenon tetroxide (XeO₄) Hassium tetroxide (HsO₄)
Related	Oxocarbon Suboxide Oxyanion Ozonide Peroxide Superoxide Oxypnictide
Oxides are sorted by oxidation state. Category:Oxides

IUPAC definition

Determination

Simple approach without bonding considerations

Algorithm of assigning bonds

The algorithm's caveat

Algorithm of summing bond orders

Applied to a Lewis structure

Applied to bond graph

Balancing redox

Appearances

Nominal oxidation states

Ambiguous oxidation states

Oxidation-state determination from resonance formulas

A physical measurement is needed to determine oxidation state

Ambiguous/arbitrary oxidation states

Fractional oxidation states

Elements with multiple oxidation states

Oxidation state in metals

List of oxidation states of the elements

Early forms (octet rule)

Use in nomenclature

History of the oxidation state concept

Early days

Use in nomenclature

Development towards the current concept

See also

References